it may not be supported hardware wise,
but you may be able to use the raid routines in linux and go raid-5 by setting up the partitions in linux.
I'm am not sure how to do this myself, but I might experiment with the 2 4.3 gig drives I've got just to see if it works.
On Mon, 05 February 2001, Mike Starke wrote:
>
> Just thought I would reply to myself in case some thinks
> I am off base:
>
> The reason I do not have the array when I boot (install)
> is because the adapter is not supported. It appears as if
> the adapter is supported as far as being a regular ole
> scsi adapter, but not raid.
>
> Hmmmmmmm, short of software raid (which is why I have the hardware)
> does anyone have any solutions?
>
> Is this card (aaa-131u2) supported in openbsd? I couldn't
> find a yea or nea on that model at their web site.
>
> Mike
> mgcon@getnet.com
> http://www.getnet.com/~mgcon
> Phoenix, AZ
> USA
>
> On Mon, 5 Feb 2001, Mike Starke wrote:
>
> > I do not profess to know much about scsi
> > and array's, so I hope this isn't to dumb
> > of a question:
> >
> > I just placed a adaptec aaa-131u2 array card
> > in a box; I also have two 18Gb scsi hard drives
>
; > in it. I used the adaptec software to configure
> > a array 1 (mirroring). Right now I am in the process
> > of formatting the array.
> >
> > When I boot to my debian cd, shouldn't the os
> > just 'see' one hard drive (so to speak)?
> >
> > I did all the above earlier, without formatting the array,
> > booted to debain cd, and I was faced with both hard drives
> > (sda & sdb), I began the install, partitioned sda (hoping
> > this was the 'array'), and began the install. I noticed
> > that data was only being written to the one drive. I then aborted
> > the install, went back to the adaptec floppy, rebuilt the array,
> > and I am now formating.
> >
> > Guidance anyone?
> >
> > Mike
> > mgcon@getnet.com
> > http://www.getnet.com/~mgcon
> > Phoenix, AZ
> > USA
> >
> >
> > ________________________________________________
> > See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.
> >
> > Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> >
>
>
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.
>
> Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Signup for your free USWEST.mail Email account
http://www.uswestmail.net
(text/plain)