Folks,
I've added two DCS-920 cameras to my setup. Zoneminder box is based
off the latest Bluecherry liveCD, ZM 1.24.0 on Xubuntu 8.10.
The 920 is a WiFi version of the 910 and I've found very little info on it.
I'm running the cameras at 640x480 low-grade JPEG. I can't get more
than .65 to .70fps off them UNLESS I have another browser window on
some system on the local net continuously query the camera's video
feed - in that case, Zoneminder's FPS goes to a more usable state just
under 3fps, which I can live with.
Before I grab a bell, book and candle next lemme show you how it's working now.
From a regular web browser window talking straight to the camera, I
can go to a camera's IP address such as:
http://192.168.0.54
...and login. From there I can access the latest image snapshot at:
http://192.168.0.54/image.jpg
OR the camera's continuous video feed at:
http://192.168.0.54/video.cgi
...and this line seems to work too:
http://192.168.0.54/video.cgi?
Getting the camera's video feed gives me a somewhat "choppy" view, as
it will delay refreshing every few seconds for a split second...but
when it's displaying video, it looks to be about 5 to 8 FPS.
(Note: I have static camera IP addresses, and the ZM central box is on
the same internal net.)
Great. So go over to Zoneminder and it'll work off of /image.jpg just
fine, but at low frame rates (under 1 frame per second) unless I have
a separate browser window pointing to the camera's /video.cgi feed -
then it quadruples to something usable.
I can't get zoneminder to see the /video.cgi or /video.cgi? feeds at
all - no picture.
ZM setup stuff:
I've been looking at this thread:
http://www.zoneminder.com/forums/viewtopic.php?t=12233&sid=f51f2ed70b9d332ce9dc9e4a8ce9ca4b
...for the 910 cameras and ZM 1.23 series. In ZM version 1.24 I see no
way to set anything in Options>Network related to "ZM_NETCAM_REGEXPS"
or similar. Am I missing something?
In the camera's setup window in ZM I'm doing "source type" as remote
of course, "remote protocol" as HTTP, "remote method" is "simple",
remote hostname is [username]@[cameraipaddress] (this is behind a
firewall so I'm not bothering with passwords), "remote host port" is
"80".
Under "remote host path" I've tried all of the following:
video.cgi
/video.cgi
video.cgi?
/video.cgi
Thanks!
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss