I can get out to the net from the boxes behind the D Link, no problems
there. I can see the boxes that are connected to the D Link either via
LAN or wireless.
With W2K on both the laptops (on the D Link), I can browse via MS
network thingy. But I cannot see the main Linux box that all this is
going thru.
I need to check for SW upgrades to the D Link too, maybe there's
something there.
On Mon, 2002-12-30 at 11:28, Darrell Shandrow wrote:
> Hi Pete,
>
> OK, hmmm, wait...
> Did you say that the boxes behind the 192.168.0.0/24 network *are* or *are
> not* able to access the Internet connection???
>
> ----- Original Message -----
> From: "mazdaracer" <mazdaracer@earthlink.net>
> To: <plug-discuss@lists.plug.phoenix.az.us>
> Sent: Monday, December 30, 2002 11:29 AM
> Subject: Re: unreachable host
>
>
> > Interestingly, I cannot. I thought I should be able to open a browser
> > and log into the D Link, but not from the main .10 box. From the laptop
> > however I can since it's off of the D Link builtin hub.
> >
> > I may just put a hub on eth1 and plug the dlink into it so I can put the
> > other laptop on the hub and at least talk to the main box. But that is a
> > temp measure at best. This isn't anything critical, it's a home network.
> >
> > Thanks for putting your brain power behind it!!
> >
> > pete
> >
> > On Mon, 2002-12-30 at 08:23, Darrell Shandrow wrote:
> > > Hi Pete,
> > >
> > > Hmmm, interesting. Seems you've got a good stumper for me here; seems
> as
> > > though things should all work fine given its configuration. One thing
> to
> > > check: are all subnet masks 255.255.255.0 on the 192.168.0.0 network
> > > addresses? Also, from the Linux box on 192.168.0.10, can you ping the
> Dlink
> > > and both computers behind it?
> > >
> > > Thanks.
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: "mazdaracer" <mazdaracer@earthlink.net>
> > > To: <plug-discuss@lists.plug.phoenix.az.us>
> > > Sent: Sunday, December 29, 2002 7:08 PM
> > > Subject: Re: unreachable host
> > >
> > >
> > > > Indeed I still could use help!
> > > >
> > > > Going from the external side inward:
> > > > DSL router connected to 3 boxes: 2 XP and my Linux
> > > > My Linux has 2 ethernet cards, eth0 and eth1.
> > > > Eth0 is the external and has a fixed IP;
> > > > eth1 is internal and is 192.168.0.10;
> > > > eth1 connects to the d link router, a wireless access point with 4
> port
> > > > hub;
> > > > eth1 has port forwarding enabled;
> > > > the d link is ip 192.168.0.2 and I have the configuration as if the
> > > > assigned ip address is 192.168.0.3 from the isp.
> > > > gateway is assigned as .10, my eth1 address.
> > > > the d link is also acting as a dhcp server for the wifi and lan
> devices
> > > > connected thru its hub. Therefor the 2 laptops can connect to the
> > > > internet, and they can see each other, but I cannot see the linux box
> > > > via ping, ftp or as web server.
> > > >
> > > > Not concerned with the XP boxes. Just trying to get the laptops that
> are
> > > > connected to the D Link to access my main linux box, 192.168.0.10.
> > > >
> > > > Everything off eth1 is 192.168.0.x.
> > > >
> > > > I tried setting up the D Link with the virtual device settings per the
> > > > help. That is, a virtual ftp server as well as web giving the .10
> > > > address of my main linux box. But that doesn't seem to work.
> > > >
> > > > I have suspicions that it's the linux side that is having an issue,
> > > > since I can do a status of the system from the linux admin web page
> and
> > > > it shows it sees the windows 2000 box and gives its name, but it can't
> > > > get the name off the linux laptop! Yet when I reboot laptop2 (dual
> boot
> > > > box from work) it sees the name. Still can't ping the 0.10 box however
> > > > from either laptop.
> > > >
> > > > I figure it's the setup in the D Link more than anything else.
> > > > D Link DI-614+ is the device.
> > > >
> > > > Thanks for taking a shot at it!
> > > >
> > > >
> > > > On Sun, 2002-12-29 at 17:28, Darrell Shandrow wrote:
> > > > > Hi Pete,
> > > > >
> > > > > Though this looks like it should be a relatively simple network from
> the
> > > > > available description, I can't totally understand how the devices
> have
> > > been
> > > > > physically connected; I can't read the diagram relationships between
> the
> > > > > devices because I am blind. I can certainly assist you, but a text
> > > > > description of what is going on would certainly help.
> > > > >
> > > > > For instance, how are those two XP machines connected to the
> network?
> > > Via
> > > > > that Dlink hub/router combo, or some other way via that first RH 7.3
> > > box?
> > > > > Please feel free to continue this if you're still in need of an
> assist.
> > > > >
> > > > > Thanks.
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "mazdaracer" <mazdaracer@earthlink.net>
> > > > > To: "plug-discuss@lists.PLUG.phoenix.az.us"
> > > > > <plug-discuss@lists.plug.phoenix.az.us>
> > > > > Sent: Sunday, December 29, 2002 5:13 PM
> > > > > Subject: unreachable host
> > > > >
> > > > >
> > > > > > Perhaps a bit unusual for what may be the norm, but this is what
> I've
> > > > > > got setup:
> > > > > >
> > > > > > + XP2 (public)
> > > > > > |
> > > > > > + XP1 (public)
> > > > > > |
> > > > > > DSL Router -+ [eth0 ]
> > > > > > [ Redhat 7.3 ]
> > > > > > [eth1 (192.168.0.10)]
> > > > > > [___________________]
> > > > > > |
> > > > > > |
> > > > > > [ dLink WiFi 614+ Router/Hub ]
> > > > > > [ LAN: 192.168.0.2 ]
> > > > > > [ WAN: 192.168.0.3 ]
> > > > > > [ Gateway: 192.168..10 ]
> > > > > > [___DHCP Svr 192.168.0.100 to 120_________]
> > > > > > | |
> > > > > > Lan WiFi
> > > > > > | |
> > > > > > Laptop2 Laptop1
> > > > > > (RH7.3) (W2k)
> > > > > > .102 .100
> > > > > >
> > > > > >
> > > > > > I can ping 102 > 100 and vice versa, but not .10
> > > > > > I tried setting the ISP assigned addr to all 0, but then I can't
> get
> > > > > > out, so I changed it to .3 and the dlink itself is .2. Now I can
> get
> > > out
> > > > > > to the net via .10.
> > > > > > Of course I can ping .2 from the laptops to get into the setup
> program
> > > > > > for the dlink.
> > > > > >
> > > > > > Basically I'm not sure how to set up the router properly so I can
> > > access
> > > > > > my main box (.10) for ftp etc.
> > > > > >
> > > > > > pete
> > > > > >
> > > > > >
> > > > > >
> > > > > > ---------------------------------------------------
> > > > > > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > > > > > To subscribe, unsubscribe, or to change you mail settings:
> > > > > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > > > >
> > > > > ---------------------------------------------------
> > > > > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > > > > To subscribe, unsubscribe, or to change you mail settings:
> > > > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > > >
> > > >
> > > > ---------------------------------------------------
> > > > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > > > To subscribe, unsubscribe, or to change you mail settings:
> > > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > >
> > > ---------------------------------------------------
> > > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > > To subscribe, unsubscribe, or to change you mail settings:
> > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> >
> >
> > ---------------------------------------------------
> > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > To subscribe, unsubscribe, or to change you mail settings:
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)