I've got a olympus c-4000z. check out this link:
http://www.schubart.net/c3040zoom/linux-usb.html
mount -t vfat /dev/sda1 /mnt/camera
slut:/# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: OLYMPUS Model: C4100Z/C4000Z Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 0
slut:/# lsmod
vfat 9532 1 (autoclean)
fat 29752 0 (autoclean) [vfat]
usb-storage 91088 1
scsi_mod 51520 2 [sd_mod usb-storage]
On Thursday 17 October 2002 19:22, Mike Starke wrote:
> I mount my camera (compact flash) as '-t msdos'. Have you tried
> that?
>
>
> On Thu, Oct 17, 2002 at 07:12:19PM -0700, Lynn David Newton wrote:
>
> Re: mounting a Sony Mavica CD1000 as a USB device:
>
> Bill> Check your `dmesg` output and see what the
> Bill> kernel reports when it detects the device.
> Bill> There may be helpful information there.
>
> Hmmm, okay here's what I see:
>
> $ dmesg | grep -i usb
> hub.c: USB new device connect on bus1/2, assigned device number 2
> usb.c: USB device 2 (vend/prod 0x54c/0x24) is not claimed by any active
> driver. Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> scsi1 : SCSI emulation for USB Mass Storage devices
> usb-uhci.c: interrupt, status 3, frame# 710
> usb-uhci.c: interrupt, status 3, frame# 715
> WARNING: USB Mass Storage data integrity not assured
> USB Mass Storage device found at 2
> USB Mass Storage support registered.
> usb.c: USB disconnect on device 2
> hub.c: USB new device connect on bus1/2, assigned device number 3
> usb-uhci.c: ENXIO 80000380, flags 0, urb c3b81be0, burb c3b81760
> usb.c: error getting string descriptor 0 (error=-6)
> usb-uhci.c: ENXIO 80000380, flags 0, urb c3b81be0, burb c3b81760
> usb.c: error getting string descriptor 0 (error=-6)
> usb-uhci.c: ENXIO 80000380, flags 0, urb c3b81be0, burb c3b81760
> usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 4 ret -6
> WARNING: USB Mass Storage data integrity not assured
> USB Mass Storage device found at 3
> usb.c: USB disconnect on device 3
> hub.c: USB new device connect on bus1/2, assigned device number 4
> usb-uhci.c: ENXIO 80000480, flags 0, urb c3b81660, burb c3b81e60
> usb.c: error getting string descriptor 0 (error=-6)
> usb-uhci.c: ENXIO 80000480, flags 0, urb c3b81660, burb c3b81e60
> usb.c: error getting string descriptor 0 (error=-6)
> usb-uhci.c: ENXIO 80000480, flags 0, urb c3b81160, burb c3b81e60
> usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 4 ret -6
> usb-uhci.c: ENXIO 80000480, flags 0, urb c3b81160, burb c3b81e60
> usb-uhci.c: ENXIO 80000480, flags 0, urb c3b81160, burb c3b81e60
> WARNING: USB Mass Storage data integrity not assured
> USB Mass Storage device found at 4
> usb.c: USB disconnect on device 4
>
> Meanwhile, I discovered that maybe this would work, but
> it doesn't
>
> # mount -t usbfs /dev/sda /dc
> mount: fs type usbfs not supported by kernel
>
> Hmmm, hmmm. Looks like I need to compile something into
> the kernel??
>
> Please someone tell me that it's simple, that I already
> have what I need, that all I have to do is click a
> radio button or two somewhere in the make xconfig
> menus, recompile, and reboot.
>
> --
> Lynn
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)