Re: attach XP computer to network fror printing

>>>>     server string = %h server (Samba, Ubuntu)
>>>>     interfaces = 192.168.0.2/24, eth0
>>>>     map to guest = Bad User
>>>>     obey pam restrictions = Yes
>>>>     pam password change = Yes

>>>>     passwd program = /usr/bin/passwd %u
>>>>     passwd chat = *Enter\snew\s*\spassword:* %n\n
>>>> *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
>>>>     unix password sync = Yes
>>>>     syslog = 0
>>>>     log file = /var/log/samba/log.%m

>>>>     max log size = 1000
>>>>     smb ports = 137 138 139 445
>>>>     dns proxy = No
>>>>     usershare allow guests = Yes

>>>>     panic action = /usr/share/samba/panic-action %d

>>>> [printers]
>>>>     comment = All Printers
>>>>     path = /var/spool/samba
>>>>     create mask = 0700
>>>>     printable = Yes
>>>>     browseable = No

>>>> [print$]
>>>>     comment = Printer Drivers
>>>>     path = /var/lib/samba/printers
>>>> bmike1@Michaels-PC:~$

>>>>>> #======================= Global Settings =======================
>>>>>> [global]
>>>>>> #opening ports for printer
>>>>>> smb ports = 137 138 139 445
>>>>>> ## Browsing/Identification ###
>>>>>> # Change this to the workgroup/NT-domain name your Samba server will
>>>>>> part of
>>>>>>    workgroup = WORKGROUP
>>>>>> # server string is the equivalent of the NT Description field
>>>>>>  server string = %h server (Samba, Ubuntu)
>>>>>> # Windows Internet Name Serving Support Section:
>>>>>> # WINS Support - Tells the NMBD component of Samba to enable its WINS
>>>>>> Server
>>>>>> #   wins support = no
>>>>>> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
>>>>>> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT
>>>>>> both
>>>>>> ;   wins server = w.x.y.z
>>>>>> # This will prevent nmbd to search for NetBIOS names through DNS.
>>>>>>    dns proxy = no
>>>>>> # What naming service and in what order should we use to resolve host
>>>>>> names
>>>>>> # to IP addresses
>>>>>> ;   name resolve order = lmhosts host wins bcast
>>>>>> #### Networking ####
>>>>>> # The specific set of interfaces / networks to bind to
>>>>>> # This can be either the interface name or an IP address/netmask;
>>>>>> # interface names are normally preferred
>>>>>> ;   interfaces = 127.0.0.0/8 eth0
>>>>>> interface 192.168.0.2/24 eth0
>>>>>> # Only bind to the named interfaces and/or networks; you must use the
>>>>>> # 'interfaces' option above to use this.
>>>>>> # It is recommended that you enable this feature if your Samba
>>>>>> machine is
>>>>>> # not protected by a firewall or is a firewall itself.  However, this
>>>>>> # option cannot handle dynamic or non-broadcast interfaces correctly.
>>>>>> ;   bind interfaces only = yes
>>>>>> #### Debugging/Accounting ####
>>>>>> # This tells Samba to use a separate log file for each machine
>>>>>> # that connects
>>>>>>    log file = /var/log/samba/log.%m
>>>>>> # Cap the size of the individual log files (in KiB).
>>>>>>    max log size = 1000
>>>>>> # If you want Samba to only log through syslog then set the following
>>>>>> # parameter to 'yes'.
>>>>>> #   syslog only = no
>>>>>> # We want Samba to log a minimum amount of information to syslog.
>>>>>> Everything
>>>>>> # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to
>>>>>> log
>>>>>> # through syslog you should set the following parameter to something
>>>>>> higher.
>>>>>>    syslog = 0
>>>>>> # Do something sensible when Samba crashes: mail the admin a backtrace
>>>>>>    panic action = /usr/share/samba/panic-action %d
>>>>>> ####### Authentication #######
>>>>>> # "security = user" is always a good idea. This will require a Unix
>>>>>> account
>>>>>> # in this server for every user accessing the server. See
>>>>>> # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
>>>>>> # in the samba-doc package for details.
>>>>>> #   security = user
>>>>>> # You may wish to use password encryption.  See the section on
>>>>>> # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
>>>>>>    encrypt passwords = true
>>>>>> # If you are using encrypted passwords, Samba will need to know what
>>>>>> # password database type you are using.
>>>>>>    passdb backend = tdbsam
>>>>>>    obey pam restrictions = yes
>>>>>> # This boolean parameter controls whether Samba attempts to sync the
>>>>>> Unix
>>>>>> # password with the SMB password when the encrypted SMB password in
>>>>>> the
>>>>>> # passdb is changed.
>>>>>>    unix password sync = yes
>>>>>> # For Unix password sync to work on a Debian GNU/Linux system, the
>>>>>> following
>>>>>> # parameters must be set (thanks to Ian Kahan <<
>>>>>> kahan@informatik.tu-muenchen.de> for
>>>>>> # sending the correct chat script for the passwd program in Debian
>>>>>> Sarge).
>>>>>>    passwd program = /usr/bin/passwd %u
>>>>>>    passwd chat = *Enter\snew\s*\spassword:* %n\n
>>>>>> *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
