Re: Help. I think my boot sector craped out

>     mount /dev/hda1 /mnt/hda1 ?

>>>> root@1[hda1]# dmesg
>>>> [17179569.184000] Linux version 2.6.15-27-desktop (root@mepis-pro)
>>>> (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sun Mar 11
>>>> 21:36:14 EDT 2007
>>>> [17179569.184000] BIOS-provided physical RAM map:
>>>> [17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800
>>>> (usable)
>>>> [17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000
>>>> (reserved)
>>>> [17179569.184000]  BIOS-e820: 00000000000e0000 - 0000000000100000
>>>> (reserved)
>>>> [17179569.184000]  BIOS-e820: 0000000000100000 - 0000000047eb0000
>>>> (usable)
>>>> [17179569.184000]  BIOS-e820: 0000000047eb0000 - 0000000047efc000 (ACPI
>>>> data)
>>>> [17179569.184000]  BIOS-e820: 0000000047efc000 - 0000000047efd000 (ACPI
>>>> NVS)
>>>> [17179569.184000]  BIOS-e820: 0000000047efd000 - 0000000047f00000
>>>> (reserved)
>>>> [17179569.184000]  BIOS-e820: 0000000047f00000 - 0000000047f80000
>>>> (usable)
>>>> [17179569.184000]  BIOS-e820: 0000000047f80000 - 0000000048000000
>>>> (reserved)
>>>> [17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec10000
>>>> (reserved)
>>>> [17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000
>>>> (reserved)
>>>> [17179569.184000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000
>>>> (reserved)
>>>> [17179569.184000]  BIOS-e820: 00000000fff00000 - 0000000100000000
>>>> (reserved)
>>>> [17179569.184000] 255MB HIGHMEM available.
>>>> [17179569.184000] 896MB LOWMEM available.
>>>> [17179569.184000] found SMP MP-table at 000f5f70
>>>> [17179569.184000] On node 0 totalpages: 294784
>>>> [17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
>>>> [17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
>>>> [17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
>>>> [17179569.184000]   HighMem zone: 65408 pages, LIFO batch:15
>>>> [17179569.184000] DMI present.
>>>> [17179569.184000] ACPI: RSDP (v000 PTLTD
>>>>    ) @ 0x000f5fc0
>>>> [17179569.184000] ACPI: RSDT (v001 PTLTD    RSDT   0x060400d0  LTP
>>>> 0x00000000) @ 0x47ef87f8
>>>> [17179569.184000] ACPI: FADT (v001 IBM    MARLIN   0x060400d0 PTL
>>>> 0x00000001) @ 0x47efbf0a
>>>> [17179569.184000] ACPI: MADT (v001 PTLTD         APIC   0x060400d0
>>>> LTP 0x00000000) @ 0x47efbf7e
>>>> [17179569.184000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x060400d0  LTP
>>>> 0x00000001) @ 0x47efbfd8
>>>> [17179569.184000] ACPI: DSDT (v001    IBM   Marlin 0x060400d0 MSFT
>>>> 0x0100000d) @ 0x00000000
>>>> [17179569.184000] ACPI: PM-Timer IO Port: 0x1008
>>>> [17179569.184000] ACPI: Local APIC address 0xfee00000
>>>> [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>>>> [17179569.184000] Processor #0 15:1 APIC version 20
>>>> [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>>>> [17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000]
>>>> gsi_base[0])
>>>> [17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000,
>>>> GSI
>>>> 0-23
>>>> [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high
>>>> edge)
>>>> [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
>>>> level)
>>>> [17179569.184000] ACPI: IRQ0 used by override.
>>>> [17179569.184000] ACPI: IRQ2 used by override.
>>>> [17179569.184000] ACPI: IRQ9 used by override.
