That's not the question.
The question is:
Can you play any in your computer any other video NOT from your camera.
ET
Michael Havens writes:
> The videos showed fine on the camera and any new films I create are fine on
> the camera.
> :-)~MIKE~(-:
>
>
> On Sat, Jan 26, 2013 at 1:34 PM, kitepilot@kitepilot.com <
> kitepilot@kitepilot.com> wrote:
>
>> Please validate that the problem shows up only with your camera.
>> Or not...
>> ET
>>
>> Michael Havens writes:
>>
>>> Well, I rebooted and ran ONLY vlc but that didn't help any. So I loaded a
>>> live cd but again that didn't help any.
>>> So here is lspci:
>>> 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor
>>> Root
>>> Complex
>>> 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI
>>> Wrestler [Radeon HD 6250]
>>> 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI
>>> SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
>>> 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI
>>> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
>>> 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI
>>> SB7x0/SB8x0/SB9x0 USB EHCI Controller
>>> 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller
>>> (rev 42)
>>> 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia
>>> (Intel HDA) (rev 40)
>>> 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0
>>> LPC host controller (rev 40)
>>> 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI
>>> Bridge (rev 40)
>>> 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI
>>> SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
>>> 00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900
>>> PCI to PCI bridge (PCIE port 0)
>>> 00:15.1 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900
>>> PCI to PCI bridge (PCIE port 1)
>>> 00:15.3 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI
>>> bridge (PCIE port 3)
>>> 00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI
>>> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
>>> 00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI
>>> SB7x0/SB8x0/SB9x0 USB EHCI Controller
>>> 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
>>> Function 0 (rev 43)
>>> 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
>>> Function 1
>>> 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
>>> Function 2
>>> 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
>>> Function 3
>>> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
>>> Function 4
>>> 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
>>> Function 6
>>> 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
>>> Function 5
>>> 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor
>>> Function 7
>>> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209
>>> PCI Express Card Reader (rev 01)
>>> 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>>> RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
>>> 07:00.0 Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R
>>> PCIe
>>> :-)~MIKE~(-:
>>>
>>> On Sat, Jan 26, 2013 at 6:45 AM, kitepilot@kitepilot.com <
>>> kitepilot@kitepilot.com> wrote:
>>>
>>>> Michael, I have seen this happening for (stupid) reasons as having a
>>>> browser running!
>>>> Try this:
>>>> Boot the box fresh and try to run VLC, preferable with known good video
>>>> file.
>>>> If you still have problems, then boot the box with a live CD, install VLC
>>>> and try again.
>>>> If that one fails too, please publish the output of 'lspci'.
>>>> ET
>>>>
>>>>
>>>> Michael Havens writes:
>>>>
>>>>> well, I upgraded from mint 13 to 14 in the hopes that would fix my video
>>>>> woes but that didn't help any. I also increased the cache for vlc (a
>>>>> possible solution) but that was not a help as well. So I have to choose
>>>>> between vlc, totem, and mplayer; vlc freezes at the first frame while
>>>>> audio
>>>>> continues normally; totem plays slowly and the audio stops after saying,
>>>>> 'Hello Michael' (the first sound on the video) but it doesn't seem to
>>>>> have
>>>>> any interlacing associated with the video; mplayer needs deinterlacing
>>>>> and
>>>>> the video is slow but the audio plays normally. So vlc has the least
>>>>> wrong
>>>>> with it:D Any ideas on what to do?
>>>>> :-)~MIKE~(-:
>>>>>
>>>> ------------------------------****---------------------
>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.****org<
>>>> PLUG-discuss@lists.**phxlinux.org <PLUG-discuss@lists.phxlinux.org>>
>>>>
>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>> http://lists.phxlinux.org/****mailman/listinfo/plug-discuss<http://lists.phxlinux.org/**mailman/listinfo/plug-discuss>
>>>> <**http://lists.phxlinux.org/**mailman/listinfo/plug-discuss<http://lists.phxlinux.org/mailman/listinfo/plug-discuss>>
>>>>
>>>>
>>> ------------------------------**---------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.**org<PLUG-discuss@lists.phxlinux.org>
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.phxlinux.org/**mailman/listinfo/plug-discuss<http://lists.phxlinux.org/mailman/listinfo/plug-discuss>
>>
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)