Hi Michael,
On Thu, Jun 14, 2012 at 5:29 PM, Michael Butash <
michael@butash.net> wrote:
> Looks like you're not getting actual link - is the link up?
>
> sudo mii-tool eth0
>
> should see:
>
> eth0: negotiated 1000baseT-FD flow-control, link ok
>
> Should also see blinky lights on the nic.
>
> Do you use a dock with it? They sometimes switch between dock and
> build-in causing one or the other not to work or link, even sometimes
> getting stuck, but that's usually a driver/os thing.
>
> -mb
>
> Good call, this can be hard coded in the /etc/network/interfaces as in my
post.
> On 06/14/2012 05:20 PM, Mark Phillips wrote:
>
>> I installed Ubuntu 12.04 on a Dell Latitude D620. I didn't expect any
>> issues based on googling this laptop and Linux. However, I cannot get
>> Ethernet or wifi to work.
>>
>> lspci shows the correct hardware
>>
>> Ethernet controller; Broadcom Corporation NetXtreme BCM5752 Gigibit
>> Ethernet PCI Express (rev 2)
>> Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
>>
>> I went into Network Connections and added a Wired connection and gave it
>> a name and selected the MAc address for eth0 (in the drop down list),
>> and selected automatic (DHCP) as the method for iP4
>>
>> I looked at /etc/network/interfaces
>> auto lo
>> iface lo inet loopback
>>
>> so I tried adding
>>
>> auto eth0
>>
>> but no luck. grep -i eth /var/log/syslog gives
>>
>> Network Manager[2029]: <info> (eth0): new Ethernet device (driver:'tg3'
>> ifindex: 2)
>> Network Manager[2029]: <info> (eth0): exported as
>> /org/freedesktop/**NetworkManager/Devices/0
>> Network Manager[2029]: <info> (eth0): mow managed
>> Network Manager[2029]: <info> (eth0): device state change: unmanaged ->
>> unavailable (reason 'managed') [10 2 0 2]
>> Network Manager[2029]: <info> (eth0): bringing up device
>> Network Manager[2029]: <info> (eth0): preparing device
>> Network Manager[2029]: <info> (eth0): deactivating device (reason
>> 'managed') [2]
>> kernel: [1815.448547] ADDRCONF(NETDEV_UP): eth0: link is not ready
>> kernel: [1815.449321] ADDRCONF(NETDEV_UP): eth0: link is not ready
>>
>> I looked at some forum posts on how to fix this, and the best I found
>> was to edit NetworkManager.conf and set managed=true (it came false out
>> of the box). That did not help.
>>
>> Thanks for any other suggestions you may have!
>>
>> Mark
>>
>>
>> ------------------------------**---------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.plug.**phoenix.az.us<PLUG-discuss@lists.plug.phoenix.az.us>
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.PLUG.phoenix.az.**us/mailman/listinfo/plug-**discuss<http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss>
>>
> ------------------------------**---------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.**phoenix.az.us<PLUG-discuss@lists.plug.phoenix.az.us>
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.**us/mailman/listinfo/plug-**discuss<http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss>
>
--
(503) 754-4452 Android
(623) 239-3392 Skype
(623) 688-3392 Google Voice
**
<
http://it-clowns.com>Safeway.com
Automation Engineer
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)