>>>> [17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>>>> [17179569.184000] Using ACPI (MADT) for SMP configuration information
>>>> [17179569.184000] Allocating PCI resources starting at 50000000 (gap:
>>>> 48000000:b6c00000)
>>>> [17179569.184000] Built 1 zonelists
>>>> [17179569.184000] Kernel command line: us init=/etc/init apm=power-off
>>>> vga=791 quiet
>>>> [17179569.184000] mapped APIC to ffffd000 (fee00000)
>>>> [17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
>>>> [17179569.184000] Initializing CPU#0
>>>> [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
>>>> [17179569.184000] Detected 1595.056 MHz processor.
>>>> [17179569.184000] Using pmtmr for high-res timesource
>>>> [17179569.184000] Console: colour dummy device 80x25
>>>> [17179569.260000] Dentry cache hash table entries: 131072 (order: 7,
>>>> 524288 bytes)
>>>> [17179569.260000] Inode-cache hash table entries: 65536 (order: 6,
>>>> 262144
>>>> bytes)
>>>> [17179569.328000] Memory: 1162020k/1179136k available (2741k kernel
>>>> code, 15876k reserved, 931k data, 192k init, 261312k highmem)
>>>> [17179569.328000] Checking if this processor honours the WP bit even
>>>> in supervisor mode... Ok.
>>>> [17179569.408000] Calibrating delay using timer specific routine..
>>>> 3193.56 BogoMIPS (lpj=6387123)
>>>> [17179569.408000] Security Framework v1.0.0 initialized
>>>> [17179569.408000] SELinux:  Disabled at boot.
>>>> [17179569.408000] Capability LSM initialized
>>>> [17179569.408000] Mount-cache hash table entries: 512
>>>> [17179569.408000] CPU: After generic identify, caps: 3febfbff 00000000
>>>> 00000000 00000000 00000000 00000000 00000000
>>>> [17179569.408000] CPU: After vendor identify, caps: 3febfbff 00000000
>>>> 00000000 00000000 00000000 00000000 00000000
>>>> [17179569.408000] CPU: Trace cache: 12K uops, L1 D cache: 8K
>>>> [17179569.408000] CPU: L2 cache: 256K
>>>> [17179569.408000] CPU: After all inits, caps: 3febfbff 00000000
>>>> 00000000 00000080 00000000 00000000 00000000
>>>> [17179569.408000] Intel machine check architecture supported.
>>>> [17179569.408000] Intel machine check reporting enabled on CPU#0.
>>>> [17179569.408000] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>>>> [17179569.408000] CPU0: Thermal monitoring enabled
>>>> [17179569.408000] mtrr: v2.0 (20020519)
>>>> [17179569.408000] CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02
>>>> [17179569.408000] Enabling fast FPU save and restore... done.
>>>> [17179569.408000] Enabling unmasked SIMD FPU exception support... done.
>>>> [17179569.408000] Checking 'hlt' instruction... OK.
>>>> [17179569.424000] checking if image is initramfs...it isn't (no cpio
>>>> magic); looks like an initrd
>>>> [17179569.596000] Freeing initrd memory: 1491k freed
>>>> [17179569.600000] ACPI: Looking for DSDT ... not found!
>>>> [17179569.608000] ENABLING IO-APIC IRQs
>>>> [17179569.608000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>>>> [17179569.752000] NET: Registered protocol family 16
>>>> [17179569.752000] ACPI: bus type pci registered
>>>> [17179569.752000] PCI: PCI BIOS revision 2.10 entry at 0xfd933, last
>>>> bus=2
>>>> [17179569.752000] PCI: Using configuration type 1
>>>> [17179569.752000] ACPI: Subsystem revision 20051216
>>>> [17179569.752000] ACPI: Interpreter enabled
>>>> [17179569.752000] ACPI: Using IOAPIC for interrupt routing
>>>> [17179569.756000] ACPI: PCI Root Bridge [PCI0] (0000:00)
>>>> [17179569.756000] PCI: Probing PCI hardware (bus 00)
>>>> [17179569.780000] PCI quirk: region 1000-107f claimed by ICH4
>>>> ACPI/GPIO/TCO
>>>> [17179569.780000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>>>> [17179569.780000] Boot video device is 0000:01:00.0
>>>> [17179569.780000] PCI: Transparent bridge - 0000:00:1e.0
>>>> [17179569.780000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>>>> [17179569.808000] ACPI: PCI Interrupt Routing Table
>>>> [\_SB_.PCI0.AGP_._PRT]
>>>> [17179569.808000] ACPI: PCI Interrupt Routing Table
>>>> [\_SB_.PCI0.SLOT._PRT]
>>>> [17179569.812000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10
>>>> 11 12 14 15)
>>>> [17179569.812000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10
>>>> 11 12 14 15)
>>>> [17179569.812000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10
>>>> 11 12 14 15) *0, disabled.
>>>> [17179569.812000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10
>>>> *11 12 14 15)
>>>> [17179569.812000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10
>>>> *11 12 14 15)
>>>> [17179569.812000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10
>>>> 11 12 14 15) *0, disabled.
>>>> [17179569.812000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10
>>>> 11 12 14 15) *0, disabled.
>>>> [17179569.812000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10
>>>> 11 12 14 15)
>>>> [17179569.848000] Linux Plug and Play Support v0.97 (c) Adam Belay
>>>> [17179569.848000] pnp: PnP ACPI init
>>>> [17179569.904000] pnp: PnP ACPI: found 13 devices
>>>> [17179569.904000] PnPBIOS: Disabled by ACPI PNP
>>>> [17179569.904000] SCSI subsystem initialized
>>>> [17179569.904000] usbcore: registered new driver usbfs
>>>> [17179569.904000] usbcore: registered new driver hub
>>>> [17179569.904000] PCI: Using ACPI for IRQ routing
>>>> [17179569.904000] PCI: If a device doesn't work, try "pci=routeirq".
>>>> If it helps, post a report
>>>> [17179569.912000] PCI: Bridge: 0000:00:01.0
>>>> [17179569.912000]   IO window: disabled.
>>>> [17179569.912000]   MEM window: e0000000-e1ffffff
>>>> [17179569.912000]   PREFETCH window: f0000000-f8ffffff
>>>> [17179569.912000] PCI: Bridge: 0000:00:1e.0
>>>> [17179569.912000]   IO window: 2000-2fff
>>>> [17179569.912000]   MEM window: e2000000-e20fffff
>>>> [17179569.912000]   PREFETCH window: disabled.
>>>> [17179569.912000] PCI: Setting latency timer of device 0000:00:1e.0 to
>>>> 64
>>>> [17179569.912000] Simple Boot Flag at 0x72 set to 0x1
>>>> [17179569.912000] Machine check exception polling timer started.
>>>> [17179569.912000] audit: initializing netlink socket (disabled)
>>>> [17179569.912000] audit(1321191404.912:1): initialized
>>>> [17179569.912000] highmem bounce pool size: 64 pages
>>>> [17179569.912000] VFS: Disk quotas dquot_6.5.1
>>>> [17179569.912000] Dquot-cache hash table entries: 1024 (order 0, 4096
>>>> bytes)
>>>> [17179569.912000] squashfs: version 3.1 (2006/08/15) Phillip Lougher
>>>> [17179569.912000] NTFS driver 2.1.25 [Flags: R/W].
>>>> [17179569.912000] JFS: nTxBlock = 8192, nTxLock = 65536
>>>> [17179569.928000] Registering unionfs 1.1.2
>>>> [17179569.928000] Initializing Cryptographic API
>>>> [17179569.928000] io scheduler noop registered
>>>> [17179569.928000] io scheduler anticipatory registered
>>>> [17179569.928000] io scheduler deadline registered
>>>> [17179569.928000] io scheduler cfq registered
>>>> [17179569.928000] vesafb: framebuffer at 0xf0000000, mapped to
>>>> 0xf8d00000, using 3072k, total 131072k
>>>> [17179569.928000] vesafb: mode is 1024x768x16, linelength=2048, pages=1
>>>> [17179569.928000] vesafb: protected mode interface info at c000:e2d0
>>>> [17179569.928000] vesafb: scrolling: redraw
>>>> [17179569.928000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>>>> [17179569.928000] vesafb: Mode is VGA compatible
>>>> [17179570.024000] Console: switching to colour frame buffer device
>>>> 128x48
>>>> [17179570.024000] fb0: VESA VGA frame buffer device
>>>> [17179570.024000] isapnp: Scanning for PnP cards...
