Re: USB Thumb Drive Issues?

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: Jason Spatafore
Date:  
To: Main PLUG discussion list
Subject: Re: USB Thumb Drive Issues?
Sometimes, you can simply wipe the drive then setup as normal.

dd if=/dev/zero of=<usb drive> bs=512k

It will wipe with zeroes until completed. Then your drive should be
clean. That will rule out whether there is a chip making it read-only or
the partitioning scheme.

I do this drive wipe every day on drives and it works pretty well. Those
"secure" drives are a different story as they have a firmware based 1MB
partition you cannot "delete" via traditional means.



On Thu, 2009-10-29 at 08:17 -0700, Lisa Kachold wrote:
>
>
> On Mon, Oct 19, 2009 at 3:16 PM, mike Enriquez <>
> wrote:
>         I have a 4GB PNY thumb drive that has issues? It has become
>         "Write
>         Protected". It is an Optima pro Attache. I searched the net
>         and nothing
>         that I have found has helped me out.
>         Has any one in the group had this happen to them and how did
>         you remove
>         the write protection.
>         I cannot see any special files on it except 2 of my own.
>         Any suggestions out there?
>         Thanks

>
>         Mike Enriquez

>
> Hi Mike!
>
> There are a load of Window$ type repair suggestions here (Since this
> is a known bug in Xp SP2):
> http://www.techspot.com/vb/all/windows/t-18654-USB-Flash-Drive-Write-protection.html
>
> Linux solutions are going to be basic drive management:
>
> plug in usb flash drive and mount (if you don't have automouter)
>
> dmesg to verify the device:
>
> # dmesg
> # mkdir /mnt/usbwork
> # mount /dev/sda1 /mnt/usbwork
> (it might whine that you didn't specify the type if so:)
> # mount -t vfat (or NFS) /dev/sda1 /mnt/usbwork
> # cd /mnt/usbwork
> Copy off your old files
> # cp -r * $HOME
> # umount /mnt/usbhome
> # fdisk /dev/sda
>
> Remove all the partitions using the "d" command.
> create new partitions using the "n" command (you only really need one
> big one)
> set the file type "W95 FAT32 (LBA)" (or ext3 if making a bootable
> Linux distro) "t" (types will display)
> if this is going to hold a distro set the bootable flag "a"
> check your work: "p"
> save "w"
>
> Lay on a file system (that matches your file type):
>
> mkfs.vfat -I -n USBDRIVE /dev/sda1
>
> Your drive should work now just fine!
>
> Reference: http://ubuntuforums.org/showthread.php?t=346737
> --
> Skype: (623)239-3392
> AT&T: (503)754-4452
> www.obnosis.com
>
>
>
>
>
>
>
>
>
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list -
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss


---------------------------------------------------
PLUG-discuss mailing list -
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss