I have never heard of a hard drive causing this type of problem unless
the ide connector on the motherboard is bad. Usually these types of
problems are memory related but sounds more like a bad motherboard.
Michael Seidner
M5 Systems
602-288-8304
http://www.m5systems.net
-----Original Message-----
From:
plug-discuss-admin@lists.plug.phoenix.az.us
[
mailto:plug-discuss-admin@lists.plug.phoenix.az.us] On Behalf Of Bupkus
Sent: Sunday, January 02, 2005 10:20 AM
To:
plug-discuss@lists.plug.phoenix.az.us
Subject: Re: Motherboard recommendations?
Michael,
I wonder if you can help me with a tech support question.
I do support for a dozen computers kids use at a local childcare center
which means they have a mix of different, inexpensive and donated boxes.
I have one that is most annoying. The mobo is a Soyo build on the VIA
KT266A chipset. At first it didn't post an image, but after a reseating
of the video card it did.
Then it kept freezing or rebooting even when I was in the bios. I
concluded from this that it was the hardware. Before I had a chance to
test the memory I felt I should try disconnecting the hdd as it gave an
odd sound just before reboot. Now I'm in the bios and no freeze or
reboot. I'm thinking the Antec 300W Switch PS may be the culprit unless
a bad hdd can actually cause this problem. I lack your years of
experience so I'm posting this question to you.
This is an old system that has worked for the previous owned for years
and I suppose a hdd test is in order, if I can run it to completion.
The hdd is a Maxtor D740X-6L, first installed in this system when the
KT266A chipset was new.
Thanks,
Mark B.
Michael Seidner wrote:
> In my business, selling systems hardware and software to my customers
> for the past 20 years I have seen pretty much everything in the PC
> industry. I have built systems using Intel, Gigabyte, ASUS, MSI, ECS,
> Tyan, etc. etc. I have had problems with all of them. Someone said in
> this post they prefer Intel because of their reliability, drivers,
etc.
> I have seen many issues with those boards and with the higher cost and
> lack of appreciable performance gain they are not the best bang for
the
> buck either. Unless you are working with Windows 95/98 drivers should
> not be an issue. The best motherboard I had ever come across in my
> experience was Micronics but they are long gone. I know that those
Fry's
> ECS boards are junk and any motherboard which has a fan for the
chipset
> should be avoided as well. I have seen very good reliability from ASUS
> and MSI. Gigabyte has given me the most problems over the years. Tyan
> was crap in the beginning but has improved greatly. We have a customer
> with a dual Athlon Tyan board and it works great. It's all about
> experience and trying out different things. Not all hardware works
with
> all hardware and software.
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)