>>>> [17179570.336000] isapnp: No Plug&  Play device found
>>>> [17179570.364000] Non-volatile memory driver v1.2
>>>> [17179570.364000] PNP: No PS/2 controller found. Probing ports
>>>> directly.
>>>> [17179570.372000] serio: i8042 AUX port at 0x60,0x64 irq 12
>>>> [17179570.372000] serio: i8042 KBD port at 0x60,0x64 irq 1
>>>> [17179570.372000] Serial: 8250/16550 driver $Revision: 1.90 $ 48
>>>> ports, IRQ sharing enabled
>>>> [17179570.372000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>> [17179570.372000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>> [17179570.376000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>> [17179570.376000] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>> [17179570.380000] RAMDISK driver initialized: 16 RAM disks of 65536K
>>>> size 1024 blocksize
>>>> [17179570.380000] loop: loaded (max 8 devices)
>>>> [17179570.380000] Uniform Multi-Platform E-IDE driver Revision:
>>>> 7.00alpha2
>>>> [17179570.380000] ide: Assuming 33MHz system bus speed for PIO modes;
>>>> override with idebus=xx
>>>> [17179570.380000] ICH2: IDE controller at PCI slot 0000:00:1f.1
>>>> [17179570.380000] ICH2: chipset revision 18
>>>> [17179570.380000] ICH2: not 100% native mode: will probe irqs later
>>>> [17179570.380000]     ide0: BM-DMA at 0x1800-0x1807, BIOS settings:
>>>> hda:DMA, hdb:pio
>>>> [17179570.380000]     ide1: BM-DMA at 0x1808-0x180f, BIOS settings:
>>>> hdc:DMA, hdd:pio
>>>> [17179570.380000] Probing IDE interface ide0...
>>>> [17179570.668000] hda: ST340016A, ATA DISK drive
>>>> [17179571.340000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>>> [17179571.340000] Probing IDE interface ide1...
>>>> [17179572.076000] hdc: LITE-ON LTR-16102B, ATAPI CD/DVD-ROM drive
>>>> [17179572.412000] ide1 at 0x170-0x177,0x376 on irq 15
>>>> [17179572.412000] hda: max request size: 128KiB
>>>> [17179572.412000] hda: 78156288 sectors (40016 MB) w/2048KiB Cache,
>>>> CHS=65535/16/63, UDMA(100)
>>>> [17179572.412000] hda: cache flushes not supported
>>>> [17179572.412000]  hda: hda1 hda2<  hda5>
>>>> [17179572.444000] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache,
>>>> DMA
>>>> [17179572.444000] Uniform CD-ROM driver Revision: 3.20
>>>> [17179572.500000] ACPI: bus type scsi registered
>>>> [17179572.500000] libata version 1.20 loaded.
>>>> [17179572.500000] Driver 'sd' needs updating - please use bus_type
>>>> methods
>>>> [17179572.500000] ieee1394: Initialized config rom entry `ip1394'
>>>> [17179572.500000] ieee1394: raw1394: /dev/raw1394 device initialized
>>>> [17179572.500000] sbp2: $Rev: 1306 $ Ben Collins<bcollins@debian.org>
>>>> [17179572.500000] ieee1394: sbp2: Driver forced to serialize I/O
>>>> (serialize_io=1)
>>>> [17179572.500000] ieee1394: sbp2: Try serialize_io=0 for better
>>>> performance
>>>> [17179572.500000] usbmon: debugfs is not available
>>>> [17179572.500000] Initializing USB Mass Storage driver...
>>>> [17179572.500000] usbcore: registered new driver usb-storage
>>>> [17179572.500000] USB Mass Storage support registered.
>>>> [17179572.500000] mice: PS/2 mouse device common for all mice
>>>> [17179572.500000] NET: Registered protocol family 2
>>>> [17179572.536000] IP route cache hash table entries: 65536 (order: 6,
>>>> 262144 bytes)
>>>> [17179572.536000] TCP established hash table entries: 262144 (order:
>>>> 8, 1048576 bytes)
>>>> [17179572.540000] TCP bind hash table entries: 65536 (order: 6, 262144
>>>> bytes)
>>>> [17179572.540000] TCP: Hash tables configured (established 262144 bind
>>>> 65536)
>>>> [17179572.540000] TCP reno registered
>>>> [17179572.540000] ip_tables: (C) 2000-2002 Netfilter core team
>>>> [17179572.544000] input: AT Translated Set 2 keyboard as
>>>> /class/input/input0
>>>> [17179572.580000] TCP bic registered
>>>> [17179572.580000] NET: Registered protocol family 1
>>>> [17179572.580000] NET: Registered protocol family 8
>>>> [17179572.580000] NET: Registered protocol family 20
>>>> [17179572.580000] Using IPI Shortcut mode
>>>> [17179572.580000] ACPI wakeup devices:
>>>> [17179572.580000] SLOT COMA COMB USB1 USB2
>>>> [17179572.580000] ACPI: (supports S0 S1 S3 S4 S5)
>>>> [17179572.580000] RAMDISK: Compressed image found at block 0
>>>> [17179572.772000] EXT2-fs warning: maximal mount count reached,
>>>> running e2fsck is recommended
>>>> [17179572.776000] VFS: Mounted root (ext2 filesystem).
>>>> [17179582.824000] Unable to identify CD-ROM format.
>>>> [17179582.824000] VFS: Can't find an ext2 filesystem on dev hda.
>>>> [17179582.828000] VFS: Can't find ext3 filesystem on dev hda.
>>>> [17179582.828000] ReiserFS: hda: warning: sh-2021:
>>>> reiserfs_fill_super: can not find reiserfs on hda
>>>> [17179582.832000] FAT: invalid media value (0xb9)
>>>> [17179582.832000] VFS: Can't find a valid FAT filesystem on dev hda.
>>>> [17179582.832000] NTFS-fs warning (device hda): is_boot_sector_ntfs():
>>>> Invalid boot sector checksum.
>>>> [17179582.832000] NTFS-fs error (device hda): read_ntfs_boot_sector():
>>>> Primary boot sector is invalid.
>>>> [17179582.832000] NTFS-fs error (device hda): read_ntfs_boot_sector():
>>>> Mount option errors=recover not used. Aborting without trying to
>>>> recover.
>>>> [17179582.832000] NTFS-fs error (device hda): ntfs_fill_super(): Not
>>>> an NTFS volume.
>>>> [17179582.896000] ISO 9660 Extensions: Microsoft Joliet Level 3
>>>> [17179582.908000] ISO 9660 Extensions: RRIP_1991A
>>>> [17179591.188000] Freeing unused kernel memory: 192k freed
>>>> [17179602.684000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>> [17179602.708000] shpchp: Standard Hot Plug PCI Controller Driver
>>>> version:
>>>> 0.4
>>>> [17179603.148000] Linux agpgart interface v0.101 (c) Dave Jones
>>>> [17179603.172000] agpgart: Detected an Intel i845 Chipset.
