Well, my brother is up and on the internet!
On Sun, Nov 20, 2011 at 2:00 PM, Michael Havens <
bmike1@gmail.com> wrote:
> thanks guys
>
>
> On Sun, Nov 20, 2011 at 1:21 PM, Derek Trotter <expat.arizonan@gmail.com>wrote:
>
>> Here's a site I have bookmarked. I just checked and it's still there.
>>
>> http://www.incentre.net/content/view/75/2/
>>
>> It will show you what color wires to put where.
>>
>>
>> On 11/20/2011 13:05, Bryan O'Neal wrote:
>>
>> Just remember there is no magic to it. You have 2 wires for TX and 2
>> for RX. As long as the wires match on each end (pin 1 to pin 1, pin 2
>> to pin 2, etc.) it does not matter what color they are.
>>
>> On 11/20/11, Brian Cluff <brian@snaptek.com> <brian@snaptek.com> wrote:
>>
>> First off, you shouldn't need to strip the wires when putting them into
>> the jack, The jacks are designed to cut through the shielding and make
>> a connection directly though the shielding. In fact, I'll bet that the
>> connections are much more likely to corrode if you strip them first.
>>
>> As for the color sequence. They change a bit depending on what style of
>> jack you have and how much the wires twist inside the jack itself. Just
>> go ahead and wire up the jack in the color order that the jack dictates
>> and it shouldn't matter if they are in different physical orders on the
>> back of the jack.
>>
>> As for the Jack that shows yellow brown white red etc... It sounds like
>> you got a hold of an rj45 based telecom jack. I would take that back
>> and get one that is made for networking. You could probably get it to
>> work just fine if you can figure out the correct wiring order, but why
>> not do it right in the first place...
>>
>> Brian
>>
>> On 11/20/2011 11:28 AM, Michael Havens wrote:
>>
>> So I'm connecting my brothers computer to the internet . I ran the wire
>> under the house yesterday (I let him do that... I didn't want to get
>> dirty) and drilled a hole today and fed the cable through the hole. Then
>> I stripped the cable; first the blue pair, then the green pair, the.....
>> I'm sure you get the point. Anyways I'm all excited because now I'm
>> going to connect the wires to the jack, then I'll do the other side,
>> then my brother is in business! Except I sit down to connect the other
>> side when I see a nightmare: instead of blue-green-orange-brown wires
>> the colors of the wires are blue, orange, black, red, green, yellow,
>> brown, and white; each designated with a number: 1 to 8. Any idea how I
>> should wire these?
>>
>> --
>> :-)~MIKE~(-:
>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>> To subscribe, unsubscribe, or to change your mail settings:http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>> To subscribe, unsubscribe, or to change your mail settings:http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>
>
>
>
> --
> :-)~MIKE~(-:
>
--
:-)~MIKE~(-:
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)