RH 6.2 picked up everything in my system on the install, SB Live, Monitor
(Brand new ViewSonic PF795), Video Card (Diamond Viper 550 - nvidia TNT),
and all my partitions on a 13GB WD HD. Although I didn't use more than /,
/usr, /home, /var, & /tmp. Just FYI.
As far as your HD goes, it may be that the bios settings and the linux
settings do not match. Worth a look. Maybe you should set the settings
manually in the bios.
To fix your monitor just get the info for it, (vert & horiz refresh rates).
And run xf86config or XF86Setup.
The video card is most likely just a driver issue, and for better support, X
4.0.1 (installed from the binaries) worked like a charm on some other S3
cards I have.
To be honest, the fact that it installed my SB Live on install was a real
shocker, as I had spent countless hours previously trying to get it working
with Alsa, and OSS, with various degrees of success. As far as winmodems, I
have a Creative 56k ISA plug & play in there, but I haven't attempted to use
it, because I have Cable.
* Blake
-----Original Message-----
From: Rod Roark [
mailto:rod@sunsetsystems.com]
Sent: Sunday, July 30, 2000 8:30 PM
To:
plug-discuss@lists.PLUG.phoenix.az.us
Subject: Re: trouble getting Linux installed
I gave up on the Trio 3D a while back, too many problems. Dunno about
the modem, check
http://www.o2.net/~gromitkc/winmodem.html. OSSFree
support for SB Live is questionable, ALSA is better. From what you're
describing there may also be a hardware failure somewhere, and if you
ever get things running you should do a few kernel compiles to wring it
out.
Good luck...
-- Rod
http://www.sunsetsystems.com/
On Sun, 30 Jul 2000, you wrote:
> I thought I was a bit more knowledgable, but humble pie again!
>
> The system: AMD 500 K-6 w/128MB, Lan Express lan card (unsupported from
> what I can tell, need to get another), SB Live, Modem Blaster PCI, S3
> Trio3D AGP w/8MB, dedicated 13GB HDD, floppy, CDROM and a Digiview 17"
> monitor.
>
> In trying to load up RH Linux 6.1 that was included in Osborne's "Linux
> Administration, A beginner's guide", it seems to go all the way thru
> except at the end of the install it says to hit 'RETURN' and it will
> re-boot. It doesn't and I hit the reset. The Xconfigurator doesn't see
> the AGP card and I can't startx. I am able to use regular mode. I also
> tried Storm, and Mandrake 7.1 from the Aug/Sept issue of Maximum Linux.
>
> It also seems that too many file systems are bad too. I.E, of the 13GB,
> / = 512MB; /usr = 4GB; /var = /tmp = 2GB ea, swap = 128MB and /home =
> the rest seems to make it but when I tried to also use /boot, /usr1,
> /usr2 I got errors on the re-boot.
>
> Mandrake 7.1 seems to be real good, but I couldn't get the monitor
> settings setup, even tho the graphical setup looked real good.
>
> I've spent most of this fine sunday messing with it. Also tried to use
> RH 5 and upgrade to the 6.1 disc but no go. Storm was worse.
>
> I really liked the Mandrake since it had support for the HP 1000C
> printer and also the S3 AGP card, it's just the monitor.
>
> Anything helpful?
>
> Thanks much in advance and hope to meet some of you at the next meeting.
_______________________________________________
Plug-discuss mailing list -
Plug-discuss@lists.PLUG.phoenix.az.us
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)