>>>>>> # This boolean controls whether PAM will be used for password changes
>>>>>> # when requested by an SMB client instead of the program listed in
>>>>>> # 'passwd program'. The default is 'no'.
>>>>>>    pam password change = yes
>>>>>> # This option controls how unsuccessful authentication attempts are
>>>>>> mapped
>>>>>> # to anonymous connections
>>>>>>    map to guest = bad user
>>>>>> ########## Domains ###########
>>>>>> # Is this machine able to authenticate users. Both PDC and BDC
>>>>>> # must have this setting enabled. If you are the BDC you must
>>>>>> # change the 'domain master' setting to no
>>>>>> #
>>>>>> ;   domain logons = yes
>>>>>> #
>>>>>> # The following setting only takes effect if 'domain logons' is set
>>>>>> # It specifies the location of the user's profile directory
>>>>>> # from the client point of view)
>>>>>> # The following required a [profiles] share to be setup on the
>>>>>> # samba server (see below)
>>>>>> ;   logon path = \\%N\profiles\%U
>>>>>> # Another common choice is storing the profile in the user's home
>>>>>> directory
>>>>>> # (this is Samba's default)
>>>>>> #   logon path = \\%N\%U\profile
>>>>>> # The following setting only takes effect if 'domain logons' is set
>>>>>> # It specifies the location of a user's home directory (from the
>>>>>> client
>>>>>> # point of view)
>>>>>> ;   logon drive = H:
>>>>>> #   logon home = \\%N\%U
>>>>>> # The following setting only takes effect if 'domain logons' is set
>>>>>> # It specifies the script to run during logon. The script must be
>>>>>> stored
>>>>>> # in the [netlogon] share
>>>>>> # NOTE: Must be store in 'DOS' file format convention
>>>>>> ;   logon script = logon.cmd
>>>>>> # This allows Unix users to be created on the domain controller via
>>>>>> the SAMR
>>>>>> # RPC pipe.  The example command creates a user account with a
>>>>>> disabled Unix
>>>>>> # password; please adapt to your needs
>>>>>> ; add user script = /usr/sbin/adduser --quiet --disabled-password
>>>>>> --gecos "" %u
>>>>>> # This allows machine accounts to be created on the domain controller
>>>>>> via the
>>>>>> # SAMR RPC pipe.
>>>>>> # The following assumes a "machines" group exists on the system
>>>>>> ; add machine script  = /usr/sbin/useradd -g machines -c "%u machine
>>>>>> account" -d /var/lib/samba -s /bin/false %u
>>>>>> # This allows Unix groups to be created on the domain controller via
>>>>>> the SAMR
>>>>>> # RPC pipe.
>>>>>> ; add group script = /usr/sbin/addgroup --force-badname %g
>>>>>> ########## Printing ##########
>>>>>> # If you want to automatically load your printer list rather
>>>>>> # than setting them up individually then you'll need this
>>>>>> #   load printers = yes
>>>>>> # lpr(ng) printing. You may wish to override the location of the
>>>>>> # printcap file
>>>>>> ;   printing = bsd
>>>>>> ;   printcap name = /etc/printcap
>>>>>> # CUPS printing.  See also the cupsaddsmb(8) manpage in the
>>>>>> # cupsys-client package.
>>>>>> ;   printing = cups
>>>>>> ;   printcap name = cups
>>>>>> ############ Misc ############
>>>>>> # Using the following line enables you to customise your configuration
>>>>>> # on a per machine basis. The %m gets replaced with the netbios name
>>>>>> # of the machine that is connecting
>>>>>> ;   include = /home/samba/etc/smb.conf.%m
>>>>>> # Most people will find that this option gives better performance.
>>>>>> # See smb.conf(5) and
>>>>>> /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
>>>>>> # for details
>>>>>> # You may want to add the following on a Linux system:
>>>>>> #         SO_RCVBUF=8192 SO_SNDBUF=8192
>>>>>> #   socket options = TCP_NODELAY
>>>>>> # The following parameter is useful only if you have the linpopup
>>>>>> package
>>>>>> # installed. The samba maintainer and the linpopup maintainer are
>>>>>> # working to ease installation and configuration of linpopup and
>>>>>> samba.
>>>>>> ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm
>>>>>> %s' &
>>>>>> # Domain Master specifies Samba to be the Domain Master Browser. If
>>>>>> this
>>>>>> # machine will be configured as a BDC (a secondary logon server), you
>>>>>> # must set this to 'no'; otherwise, the default behavior is
>>>>>> recommended.
>>>>>> #   domain master = auto
>>>>>> # Some defaults for winbind (make sure you're not using the ranges
>>>>>> # for something else.)
>>>>>> ;   idmap uid = 10000-20000
>>>>>> ;   idmap gid = 10000-20000
>>>>>> ;   template shell = /bin/bash
>>>>>> # The following was the default behaviour in sarge,
>>>>>> # but samba upstream reverted the default because it might induce
>>>>>> # performance issues in large organizations.
>>>>>> # See Debian bug #368251 for some of the consequences of *not*
>>>>>> # having this setting and smb.conf(5) for details.
>>>>>> ;   winbind enum groups = yes
>>>>>> ;   winbind enum users = yes
>>>>>> # Setup usershare options to enable non-root users to share folders
>>>>>> # with the net usershare command.

