dhcpd

Also I'm under the Impression that this will act nearly the same as the
Cisco 675 once setup. Am I right?

John

> From: John Albee <john@empresamexicana.com>
> Reply-To: plug-discuss@lists.PLUG.phoenix.az.us
> Date: Sat, 19 Aug 2000 18:00:29 -0700
> To: PLUG <plug-discuss@lists.PLUG.phoenix.az.us>
> Subject: dhcpd
>
> I have a Linux box with a static IP address 63.x.x.227 (eth0, working just
> fine). I installed httpd from the ISC website. After I installed it I
> started writing the /etc/dhcpd.conf file.
>
> It looks like:
> default-lease-time 7200;
> max-lease-time 14400;
> option subnet-mask 255.255.255.0;
> option broadcast address 10.0.0.255;
> option routers 63.x.x.227;
> option domain-name-servers 206.80.192.1, 201.147.80.5;
> option domain-name "uswest.net";
>
> subnet 10.0.0.0 netmask 255.255.255.0 {
> range 10.0.0.10 10.0.0.100;
> }
>
> I told the daemon at startup to use eth1. when I run dhcpd -d -f to check,
> I get the output:
>
> Listening on LPF/eth1/......../10.0.0.0
> Sending on LPF/eth1/......../10.0.0.0
> No subnet declaration for eth0 (63.x.x.227).
> Please write a subnet delcaration in dhcpd.conf file for the
> networking segment to which the interface eth0 is attached.
> exiting.
>
>
> What am I missing here? The The windows box lease an IP address.
>
> John Albee
>
>
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post
> to the list quickly and you use Netscape to write mail.
>
> Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>