Hmm, these Compaqs can sure be troublesome. Are you saying X doesn't run?
It ran find on the Presario I installed 9.1 on. It's a pain, but maybe you
need to experiment with the switches; you may not need them all. I don't
even know what "nomce" means, for example.
Good luck,
Vaughn
On Wednesday 14 May 2003 20:06, you wrote:
> Thanks Vaughn,
> That seems to have done the trick (althought alt0 didn't work, so I used
> linux)
> -when I used the defaults, the install recognized and powered up my
> wireless lan pcmcia card, but with the switches that didn't happen.
> -now I can't get a gui to come up :-(
> ----- Original Message -----
> From: "Vaughn Treude" <vltreude@deru.com>
> To: <plug-discuss@lists.plug.phoenix.az.us>
> Sent: Monday, May 12, 2003 6:29 AM
> Subject: Re: linux on compaq LTE 5100
>
> > Dan,
> > I struggled with a Compaq for a while, and eventually got Mandrake 9.1
> > installed. I don't know if your problem is the same - in my case, it was
> > because the IDE chipset wasn't compatible with the older versions of the
>
> 2.4
>
> > kernel. Even though they'd supposedly fixed these problems in 2.4.20 or
>
> 21,
>
> > I still couldn't install, until I found the correct switches. At the
>
> first
>
> > install screen it says to press a key for more options - maybe it's
> > Enter,
>
> I
>
> > don't recall - and then you can enter startup options on the command
> > line. For me, the following options worked: alt0 nousb nomce noauto
> > Normally, the first parameter would be "linux", because that's what
> > you're installing, but in this case alt0 must be some sort of alias. I
> > got this info from the following web site:
> > http://www.geocities.com/thaweesakb/linux.html
> > Your mileage may vary. If this doesn't work, I recall seeing other sites
> > where other tinkerers had found other switch options; but none of those
> > worked for me. Just do a google search on "Compaq LTE 5100" and "Linux
> > install" or something similar.
> >
> > Vaughn Treude
> > Nakota Software, Inc.
> >
> > For the Mandrake 9.1 install, the switches were: 'alt0 nousb nomce
>
> noauto'.
>
> > On Sunday 11 May 2003 16:46, you wrote:
> > > Hi,
> > > I have a compaq LTE 5100 (P90 with 72 MB ram).
> > > I've tried installing mandrake 9.1 and the install gets stuck at
>
> "looking
>
> > > for available packages" I can see the that the cdrom drive is being
> > > accessed, but apparently no packages are being found.
> > >
> > > I've also tried installing mandrake 7.2, and get stuck at the same
>
> place.
>
> > > i'm new to linux... (I wanted to install it on this laptop because it
> > > wasn't really being used for anything). So you'll have to explain
>
> things v
>
> > > e r y s l o w l y :-)
> > >
> > > Any ideas would be appreciated.
> > >
> > > ... Dan
> >
> > ----------------------------------------
> > Content-Type: text/html; charset="iso-8859-1"; name="Attachment: 1"
> > Content-Transfer-Encoding: quoted-printable
> > Content-Description:
> > ----------------------------------------
> > ---------------------------------------------------
> > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > To subscribe, unsubscribe, or to change you mail settings:
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)