Eric,
Maybe this is what KP was trying to say
grub
root (hd1,0)
setup(hd1)
quit
Because, when I boot the system now, hd1 is my Linux drive. So I have to
setup grub on my Linux drive while it is running. Then I switch the Linux
drive to the first ide channel, so it becomes the first mbr to be read, and
it has grub installed there. I believe the current configuration has the mbr
on the first ide drive (windows) point to the mbr on the second ide drive
(linux and grub). I have to break that chain so the mbr of the second ide
drive is now the boot mbr.
The alternative would be to switch drives now, boot with a rescue disk and
perform
grub
root (hd0,0)
setup (hd0)
quit
Does this make sense?
Mark
On Sun, Jan 24, 2010 at 7:18 PM, Eric Shubert <
ejs@shubes.net> wrote:
>
> Mark,
> I don't understand entirely the commands that kitepilot said to use either.
>
> Your menu.lst file looks correct.
>
> savedefault, along with the "default" setting listed earlier in
> menu.lst, controls which kernel is used as the default. savedefault
> means "use me to boot next time", so generally speaking, the computer
> boots whichever OS was running last. Providing the "default" setting
> corresponds to this behavior.
>
> makeactive and chainloader commands are used with windows partitions.
> makeactive makes the partition active (whatever that means, but windows
> seems to require it), and chainloader, which effectively passes control
> over to the windows loader program, not unlike what happens when the
> bios passes control to grub. At least that's what I would guess.
>
> If grub is not installed in the mbr of the 2nd drive, it needs to be. I
> think that might be what kp was trying to get to. In order to install
> grub on mbr of drive hda, issue the "grub" command at the cli. Then at
> the grub prompt, enter the part after the prompt:
> grub> root (hd0,0)
> grub> setup (hd0)
> grub> quit
>
> If your OS is the 2nd partition on the drive, then you'd specify:
> grub> root (hd0,1)
>
> If your drive is hdb, then you'd use hd1 in place of hd0.
>
> That drive would then run grub when it's booted.
>
> --
> -Eric 'shubes'
>
>
> Mark Phillips wrote:
> > This is what I have in menu.lst
> >
> > title Debian GNU/Linux, kernel 2.6.26-2-686
> > root (hd1,4)
> > kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/hdb5 ro
> > initrd /boot/initrd.img-2.6.26-2-686
> >
> > title Microsoft Windows XP Professional
> > root (hd0,0)
> > savedefault
> > makeactive
> > chainloader +1
> >
> > So, I change
> > title Debian GNU/Linux, kernel 2.6.26-2-686
> > root (hd1,4)
> > kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/hdb5 ro
> > initrd /boot/initrd.img-2.6.26-2-686
> >
> > to
> >
> > title Debian GNU/Linux, kernel 2.6.26-2-686
> > root (hd0,4) <-- change1 to 0 here
> > kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/hda5 ro <--- change
> > b to a here
> > initrd /boot/initrd.img-2.6.26-2-686
> >
> > and remove
> > title Microsoft Windows XP Professional
> > root (hd0,0)
> >
> > What about these bad boys.....
> > savedefault
> > makeactive
> > chainloader +1
> >
> > I still don't understand the grub commands that I was told to use.
> >
> > Mark
> >
> > On Sun, Jan 24, 2010 at 5:58 PM, Eric Shubert <ejs@shubes.net
> > <mailto:ejs@shubes.net>> wrote:
> >
> > "every reference to hd1,0 is converted to hd0,0"
> > You need to edit this manually. hd1 in grub corresponds to hdb in
> linux,
> > and hd0 in grub is hda in linux.
> >
> > Mark Phillips wrote:
> > > I understand the flow....shouldn't I tell grub somehow that the
> > new boot
> > > drive is hd0,0? In your steps below, is there perhaps, a typo?
> > >
> > > Thanks!
> > >
> > > Mark
> > >
> > > On Sun, Jan 24, 2010 at 3:58 PM, kitepilot@kitepilot.com
> > <mailto:kitepilot@kitepilot.com>
> > > <mailto:kitepilot@kitepilot.com <mailto:kitepilot@kitepilot.com>>
> > <kitepilot@kitepilot.com <mailto:kitepilot@kitepilot.com>
> > > <mailto:kitepilot@kitepilot.com
> > <mailto:kitepilot@kitepilot.com>>> wrote:
> > >
> > > >> 1. How do I change grub on the Linux drive (hdb) to say
> > "the ...
> > > If you are running GRUB 0.XX (GRUB 1.XX is different):
> > > Boot your Debian machine and as root run:
> > > grub
> > > root (hd1,0)
> > > root (hd1)
> > > It should answer that it found the stages, verify that there
> > are no
> > > errors.
> > > quit
> > >
> > >
> > > Then take a backup of /boot/grub/menu.lst and and make sure
> that
> > > everything
> > > is either using UUID(s) or labels or every reference to hd1,0
> is
> > > converted
> > > to hd0,0
> > >
> > > Verify your /etc/fstab likewise.
> > >
> > >
> > > > 2. Do I move the second drive to the first ide port, or
> > leave it
> > > as ...
> > > Shutdown, pull the cable from the windoze drive and plug it
> > to Linux
> > > drive.
> > > Turn on and pray... :)
> > > Free advice, you can't sue me ;-)
> > > YMMV
> > > ET
> > >
> > >
> > >
> > >
> > > Mark Phillips writes:
> > >
> > > > I have two ide drives in one machine - drive 1 is a
> > Windows drive
> > > and drive
> > > > 2 is a Linux drive. Using grub, I can boot into either
> > windows or
> > > debian. I
> > > > want to remove the windows drive and replace it with a
> larger,
> > > blank drive
> > > > for backup storage. I have a feeling if I just remove the
> > first
> > > drive and
> > > > put the new one there, the machine will not boot, since
> > the MBR
> > > is probably
> > > > on the first drive (it came with the machine, and I just
> added
> > > the second
> > > > drive for Linux). My questions:
> > > >
> > > > 1. How do I change grub on the Linux drive (hdb) to say
> "the
> > > windows drive
> > > > is dead, boot here instead, long live linux"?
> > > >
> > > > 2. Do I move the second drive to the first ide port, or
> > leave it
> > > as the
> > > > second ide drive and put the new drive in the fist ide
> port?
> > > >
> > > > Thanks!
> > > >
> > > > Mark
> > > ---------------------------------------------------
> > > PLUG-discuss mailing list -
> > PLUG-discuss@lists.plug.phoenix.az.us
> > <mailto:PLUG-discuss@lists.plug.phoenix.az.us>
> > > <mailto:PLUG-discuss@lists.plug.phoenix.az.us
> > <mailto:PLUG-discuss@lists.plug.phoenix.az.us>>
> > > To subscribe, unsubscribe, or to change your mail settings:
> > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > >
> > >
>
>
> --
> -Eric 'shubes'
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)