On Wed, 2003-02-05 at 14:32, Jenny Charlene wrote:
> On Wednesday 05 February 2003 08:59 am, Ted Gould wrote:
> Thanks Ted, I'm with you about half the way,
>
> > 1) To set up modules to autoload on boot you need to put them in your
> > /etc/modules.conf. This will tell your system what to load on boot up.
>
> Ok, not a problem, but what do I type in? I need to have these modules loaded:
> uhci
> usb-storage
look at the man pages for modules.conf (or google for the man pages)
in my system, since I don't have usb stuff compiled in statically, here
are the relevant lines in /etc/modules.conf:
alias usb-interface usb-uhci
The hotplugging scripts (again, google for them and see what docs you
can find) _should_ take care of loading up usb-storage AND scsi_mod
At that point, you be able to fdisk or mount /dev/sda (or sdb, depending
on if you already have scsi or scsi emulated devices on your system).
I use CompactFlash cards through a usb-dongle on a daily basis. Word of
the wise: Make sure your kernel is fairly current! I have troubles with
USB and CF cards on anything less than a 2.4.19...though it does work
well on a Mandrake 8.2 2.4.18 kernel.
Somehow, with a stock 2.4.19, i have little trouble, though my co-worker
still has a heap of trouble on his machine.
Hopefully a stable 2.6.x kernel will have better USB support
>
> > 2) To set up modules to autoload when you plug in a device you need to
> > look in /etc/hotplug.
>
> Look for what? I don't know the format of what to type in/look for.
>
> > Now, depending on the device you are trying to plug in, I'm guessing
> > that no one has entered the USB device id's into the tree that RedHat is
> > using. You can find a complete listing for Linux at
> > http://linux-usb.org but that doesn't mean that it's in RedHat. (There
> > was a better site somewhere, but I can't find it, if someone knows the
> > URL please post it).
>
> No, my flashcard reads is recognized by the system, when I've loaded the
> modules manually. I think the biggest problem is that module "uhci" (which
> runs the host controller) dosen't get loaded on start up, so the kernel
> doens't even know that it has usb, so not recognizing the cardreader doen't
> really surprise me.
>
> > How do you find said ids? The best way is to look in /var/log/messages
> > as you plug in the device. You'll see a lot of test scroll by and that
> > will have your devices in it. You'll probably also see a message that
> > it wasn't recognized.
>
> Nope, here's the log, after I've manually loaded the mods:
> l: Initializing USB Mass Storage driver...
> : usb.c: registered new driver usb-storage
> : scsi1 : SCSI emulation for USB Mass Storage devices
> : Vendor: SIIG Model: CompactFlash Car Rev: 0113
> : Type: Direct-Access ANSI SCSI revision: 02
> : Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
> : SCSI device sda: 250881 512-byte hdwr sectors (128 MB)
> : sda: test WP failed, assume Write Enabled
> : sda: sda1
> : USB Mass Storage support registered.
>
> Thanks!
> --
> Take care,
> Jenny
>
> Random quote of the day:
> Horner's Five Thumb Postulate:
> Experience varies directly with equipment ruined.
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)