I had posted this one originally, but then remembered to change my reply-to
back to the one I use for plug. Ignore this one. <g>
-----Original Message-----
From:
plug-discuss-admin@lists.PLUG.phoenix.az.us
[
mailto:plug-discuss-admin@lists.PLUG.phoenix.az.us]On Behalf Of Mark
Peoples
Sent: Wednesday, September 27, 2000 8:19 PM
To: PLUG
Subject: rh via ftp
Has anyone installed rh6.2 via FTP, successfully? If so, which server did
you use? I've tried 11 or 12 so far, yet they don't exist (pulled a list
from redhat.com/mirrors.html). When I get one that works (codemeta.com), it
hangs on 'loading second image', or something along those lines.
Any ideas?
Thanks,
Marco
________________________________________________
See
http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post
to the list quickly and you use Netscape to write mail.
Plug-discuss mailing list -
Plug-discuss@lists.PLUG.phoenix.az.us
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
From john w <
wisdom04@home.com> Fri Sep 29 17:04:22 2000
From: john w <
wisdom04@home.com> (john w)
Date: Fri, 29 Sep 2000 10:04:22 -0700
Subject: Fw: X server and resolution
Message-ID: <20000929100422.A305@cx16141-b>
On Fri, 29 Sep 2000 06:20:42 John W wrote:
----- Original Message -----
From: "John W" <
wisdom04@home.com>
To: "wisdom" <
wisdom04@home.com>
Sent: Thursday, September 28, 2000 10:32 PM
Subject: Fw: X server and resolution
>
> ----- Original Message -----
> I should have specified the chipset on my vid card it is an S3 virge
chipset.
The modelines are:
#1024x768 @87hz interlaced 35.5 kHz hsync
modeline "1024x768 44.9 1024 1048 1208 1264 768 776 784 812 interlace
#1024x768 @76Hz 62.5kHz hsync
modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
#1024x768 @85HZ 70.24kHz hsync
modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -hsync
-vsync
#1024x768 @100hz 80.21 kHz syncrate
modelin "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -hsync
-vsync
I hope I managed to get the correct information in there.
John
> >
> > Jason wrote:
> >
> > > John W wrote:
> > > > The setting is just not available.Distros like Mandrake or Red
> Hat
> > > > during test the screen just blinked and never displayed an
> image. I
> > > > have 640x480 and 1024x768 the latter is just too small and vice
> versa.
> > >
> > > What Modeline in /etc/XF86Config is currently associated with the
> > > 1024x768 mode that you are using? If you can find that modeline
> and
> > > post it to the list, I should be able to make a working modeline
> for
> > > 800x600 from it that will be compatible with your monitor.
> > >
> > > What is your monitors horizontal & vertical scan bandwidth?
> > >
> > > The info I am looking for looks something like this (and is in
> > > /etc/XF86Config)
> > >
> > > (yes, a plain S3V card and a Princeton monitor sold as a 1200x1024
> max
> > > can do a reasonable 1600x1200! 55Hz is a little on the blinky side
> > > though.)
> > >
> >
> >
> > ________________________________________________
> > See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail
> doesn't post to the list quickly and you use Netscape to write mail.
> >
> > Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
(text/plain)