If you know the remote IP you can use IPTables to block port 80 expect for that port or ports.
------------------------
Keith Smith
--- On Thu, 6/30/11, Brian Parma <
freecode@cox.net> wrote:
From: Brian Parma <
freecode@cox.net>
Subject: Re: How to access a server http port 80 with port forwarding behind a router but require a password
To:
plug-discuss@lists.plug.phoenix.az.us
Date: Thursday, June 30, 2011, 5:42 PM
If you only want to authenticate outside users, you could setup a VPN if
you are going to be accessing it from the same machine (like a laptop).
You could use temporary SSH tunneling also, which would give access only
to the machine you are SSHing from.
You might be able to setup a dual HTTP/HTTPS as Judd said and only
require authentication on the HTTPS, then just forward that port. I'm
not sure as I've never tried it.
On 06/30/2011 05:28 PM, Judd Pickell wrote:
> Before you get too excited, most home network providers don't allow
> riding port 80. You can always use a different port like 8081 to
> bypass. Standard Authentication is doable via .htaccess with apache,
> however you goal is to be secure so you will likely want to setup a
> HTTPS port with basic authentication in Apache that you will point to.
> Not the most perfect solution but it does do roughly what you are
> wanting.
>
> Sincerely,
> Judd Pickell
>
> On Thu, Jun 30, 2011 at 5:22 PM,<leegold@speedymail.org> wrote:
>> Hi,
>>
>> Using Ubuntu 10.04 LTS.
>>
>> I have an intranet server behind a NAT router. Very standard linksys
>> router home setup. The server has a static IP. I used port forwarding in
>> the router to use SSH and log into the server remotely - it works OK.
>>
>> I want no one outside my home network to access any webpages on the
>> server unless they're authenticated.. I know I could port forward like
>> with ssh but with http port 80 and then see webpages , but again this
>> would open it up to anyone with my cable modem's IP - wouldn't it?
>>
>> I need a secure way like SSH that requires a password before anyone
>> could access port 80 and http from the server from a remote network.
>>
>> How do I do this? And on the local network people can get served pages
>> normally as usual. Just remote would need authentication. Must be
>> commonly done(?)
>>
>> Thanks,
>>
>> Lee G.
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss 
(text/plain)