>>>>>> # Allow users who've been granted usershare privileges to create
>>>>>> # public shares, not just authenticated ones
>>>>>>    usershare allow guests = yes

>>>>>> [printers]
>>>>>>    comment = All Printers
>>>>>>    browseable = no
>>>>>>    path = /var/spool/samba
>>>>>>    printable = yes
>>>>>>    guest ok = no
>>>>>>    read only = yes
>>>>>>    create mask = 0700

>>>>>> # Windows clients look for this share name as a source of downloadable
>>>>>> # printer drivers
>>>>>> [print$]
>>>>>>    comment = Printer Drivers
>>>>>>    path = /var/lib/samba/printers
>>>>>>    browseable = yes
>>>>>>    read only = yes
>>>>>>    guest ok = no
>>>>>> # Uncomment to allow remote administration of Windows print drivers.
>>>>>> # You may need to replace 'lpadmin' with the name of the group your
>>>>>> # admin users are members of.
>>>>>> # Please note that you also need to set appropriate Unix permissions
>>>>>> # to the drivers directory for these users to have write rights in it
>>>>>> ;   write list = root, @lpadmin

>>>>>> # The next two parameters show how to auto-mount a CD-ROM when the
>>>>>> #    cdrom share is accesed. For this to work /etc/fstab must contain
>>>>>> #    an entry like this:
>>>>>> #
>>>>>> #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
>>>>>> #
>>>>>> # The CD-ROM gets unmounted automatically after the connection to the
>>>>>> #
>>>>>> # If you don't want to use auto-mounting/unmounting make sure the CD
>>>>>> #    is mounted on /cdrom
>>>>>> #
>>>>>> ;   preexec = /bin/mount /cdrom
>>>>>> ;   postexec = /bin/umount /cdrom