Re: Installed Ubuntu 8.04

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: Clayton Stapleton
Date:  
To: Main PLUG discussion list
Subject: Re: Installed Ubuntu 8.04
Used Gparted to try and resize /dev/sdc7 with the following results:
GParted 0.3.3

Libparted 1.7.1

Move /dev/sdc7 to the left and shrink it from 225.62 GiB to 5.86 GiB  00:01    ( ERROR )

    
calibrate /dev/sdc7  00:01    ( SUCCES )

    
path: /dev/sdc7
start: 4867758
end: 478030139
size: 473162382 (225.62 GiB)
calculate new size and position of /dev/sdc7  00:00    ( SUCCES )

    
requested start: 4867695
requested end: 17157419
requested size: 12289725 (5.86 GiB)
new start: 4867758
new end: 17157419
new size: 12289662 (5.86 GiB)
check filesystem on /dev/sdc7 for errors and (if possible) fix them  00:00    ( ERROR )

    
e2fsck -f -y -v /dev/sdc7
    
/dev/sdc7 is mounted.
e2fsck 1.40.2 (12-Jul-2007)
e2fsck: Cannot continue, aborting.



========================================

Create Logical Partition #1 (linux-swap, 219.76 GiB) on /dev/sdc

========================================
I suspect that Gparted was trying to e2fsck /dev/sdc7 which is locked and not the new partition!

Clay

> -----Original Message-----
> From:
> Sent: Sun, 11 May 2008 18:58:00 -0700
> To:
> Subject: Re: Installed Ubuntu 8.04
>
> I had that same problem back in 1999 or 2000 I believe. I used LILO
> to get around it...
> Had something to do with the segment it was located on the disk, and
> the hardware having problems addressing past a certain part at boot.
> For some reason, hard reset and soft reset have different
> characteristics. & only on some hardware....
> One way to work around it is to create a real small partition for boot
> as (h|s)da1... like 25mb or 50mb. Try pulling everything down to 1 or
> 2gb for the second partition and use the final partition for swap
> space. If that works, you know the problem.
> Or just use LILO when Grub's not your thing :) (disclaimer: I've
> never used Ubuntu, so I'm not sure of the "only uses <x> application"
> setup for them.
>
> --Dan

___________________________________________________________
>> FREE 3D MARINE AQUARIUM SCREENSAVER - Watch dolphins, sharks & orcas on
>> your desktop!
>> Check it out at http://www.inbox.com/marineaquarium
>> ---------------------------------------------------
>> PLUG-discuss mailing list -
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
>
>
> --
> Thanks,
> Dan Lund
> ---------------------------------------------------
> PLUG-discuss mailing list -
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

---------------------------------------------------
PLUG-discuss mailing list -
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss