Re: need help troubleshooting software raid failures

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: Matt Graham
Date:  
To: Main PLUG discussion list
Subject: Re: need help troubleshooting software raid failures
From: Alex Dean <>
> 09:24:29 ata3.00: status: { Busy }
> 09:24:29 ata3.00: error: { ICRC UNC IDNF }
> 09:24:29 ata3: hard resetting link
> 09:24:35 ata3: SATA link up 1.5 Gbps
> 09:24:35 ata3.00: configured for UDMA/100
> Jul 14 09:24:35 end_request: I/O error, dev sda, sector 58604927


This would make me think that there might be something wrong with
/dev/sda somewhere.

> Jul 16 09:38:22 end_request: I/O error, dev sda, sector 58604927


How 'bout that? Same sector number as before. Time to replace
/dev/sda , or at the very least run an extensive badblocks on the
disk. The same bad sector reported 48 hours apart is probably not
a coincidence, regardless of how the SATA controller is working.
I wish I could be more help, but the onboard nVidia SATA controller
I have at home has Just Worked. And the one time I ran into softRAID
problems at a friend's house, it was a disk that was dying and had
similar symptoms, though the bad sector numbers didn't match exactly
the way they do in this report.

--
Matt G / Dances With Crows
The Crow202 Blog: http://crow202.org/wordpress/
There is no Darkness in Eternity/But only Light too dim for us to see


---------------------------------------------------
PLUG-discuss mailing list -
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss