On 9/3/07, Vaughn Treude <
vltreude@deru.com> wrote:
> Hello everyone:
> Here's a question for the MythTV experts in the group.
>
> Here's the background - I had a Hauppage TV card (which I used for video
> capture) running fine under Mandrake 10. Then the system's motherboard
> died, taking the Hauppage card with it. I recreated the system on a new
> mobo, installing Mandrake 2005 (mainly because I had a set of those CD's
> laying around.) So I got everything reinstalled and working on that. I
> just needed a new TV card. I recently purchased a Hauppage PVR-150, and
> although the system detects its presence, the card won't work. I've
> downloaded IVTV drivers for my kernel (the old 0.49 versions for 2.6.11)
> and those load without error, but will not talk to the card.
>
> All of the "how to" instructions I've found so far say you should test
> by doing a "cat" from /dev/video0. The problem is that on my system
> this device doesn't exist. One of the "how to" documents said you could
> create the /dev/video* devices manually, which I tried, but they were
> gone after reboot. So I imagine that udev (if I understand its purpose
> correctly) isn't seeing the card. Do you think this might indicate that
> the Hauppage might be bad?
>
> Another bit of info: this is a dual-boot system, with Windows 98 on the
> other partition. I tested the previous TV card first under Windows, and
> it worked right away. But the drivers that came with the PVR-150 are
> for XP, so although Windows detected and identified the card correctly,
> the drivers wouldn't install. After some searching, I downloaded a
> driver that might _possibly_ be right for the PVR-150 (it was supposed
> to support all cards with its particular chipset), but they didn't work
> either. When I try to start WinTV 2000 it says it can't find some sort
> of filter device. That could mean the card's bad, I suppose, or it
> could just be the wrong driver.
>
> I'm thinking I may be missing some video components on Linux, since it
> doesn't create /dev/video* and I haven't tried a TV card before on this
> install. But it doesn't seem likely, as I've downloaded and installed
> the many, many video-related packages to get Xine working. But I'm
> still hopeful that I won't have to return this card. Any suggestions of
> video-type packages that I might have missed? (I suppose I could try
> upgrading to kernel 2.6.18 as the IVTV docs suggested, so I can get more
> recent drivers, but I think my problem is more fundamental than that.)
>
> Thanks,
> Vaughn
I'm not a MythTV expert, but I remembered reading something... ah,
here it is. On
http://mythtv.org/docs/mythtv-HOWTO-3.html#ss3.1
"NOTE: There have been reports (2006-12 timeframe) that Hauppauge is
putting the HVR-1600 inside of the PVR-150 box; if you're purchasing a
retail PVR-150, carefully examine the packaging - there should be some
indication that the hardware inside is actually a HVR-1600 and not a
PVR-150."
This is in the bullet point where the HVR-1600 is listed as Not
Working. Are you 100% sure you have a PVR-150? Just one data point to
check.
-A
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)