array (hardware) question

http://www.linuxdoc.org/HOWTO/mini/DPT-Hardware-RAID-2.html

-----Original Message-----
From: Mike Starke [mailto:mgcon@neta.com]
Sent: Monday, February 05, 2001 1:23 PM
To: plug-discuss@lists.PLUG.phoenix.az.us
Subject: Re: array (hardware) question


Back again: Everything points to the fact that
this card is not supported.

Can anyone recommend a raid card that I can go buy
quickly. One that IS supported.


Mike
mgcon@getnet.com
http://www.getnet.com/~mgcon
Phoenix, AZ
USA

On 5 Feb 2001 proudhawk@uswestmail.net wrote:

> it may not be supported hardware wise,
> but you may be able to use the raid routines in linux and go raid-5 by
setting up the partitions in linux.
>
> I'm am not sure how to do this myself, but I might experiment with the 2
4.3 gig drives I've got just to see if it works.
>
>
> On Mon, 05 February 2001, Mike Starke wrote:
>
> >
> > Just thought I would reply to myself in case some thinks
> > I am off base:
> >
> > The reason I do not have the array when I boot (install)
> > is because the adapter is not supported. It appears as if
> > the adapter is supported as far as being a regular ole
> > scsi adapter, but not raid.
> >
> > Hmmmmmmm, short of software raid (which is why I have the hardware)
> > does anyone have any solutions?
> >
> > Is this card (aaa-131u2) supported in openbsd? I couldn't
> > find a yea or nea on that model at their web site.
> >
> > Mike
> > mgcon@getnet.com
> > http://www.getnet.com/~mgcon
> > Phoenix, AZ
> > USA
> >
> > On Mon, 5 Feb 2001, Mike Starke wrote:
> >
> > > I do not profess to know much about scsi
> > > and array's, so I hope this isn't to dumb
> > > of a question:
> > >
> > > I just placed a adaptec aaa-131u2 array card
> > > in a box; I also have two 18Gb scsi hard drives
> >
>
> ; > in it. I used the adaptec software to configure
> > > a array 1 (mirroring). Right now I am in the process
> > > of formatting the array.
> > >
> > > When I boot to my debian cd, shouldn't the os
> > > just 'see' one hard drive (so to speak)?
> > >
> > > I did all the above earlier, without formatting the array,
> > > booted to debain cd, and I was faced with both hard drives
> > > (sda & sdb), I began the install, partitioned sda (hoping
> > > this was the 'array'), and began the install. I noticed
> > > that data was only being written to the one drive. I then aborted
> > > the install, went back to the adaptec floppy, rebuilt the array,
> > > and I am now formating.
> > >
> > > Guidance anyone?
> > >
> > > Mike
> > > mgcon@getnet.com
> > > http://www.getnet.com/~mgcon
> > > Phoenix, AZ
> > > USA
> > >
> > >
> > > ________________________________________________
> > > See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail
doesn't post to the list quickly and you use Netscape to write mail.
> > >
> > > Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > >
> >
> >
> > ________________________________________________
> > See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't
post to the list quickly and you use Netscape to write mail.
> >
> > Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
>
> Signup for your free USWEST.mail Email account http://www.uswestmail.net
>
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't
post to the list quickly and you use Netscape to write mail.
>
> Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>


________________________________________________
See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post
to the list quickly and you use Netscape to write mail.

Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss