sniffit

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: Eric Van Buskirk
Date:  
Subject: sniffit
Hi ALL

For epistemic reasons only, I am trying to install sniffit on my RH 7.1.
It's not going to well, as you can see from the error log below. I
downloaded the file from
<http://reptile.rug.ac.be/~coder/sniffit/sniffit.html>. I also added the
associated patch. I then did "./configure"; then "make". Upon "make", I
received error messages. If anyone could offer some suggestions, I would
appreciate it. (PS--My network is a *home* network, so any packets I read
will be my own. :-)).

I tried to continue after the errors with "make install-sh" and "./make
install-sh" but the former returns a message "nothing to be done for
install-sh". Has anyone ever worked with this program?

By the way, what is the best way to send error messages to a log file when
using make? Thanks a lot!


[root@Shitty sniffit.0.3.5]# make

gcc -w -O2 -c

sn_generation.c -I./libpcap-0.3 -L./libpcap-0.3 -DHAVE_LIBNCURSES=1 -DHAVE_N
CURSES_H=1 -DHAVE_SHMGET=1 -DHAVE_ATEXIT=1 -DSIZEOF_UNSIGNED_SHORT_INT=2 -DS
IZEOF_UNSIGNED_LONG_INT=4 -DLINUX=1
gcc -w -O2 -c

sn_interface.c -I./libpcap-0.3 -L./libpcap-0.3 -DHAVE_LIBNCURSES=1 -DHAVE_NC
URSES_H=1 -DHAVE_SHMGET=1 -DHAVE_ATEXIT=1 -DSIZEOF_UNSIGNED_SHORT_INT=2 -DSI
ZEOF_UNSIGNED_LONG_INT=4 -DLINUX=1
gcc -w -O2 -c
sn_cfgfile.c -I./libpcap-0.3 -L./libpcap-0.3 -DHAVE_LIBNCURSES=1 -DHAVE_NCUR
SES_H=1 -DHAVE_SHMGET=1 -DHAVE_ATEXIT=1 -DSIZEOF_UNSIGNED_SHORT_INT=2 -DSIZE
OF_UNSIGNED_LONG_INT=4 -DLINUX=1
gcc -w -O2 -c

sn_logfile.c -I./libpcap-0.3 -L./libpcap-0.3 -DHAVE_LIBNCURSES=1 -DHAVE_NCUR
SES_H=1 -DHAVE_SHMGET=1 -DHAVE_ATEXIT=1 -DSIZEOF_UNSIGNED_SHORT_INT=2 -DSIZE
OF_UNSIGNED_LONG_INT=4 -DLINUX=1
cd libpcap-0.3; make; cd ..
make[1]: Entering directory `/root/sniffit.0.3.5/libpcap-0.3'
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STR ERROR=1 -c ./pcap-linux.c
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STR ERROR=1 -c ./pcap.c
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STR ERROR=1 -c ./inet.c
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STR ERROR=1 -c ./gencode.c
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STR ERROR=1 -c ./optimize.c
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STR ERROR=1 -c ./nametoaddr.c
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STR ERROR=1 -c ./etherent.c
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STR ERROR=1 -c ./savefile.c
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STR ERROR=1 -c ./bpf_filter.c
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STR ERROR=1 -c ./bpf_image.c
flex -Ppcap_ -t scanner.l > $$.scanner.c; mv $$.scanner.c scanner.c
bison -y -p pcap_ -d grammar.y
mv y.tab.c grammar.c
mv y.tab.h tokdefs.h
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STRERROR=1 -c ./scanner.c
gcc -O2 -I. -Ilinux-include -DHAVE_MALLOC_H=1 -DHAVE_ETHER_HOSTTON=1 -DHAVE
_STRERROR=1 -Dyylval=pcap_lval -c grammar.c
ar rc libpcap.a pcap-linux.o pcap.o inet.o gencode.o optimize.o nametoaddr.o
etherent.o savefile.o bpf_filter.o bpf_image.o scanner.o grammar.o
ranlib libpcap.a
make[1]: Leaving directory `/root/sniffit.0.3.5/libpcap-0.3'
gcc -w -O2 -o sniffit sniffit.0.3.5.c sn_packets.o sn_generation.o
sn_interface.o sn_cfgfile.o
sn_logfile.o -I./libpcap-0.3 -L./libpcap-0.3 -lpcap -lncurses -DHAVE_LIBNCU
RSES=1 -DHAVE_NCURSES_H=1 -DHAVE_SHMGET=1 -DHAVE_ATEXIT=1 -DSIZEOF_UNSIGNED_
SHORT_INT=2 -DSIZEOF_UNSIGNED_LONG_INT=4 -DLINUX=1
strip sniffit