>>>> [17179603.276000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
>>>> [17179603.276000] e100: Copyright(c) 1999-2005 Intel Corporation
>>>> [17179603.296000] agpgart: AGP aperture is 128M @ 0xe8000000
>>>> [17179603.296000] ACPI: PCI Interrupt 0000:02:08.0[A] ->  GSI 20
>>>> (level, low) ->  IRQ 16
>>>> [17179603.320000] e100: eth0: e100_probe: addr 0xe2000000, irq 16, MAC
>>>> addr 00:09:6B:78:AB:F0
>>>> [17179603.340000] USB Universal Host Controller Interface driver v2.3
>>>> [17179603.340000] ACPI: PCI Interrupt 0000:00:1f.2[D] ->  GSI 19
>>>> (level, low) ->  IRQ 17
>>>> [17179603.340000] PCI: Setting latency timer of device 0000:00:1f.2 to
>>>> 64
>>>> [17179603.340000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
>>>> [17179603.340000] uhci_hcd 0000:00:1f.2: new USB bus registered,
>>>> assigned bus number 1
>>>> [17179603.340000] uhci_hcd 0000:00:1f.2: irq 17, io base 0x00001820
>>>> [17179603.340000] hub 1-0:1.0: USB hub found
>>>> [17179603.340000] hub 1-0:1.0: 2 ports detected
>>>> [17179603.444000] ACPI: PCI Interrupt 0000:00:1f.4[C] ->  GSI 23
>>>> (level, low) ->  IRQ 18
>>>> [17179603.444000] PCI: Setting latency timer of device 0000:00:1f.4 to
>>>> 64
>>>> [17179603.444000] uhci_hcd 0000:00:1f.4: UHCI Host Controller
>>>> [17179603.444000] uhci_hcd 0000:00:1f.4: new USB bus registered,
>>>> assigned bus number 2
>>>> [17179603.444000] uhci_hcd 0000:00:1f.4: irq 18, io base 0x00001840
>>>> [17179603.444000] hub 2-0:1.0: USB hub found
>>>> [17179603.444000] hub 2-0:1.0: 2 ports detected
>>>> [17179603.456000] Real Time Clock Driver v1.12
>>>> [17179603.472000] input: PC Speaker as /class/input/input1
>>>> [17179603.684000] usb 1-2: new full speed USB device using uhci_hcd
>>>> and address 2
>>>> [17179603.828000] scsi0 : SCSI emulation for USB Mass Storage devices
>>>> [17179603.828000] usb-storage: device found at 2
>>>> [17179603.828000] usb-storage: waiting for device to settle before
>>>> scanning
>>>> [17179603.876000] Floppy drive(s): fd0 is 1.44M
>>>> [17179603.988000] FDC 0 is a National Semiconductor PC87306
>>>> [17179604.068000] usb 2-1: new full speed USB device using uhci_hcd
>>>> and address 2
>>>> [17179604.144000] ACPI: PCI Interrupt 0000:00:1f.5[B] ->  GSI 17
>>>> (level, low) ->  IRQ 19
>>>> [17179604.144000] PCI: Setting latency timer of device 0000:00:1f.5 to
>>>> 64
>>>> [17179604.208000] hub 2-1:1.0: USB hub found
>>>> [17179604.208000] hub 2-1:1.0: 4 ports detected
>>>> [17179604.524000] usb 2-1.1: new low speed USB device using uhci_hcd
>>>> and address 3
>>>> [17179604.620000] parport: PnPBIOS parport detected.
>>>> [17179604.620000] parport0: PC-style at 0x378 (0x778), irq 7, dma 1
>>>> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>>>> [17179604.760000] intel8x0_measure_ac97_clock: measured 53508 usecs
>>>> [17179604.760000] intel8x0: clocking to 41149
>>>> [17179604.780000] lp0: using parport0 (interrupt-driven).
