nat forwarding

-----Original Message-----
From: Eric Richardson <eric@milagrosoft.com>
Date: Thu, 21 Dec 2000 19:02:54 -0700
To: plug-discuss@lists.PLUG.phoenix.az.us
Subject: Re: nat forwarding


> Pee Kay wrote:
> >
> > Setting up nat and DHCP on the 675 if fairly easy. You can either log into it via telnet or use the console cable that came with it and minicom into it. The manuals that came with 675 are pretty straight forward in telling you how to set the NAT up but if you dont have those you can go here:
>
> How do you telnet to it - I couldn't figure out the IP address cause it
> is in routing mode and I didn't think it had a IP address. I was able to
> use the serial port thanks to some help on this list

When we got the dsl line I ordered a small block of IPS for our network so I had a direct ip to to telnet to. I guess if you are just starting to set it up you wouldnt be able to telnet to it yet. But once you have the nat and dhcp working you could still tlenet to the only external ip you have.



> >
> > http://www.ieng.com/univercd/cc/td/doc/product/dsl_prod/c600s/c675/c675inop/index.htm
> >
> > for all the information you need. The 675 actually has alot of cool features (even does port forwarding) and works really well.
> >
> > A couple things you might want to do while you are in there digging around is change the default passwords and also disable the http server. There is a DOS attack that will choke the 675's if the the http services are running.
> >
>
> I tried to do this a few days ago with no luck. I tried to set up the
> routin mode called "Configurationless provisioning" with DHCP Client and
> Server and NAT. I was using rfc1483 bridging mode to FastQ as my service
> provider.
>
> Do you have to set up a separate VCI channel for the DHCP request from
> the router to the service provider?

It's been a while since I set it up but all i did was really just follow the manual. I just followed the instructions for dhcp and nat and it worked fine the first time.

>
> Who is your service provider?

I used Uswest for both the DSL line and the ISP services.

>
> I'd appreciate any help you could give. Perhaps your config file if you
> can figure out tftp. It has tons of cool features.

I will see if I can get a copy of the config for you. I will just e-mail it to you when I get it.


>
> Eric :-)
>


P-K
--
Get your free email from www.linuxmail.org


Powered by Outblaze