Hello All,
I sent this yesterday but it never showed up, so I'll try again.
Hello all,
I hope someone can help with this problem. I am trying to enable the
PCM (optical) output of my ABIT-AN7 motherboard on Mandrake 10.1
Official. The sound seems to be working fine, but I have the Optical
out plugged into my DTS/DD receiver and would like to be able to watch
DVD's with full Surround sound. The problem is I have no idea how to
enable the PCM output. I am using ALSA and Xine works fine through the
analog output.
[root@farwest root]# lsmod
Module Size Used by
nfsd 189408 8
exportfs 4736 1 nfsd
lockd 58344 2 nfsd
sunrpc 127652 2 nfsd,lockd
md5 3584 1
ipv6 230916 16
snd-seq-oss 31232 0
snd-seq-midi-event 6080 1 snd-seq-oss
snd-seq 47440 4 snd-seq-oss,snd-seq-midi-event
snd-pcm-oss 49480 0
snd-mixer-oss 17376 2 snd-pcm-oss
snd-intel8x0 30124 2
snd-ac97-codec 69392 1 snd-intel8x0
snd-pcm 81800 3 snd-pcm-oss,snd-intel8x0
snd-timer 20356 2 snd-seq,snd-pcm
snd-page-alloc 7400 2 snd-intel8x0,snd-pcm
gameport 3328 1 snd-intel8x0
snd-mpu401-uart 5856 1 snd-intel8x0
snd-rawmidi 19300 1 snd-mpu401-uart
snd-seq-device 6344 3 snd-seq-oss,snd-seq,snd-rawmidi
snd 45988 12
snd-seq-oss,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-intel8x0,snd-ac97-codec,snd-pcm,snd-timer,snd-mpu401-uart,snd-rawmidi,snd-seq-device
soundcore 7008 2 snd
af_packet 16072 0
floppy 55088 0
eth1394 17000 0
forcedeth 14400 0
ide-cd 37280 0
cdrom 37724 1 ide-cd
ohci1394 30788 0
ieee1394 292056 2 eth1394,ohci1394
loop 12520 0
supermount 34804 2
xfs 567160 1
sd_mod 19232 3
nvidia 3462972 12
nvidia-agp 5788 1
agpgart 27752 2 nvidia-agp
sata_sil 5380 2
libata 38308 1 sata_sil
scsi_mod 104044 2 sd_mod,libata
tsdev 5824 0
evdev 7648 0
usbmouse 4256 0
usbhid 41088 0
ehci-hcd 26244 0
ohci-hcd 18468 0
usbcore 103172 6 usbmouse,usbhid,ehci-hcd,ohci-hcd
reiserfs 258324 8
----------------
[root@farwest root]# lspci
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
Controller (rev a1)
00:05.0 Multimedia audio controller: nVidia Corporation nForce
MultiMedia audio [Via VT82C686B] (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire
(IEEE 1394) Controller (rev a3)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD
Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller
(rev 02)
02:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX
5900] (rev a1)
----------------
If anyone can shed some light on this question I would be very grateful.
Thanks for any assistance.
--
Donn
"Sarcasm is the safe alternative to expressing anger."
--Richard North Patterson
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)