>>>> [17179604.868000] usb 2-1.2: new low speed USB device using uhci_hcd
>>>> and address 4
>>>> [17179605.868000] usbcore: registered new driver hiddev
>>>> [17179605.892000] input: Logitech Logitech USB Keyboard as
>>>> /class/input/input2
>>>> [17179605.892000] input: USB HID v1.10 Keyboard [Logitech Logitech USB
>>>> Keyboard] on usb-0000:00:1f.4-1.1
>>>> [17179605.912000] input: USB Optical Mouse as /class/input/input3
>>>> [17179605.916000] input: USB HID v1.11 Mouse [USB Optical Mouse] on
>>>> usb-0000:00:1f.4-1.2
>>>> [17179605.916000] usbcore: registered new driver usbhid
>>>> [17179605.916000] drivers/usb/input/hid-core.c: v2.6:USB HID core
>>>> driver
>>>> [17179607.296000] e100: eth0: e100_watchdog: link up, 100Mbps,
>>>> full-duplex
>>>> [17179607.548000] fuse init (API version 7.8)
>>>> [17179607.548000] fuse distribution version: 2.6.1
>>>> [17179607.944000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>>> [17179607.944000] md: bitmap version 4.39
>>>> [17179608.544000] NET: Registered protocol family 17
>>>> [17179608.784000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>>> dm-devel@redhat.com
>>>> [17179608.832000]   Vendor:           Model: USB Flash Memory  Rev:
>>>> 1.00
>>>> [17179608.832000]   Type:   Direct-Access                      ANSI
>>>> SCSI revision: 02
>>>> [17179608.836000] SCSI device sda: 3913664 512-byte hdwr sectors (2004
>>>> MB)
>>>> [17179608.840000] sda: Write Protect is off
>>>> [17179608.840000] sda: Mode Sense: 65 44 09 30
>>>> [17179608.840000] sda: assuming drive cache: write through
>>>> [17179608.856000] SCSI device sda: 3913664 512-byte hdwr sectors (2004
>>>> MB)
>>>> [17179608.856000] sda: Write Protect is off
>>>> [17179608.856000] sda: Mode Sense: 65 44 09 30
>>>> [17179608.856000] sda: assuming drive cache: write through
>>>> [17179608.856000]  sda: sda1
>>>> [17179608.864000] sd 0:0:0:0: Attached scsi removable disk sda
>>>> [17179608.864000] sd 0:0:0:0: Attached scsi generic sg0 type 0
>>>> [17179608.868000] usb-storage: device scan complete
>>>> [17179613.368000] ACPI: Processor [CPU0] (supports 8 throttling states)
>>>> [17179613.536000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock
>>>> Modulation available
>>>> [17179613.604000] powernow: This module only works with AMD K7 CPUs
>>>> [17179618.924000] ndiswrapper version 1.38 loaded (preempt=yes,smp=no)
>>>> [17179618.976000] usbcore: registered new driver ndiswrapper
>>>> [17179619.724000] Adding 1646620k swap on /dev/hda5.  Priority:1
>>>> extents:1 across:1646620k
>>>> [17179621.012000] ACPI: Power Button (FF) [PWRF]
>>>> [17179621.012000] ACPI: Power Button (CM) [PWRB]
>>>> [17179621.248000] ibm_acpi: ec object not found
>>>> [17179621.300000] pcc_acpi: loading...
>>>> [17179621.416000] ACPI: Thermal Zone [THM0] (36 C)
>>>> [17179635.144000] ppdev: user-space parallel port driver
>>>> [17179639.016000] powernow: This module only works with AMD K7 CPUs
>>>> root@1[hda1]#

>>>>>>      I have uubuntuu10 installed on my hard drive. I don't have the
>>>>>> cd
>>>>>> for
>>>>>>      uubuntuu 10. I do have the cd for mepis 6.5. How do I reinstall
>>>>>> the
>>>>>>      boot sector? How do I figure out if it is the boot sector and
>>>>>> not
>>>>>> a
>>>>>>      hard drive failure. If it is a haard drive failure could someone
>>>>>> mail
>>>>>>      me a uubuntuu cd? I have a few hard drives I can use.
>>>>>>      --
>>>>>>      :-)~MIKE~(-:
>>>>>>      ---------------------------------------------------
>>>>>>      PLUG-discuss mailing list -
>>>>>> PLUG-discuss@lists.plug.phoenix.az.us
>>>>>>      <mailto:PLUG-discuss@lists.plug.phoenix.az.us>
>>>>>>      To subscribe, unsubscribe, or to change your mail settings:
>>>>>>      http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss