The drive boots after all but only as far as grub. I found out
earlier today that the grub menu comes up but it fails to find the
file systems for booting the actual system. It looks like I will have
to rebuild the grub configuration or something. So yes, you're right;
the drive should boot and the MBR does work; it's just the rest of it
that doesn't but that sounds more like a grub issue now rather than
booting from the USB drive. Somehow while preparing this disk with
the Arch Linux installer, I think grub's identification of drives may
have been off or something. I almost wrecked my windows internal disk
doing this some how but at least I salvaged that for now so I need to
walk on some egg shells while doing this I guess.
On Tue, Nov 30, 2010 at 05:34:31PM -0700, Lisa Kachold wrote:
> If the drive is bootable, it will boot.
>
> Check the bios to ensure you have allowed boot from bios, and use spare
> systems before rebuilding your drive.
>
> You should be able to fdisk -l /dev/sdN (or whatever it is) plugged in and
> verify the boot. You should be able to verify your MBR and GRUB settings
> also. You can always REPEAT setting up the MBR?
>
> If you can't boot it, it's not built.
>
> Rebuild with a better set of instructions!
>
> On Tue, Nov 30, 2010 at 9:57 AM, Stephen <cryptworks@gmail.com> wrote:
>
> > newer machines should be able to boot directly to USB hdd just fine...
> > just never have had a drive that really worked with that.
> >
> > On Tue, Nov 30, 2010 at 9:24 AM, Steve Holmes <steve@holmesgrown.com>
> > wrote:
> > > That's rather annoying when some drive manufacturer forces us to leave
> > > their junk on the drive when we wish to do otherwise with it.
> > > Actually, my drive came out of an old laptop and I stuck it inside a
> > > portable drive enclosure so I would think we should be able to boot
> > > with it. I used grub to make this disk bootable or at least attempt
> > > to do so.
> > >
> > > I might have to do a grub-install to the /dev/sda MBR but I hesitate
> > > to do so at the moment.
> > >
> > > On Tue, Nov 30, 2010 at 07:25:08AM -0700, Stephen wrote:
> > >> I have an external drive that has the same issue. in my case there is
> > >> a small "firmware" that resides on the USB-PATA bridge that has about
> > >> 3-400 MB of stuff on it and mounts as a CD. this definitely fouled all
> > >> my attempts at booting to the device.
> > >>
> > >> On Tue, Nov 30, 2010 at 3:23 AM, Steve Holmes <steve@holmesgrown.com>
> > wrote:
> > >> > I got a new machine which (of course) has Windows pre-installed and
> > >> > I'm not ready to dump it entirely just yet so in the meantime, I built
> > >> > out a complete Arch Linux 64-bit system on a portable USB external
> > >> > drive. I also used or tried to use grub to set it up to boot. During
> > >> > the original settup session, it appeared to do all this OK but I can't
> > >> > get the laptop to recognize or boot from this device. I did not
> > >> > modify the master boot record on my laptop; instead, I figured on
> > >> > using the boot menu on the laptop to choose the USB drive; this method
> > >> > works beautifully with an ISO image I burned to a small thumbdrive but
> > >> > I cannot do the same with my larger USB portable drive on which I
> > >> > installed Arch Linux. Do I have to do anything else to make this
> > >> > thing bootable?
> > >> > ---------------------------------------------------
> > >> > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > >> > To subscribe, unsubscribe, or to change your mail settings:
> > >> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > >> >
> > >>
> > >>
> > >>
> > >> --
> > >> A mouse trap, placed on top of your alarm clock, will prevent you from
> > >> rolling over and going back to sleep after you hit the snooze button.
> > >>
> > >> Stephen
> > >> ---------------------------------------------------
> > >> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > >> To subscribe, unsubscribe, or to change your mail settings:
> > >> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > > ---------------------------------------------------
> > > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > > To subscribe, unsubscribe, or to change your mail settings:
> > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > >
> >
> >
> >
> > --
> > A mouse trap, placed on top of your alarm clock, will prevent you from
> > rolling over and going back to sleep after you hit the snooze button.
> >
> > Stephen
> > ---------------------------------------------------
> > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > To subscribe, unsubscribe, or to change your mail settings:
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> >
>
>
>
> --
> Network Operations Center Engineer
> Atjeu Hosting
>
> (503) 754-4452
> (623) 688-3392
>
> http://www.it-clowns.com | http://www.obnosis.com
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss