iptables firewall script

--------------Boundary-00=_P1D7HPZXSI98YMJ6R9O9
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 8bit

I had recently acquired broad-band and I had implemented a simple firewall
from the iptables.sh script on the Security-Quickstart mini howto from
Linux.org. I did this after seeing that some web sites, like
www.askjeeves.com and www.purelyrics.com state (as a banner) that I am
broadcasting an ip address. After implementing the script, those banners
have disappeared. But, now I cannot use LimeWire or QTella to connect to
GNUTella. I need some help in editing the script to allow access to
GNUTella. I have included the script in an attachment.

Thanks in advance.


--------------Boundary-00=_P1D7HPZXSI98YMJ6R9O9
Content-Type: application/x-shellscript;
name="iptables.sh"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="iptables.sh"

#!/bin/sh
                #
                # iptables.sh
                #
                # An example of a simple iptables configuration. 
                #
                # This script allows ALL outbound traffic, and denies 
                # ALL inbound connection attempts from the Internet interface only.
                #
                ###################################################################
                # Begin variable declarations and user configuration options ######
                #
                IPTABLES=/usr/sbin/iptables
                # Local Interfaces
                # This is the WAN interface that is our link to the outside world.
                # For pppd and pppoe users.
                # WAN_IFACE="ppp0"
                WAN_IFACE="eth0"
                #

                ## end user configuration options #################################
                ###################################################################

                # Any and all addresses from anywhere.
                ANYWHERE="0/0"

                # This module may need to be loaded:
                #modprobe ip_conntrack_ftp

                # Start building chains and rules #################################
                #
                # Let's start clean and flush all chains to an empty state.
                $IPTABLES -F  

                # Set the default policies of the built-in chains. If no match for any 
                # of the rules below, these will be the defaults that IPTABLES uses.
                $IPTABLES -P FORWARD DROP
                $IPTABLES -P OUTPUT ACCEPT
                $IPTABLES -P INPUT DROP

                # Accept localhost/loopback traffic.
                $IPTABLES -A INPUT -i lo -j ACCEPT

                ## ICMP (ping)
                #
                # ICMP rules, allow the bare essential types of ICMP only. Ping
                # request is blocked, ie we won't respond to someone else's pings,
                # but can still ping out.
                $IPTABLES -A INPUT  -p icmp  --icmp-type echo-reply \
                   -s $ANYWHERE -i $WAN_IFACE -j ACCEPT
                $IPTABLES -A INPUT  -p icmp  --icmp-type destination-unreachable \
                   -s $ANYWHERE -i $WAN_IFACE -j ACCEPT
                $IPTABLES -A INPUT  -p icmp  --icmp-type time-exceeded \
                   -s $ANYWHERE -i $WAN_IFACE -j ACCEPT

                ###################################################################
                # Set the catchall, default rule to DENY, and log it all. All other
                # traffic not allowed by the rules above, winds up here, where it is
                # blocked and logged. This is the default policy for this chain
                # anyway, so we are just adding the logging ability here with '-j
                # LOG'. Outgoing traffic is allowed as the default policy for the
                # 'output' chain. There are no restrictions on that.

                $IPTABLES -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
                $IPTABLES -A INPUT -m state --state NEW -i ! $WAN_IFACE -j ACCEPT
                $IPTABLES -A INPUT -j LOG -m limit --limit 30/minute --log-prefix "Dropping: "

                echo "Iptables firewall is up `date`."

##-- eof iptables.sh

--------------Boundary-00=_P1D7HPZXSI98YMJ6R9O9--