This is a multi-part message in MIME format.
------=_NextPartTM-000-6573bc33-12da-11d6-8b85-00d0b79a4f1a
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable
Ok cool, I'll do the NAT. I'll use the site posted (
http://netfilter.samba=
.org/documentation ) as well as the one a friend sent me,
http://www.e-inf=
omax.com/ipmasq/, which looks to be fairly thorough. When I get home, =
I'll try this stuff tonight and see if I can get it to work. Thanks for =
all the help.
Steve
>>> plug@phxinternet.net 01/28/02 02:32PM >>>
Also Steve, you can use nat on the box instead of installing a Proxy=20
server. With NAT, your configuration would be as follows...
Win98:
IP: 10.1.1.2
Mask: 255.255.255.0 or 255.0.0.0 (Don't know what you are using)
Gateway: 10.1.1.1
DNS: Use what your ISP provides
MAC:
IP: 10.1.1.3
Mask: Same as 98 machine
Gateway: 10.1.1.1
DNS: Use what your ISP provides
This may be easier than the Proxy, though it also requires configuration =
on=20
the Caldera box. Your choice. Now in this configuration you would =
have=20
your Windows and Mac machines setup as if they were directly connected =
to=20
the Internet, i.e. NO PROXY BOX CHECKED.
Gilbert
At 02:01 PM 1/28/2002 -0700, you wrote:
>No I don't, wasn't aware that that had to happen. Hmmmm, I'll see if =
it=20
>came with the Caldera OS I bought. I bought the one for $69, and I =
don't=20
>know if it's included.
>
>Steve
>
> >>> plug@phxinternet.net 01/28/02 01:32PM >>>
>Do you have SQUID or some other proxy application running on your Caldera
>box? Without a proxy server listening on eth1 the other machines will =
not
>be able to use proxy settings pointing to the Caldera box to get out onto
>the net.
>
>Gilbert
>
>At 01:03 PM 1/28/2002 -0700, you wrote:
> >New to the linux world. Set up a machine off my cable connection using
> >Caldera(Cal). I have my static IP set up on eth0 and my eth1 set to=20
> 10.1.1.1
> >I can use my browser on Cal, to get out on the net. I want to =
eventually
> >set this box up to be my firewall, because I have 4 machines sitting
> >behind it. For the time being I am just trying to hook up 2 of them. =
A
> >Mac dual G4 and a WIN 98 machine. I have set the WIN 98 up with the
> >address of 10.1.1.2 and the Mac up with 10.1.1.4
> >I went into the Internet Explorer and set it to use a proxy server. =
But I
> >haven't been able to get either of these machines to see out. I set =
the
> >Proxy server address to 10.1.1.1 so I'm not sure if thats the prob or
> >not. I can ping both ways from the WIN 98 to Cal and Cal to WIN 98. I
> >can also ping the Mac from the Cal to the Mac, but the Mac does not
> >currently have Mac Ping on it yet.
> >Where is a good admin source I could use to properly set up my
> >intranet. I have checked the Caldera site for several hours to no
> >avail. Maybe I just keep missing it. I've also tried a number of =
things
> >in the OpenLinux Doc that came with the OS I bought from them.
> >
>
>________________________________________________
>See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't=20=
>post to the list quickly and you use Netscape to write mail.
>
>PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us=20
>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss=20
>
________________________________________________
See
http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't =
post to the list quickly and you use Netscape to write mail.
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us=20
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
------=_NextPartTM-000-6573bc33-12da-11d6-8b85-00d0b79a4f1a
Content-Type: text/plain;
name="InterScan_Disclaimer.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="InterScan_Disclaimer.txt"
The information in this E-mail message is confidential and for
the sole use of the intended recipient. If you are not the
intended recipient, you are hereby notified that any
dissemination, distribution, copying or use of this information
is strictly prohibited. If you received this communication in
error, please notify the sender immediately. Blue Cross and
Blue Shield of Arizona, Inc. and its subsidiaries and affiliates
are not responsible for errors, omissions or personal comments
in this E-mail message.
------=_NextPartTM-000-6573bc33-12da-11d6-8b85-00d0b79a4f1a--
(text/plain)