Did you use route add to make 192.168.0.1 the gateway for eth0 on comp
B?
On Sat, 2002-08-24 at 17:51, Clayton Stapleton wrote:
>
> I have two computers, computer A and computer B. They are interconnected
> with a crossover cable plugged into a NIC on each computer.
>
> Computer A (OS SuSE Linux 8.0)
> AMD Athlon XP 1600+, 256 MB RAM, eth0 (D-Link), eth1 (D-Link),
> external modem
> eth0 Automatic address setup (via DHCP)
> eth1 Static address setup (192.168.0.1)
>
> Computer B (OS SuSE Linux 8.0)
> AMD Athlon 1GB, 256 MB RAM, eth0 (builtin 10B/100BTX Ethernet)
> eth0 Static address setup (192.168.0.2)
>
> Masquerade is compiled into the kernel as a module.
>
> I can ping comp A (eth1)to comp B (eth0)and comp B to comp A, comp A can
> ping the ISP's dynamic IP (after dialing in) but comp B gets "network is
> unreachable". I have followed the Masquerade howto but it does not define
> how to setup the NIC (eth0) to be seen by the other two NIC's which are
> interconnected. I have searched google for anything pertaining to my
> situation with no luck. Can someone point me in the right direction?
>
> TIA
> Clayton Stapleton
> Scottsdale, Arizona
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)