Hi Keith,
It is possible that the Actiontec reverted back to its factory default
settings after the firmware upgrade. By default, its web server has the IP
address 192.168.0.1. The Actiontec's DHCP server is also active and serving
192.168.0.0/24 IP addresses, so set up your workstation to obtain its IP
address automatically and you should be able to browse to the following URL
and reconfigure:
http://192.168.0.1
Hope this helps.
----- Original Message -----
From: "klsmith" <
ksmith@dakotacom.net>
To: <
plug-discuss@lists.plug.phoenix.az.us>
Sent: Wednesday, January 01, 2003 8:54 PM
Subject: Re: Qwest/Actiontec/Cisco/Server issues
> > Date: Wed, 01 Jan 2003 19:51:11 -0700
> > From: Don Calfa <tvat3000@netscape.net>
> > To: plug-discuss@lists.plug.phoenix.az.us
> > Subject: Re: PLUG-discuss digest, Vol 1 #3149 - 13 msgs
> > Reply-To: plug-discuss@lists.plug.phoenix.az.us
> >
> > I changed the default 192.168.0.1 of the gateway to 10.0.0.1. easier to
> > type and subnet for experiments.
> >
> > I have:
> > No services blocked
> > No website blocking
> > L2TP is off
> > Remote management is off. As long as you're within your internal
> > network, the external IP will work. If this is on, you can acces this
> > from the outside.
>
> Okay I'm the same.
>
>
> > Port fowarding - I have a slew of addresses going to multiple servers.
> > Listed as 80-80 to 10.0.0.20, 20-23 to 10.0.0.10, 8080-8080 to
>
>
>
> > 10.0.0.30, etc...
> > DMZ is off right now but it does work when I used it for ILS
temporarily.
>
>
> > MAC address is default
> > NAT is on
> > Static routes:
> > 10.0.0.10/255.255.255.0,10.0.0.1
> > 10.0.0.20/255.255.255.0,10,0,0,1
> > etc...
>
> I'm not sure about this one.
>
> >
> >
> > I have a static IP but I obtain it through PPPoA and I'm not using the
> > wireless feature since I plan on returning it back to Qwest after the
> > contract.
> >
> >
> > Hope this helps.
> >
>
> Seems I "was" configured properly.
>
> I went to the actiontec site and found what they called the QWest firmware
> 1.60.0.49. Thinking there might be a bug. I did the upgrade - which was
> actually moving backwords given the release date. All went well according
> to the feedback.
>
> Now I can not access the actiontec. It appears dead.
>
> Anyone have an idea? I know with the Cisco one could get into debug mode
> and fix the malconfigured image, however this was through serial.
>
> Thanks in advance for any help.
>
> Keith
>
> >
> > klsmith wrote:
> >
> > >Hello Don,
> > >
> > >Thank you for your help.
> > >
> > >
> > >
> > >>Date: Wed, 01 Jan 2003 18:09:23 -0700
> > >>From: Don Calfa <tvat3000@netscape.net>
> > >>To: plug-discuss@lists.plug.phoenix.az.us
> > >>Subject: Re: Qwest/Actiontec/Cisco/Server issues
> > >>Reply-To: plug-discuss@lists.plug.phoenix.az.us
> > >>
> > >>I have the ActionTec 1520 and don' t have a problem with it. I'm
> > >>actually using 2 servers accessible behind it.
> > >>
> > >>
> > >
> > >
> > >
> > >>You have to set up NAT,
> > >>
> > >>
> > >
> > >My static IP is 66.192.159.4 which I entered undet the basic setup.
> > >
> > >NAT is "on".
> > >
> > >Under advanced setup > Port Forwarding I tried:
> > >
> > >Port 80-80 both 10.0.0.100 (my server's address) I've changed the
gateway
> to
> > >10.0.0.1.
> > >
> > >I did a save restart.
> > >
> > >when I try to browse to my url of http://www.akscomputers.com/ I get
the
> > >Actiontec setup web page.
> > >
> > >What am I missing?
> > >
> > >
> > >
> > >>Static addresses, and the ports you want forwarded.
> > >>
> > >>My firmware is 1.60.0.49
> > >>
> > >>
> > >>
> > >I'm running 1.60.10.0.30b-R1520SU
> > >
> > >It was 1.60.10.0.30-R1520SU when it arrived Monday.
> > >
> > ><SNIP>
> > >
> > >
> > >
> > >>>Qwest sent an Actiontec 1520 as a replacement.
> > >>>
> > >>>History:
> > >>>
> > >>>1) Tried to get the Actiontec to do port forwarding - does not appear
> to
> > >>>work.
> > >>>2) Searched internet and found dozens of posts about this problem.
> > >>>Suggested solution was firmware upgrade.
> > >>>3) Firmware upgraded.
> > >>>4) Still unable to get port forwarding to work.
> > >>>
> > >>>
> > >
> > ><SNIP>
> > >
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)