This is a multi-part message in MIME format.
--------------A3CFF99CB8073582C821BDFD
Content-Type: multipart/alternative;
boundary="------------741315B6B45E47DBE873E4CB"
--------------741315B6B45E47DBE873E4CB
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Thanks Mike
The wire is going in a machine shop.
Mike I might be a little confused, (please correct me if I am wrong.) When I
say twisted, the cables are definently twisted around each other. The copper
wire inside is not twisted and is solid, is this Cat4? Also the Wire that I
have seen that claims to be shielded is coated in a foil type substance with a
bare wire running on the outside of it. Of course this is all incased in you
typical blue (or color of choice).
The reason we worry about using "shielded" is that that we don't want to be
losing any data do to RF while it is running through the shop.
Conduit would be about the same price to run with labor. As the so called
shielded wire.
Thank you again for you input.
Colin Ansel Rasor
Mike Sheldon wrote:
> Cat-5 isn't Cat-5 unless it's twisted, the twists are what prevents
> interference between the pairs, as well as from outside sources.
>
> As far as shielded Cat-5? I've never seen such a thing. There was a shielded
> twisted pair that IBM used for token-ring, but that's Cat-4. Cat-4 is NOT
> rated for 100mbps
>
> Shielded Pros: Less outside interference in extremely noisy (electrical)
> areas.
>
> Unshielded Pros: 100mbps, much cheaper, resistant to electrical noise in all
> but the worst environments when properly installed.
>
> Use Cat-5 unless you're wiring a machine shop. If you're wiring a machine
> shop, run Cat-5 in metal conduit.
>
> Michael J. Sheldon
> Internet Applications Developer
> Phone: 480.699.1084
> http://www.desertraven.com/
> PGP Key Available on Request
>
> -----Original Message-----
> From: plug-discuss-admin@lists.PLUG.phoenix.az.us
> [mailto:plug-discuss-admin@lists.PLUG.phoenix.az.us]On Behalf Of colin
> rasor
> Sent: Wednesday, June 28, 2000 17:03
> To: plug-discuss@lists.PLUG.phoenix.az.us
> Subject: sheilded Cat-5
>
> Hello everybody,
> I was wondering the best place to buy shielded cat5 non twisted. I am
> looking for around 2000ft.
> What are the pros to using shielded compared to non shielded?
> Colin Ansel Rasor
>
> _______________________________________________
> Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discussthanks
--------------741315B6B45E47DBE873E4CB
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Thanks Mike
<br> The wire is going in a machine shop.
<p> Mike I might be a little confused, (please correct me if I am
wrong.) When I say twisted, the cables are definently twisted around each
other. The copper wire inside is not twisted and is solid, is this Cat4?
Also the Wire that I have seen that claims to be shielded is coated in
a foil type substance with a bare wire running on the outside of it. Of
course this is all incased in you typical blue (or color of choice).
<br> The reason we worry about using "shielded" is that that we don't
want to be losing any data do to RF while it is running through the shop.
<br> Conduit would be about the same price to run with labor. As the
so called shielded wire.
<br>Thank you again for you input.
<br>Colin Ansel Rasor
<br>
<p>Mike Sheldon wrote:
<blockquote TYPE=CITE>Cat-5 isn't Cat-5 unless it's twisted, the twists
are what prevents
<br>interference between the pairs, as well as from outside sources.
<p>As far as shielded Cat-5? I've never seen such a thing. There was a
shielded
<br>twisted pair that IBM used for token-ring, but that's Cat-4. Cat-4
is NOT
<br>rated for 100mbps
<p>Shielded Pros: Less outside interference in extremely noisy (electrical)
<br>areas.
<p>Unshielded Pros: 100mbps, much cheaper, resistant to electrical noise
in all
<br>but the worst environments when properly installed.
<p>Use Cat-5 unless you're wiring a machine shop. If you're wiring a machine
<br>shop, run Cat-5 in metal conduit.
<p>Michael J. Sheldon
<br>Internet Applications Developer
<br>Phone: 480.699.1084
<br><a href="
http://www.desertraven.com/">
http://www.desertraven.com/</a>
<br>PGP Key Available on Request
<p>-----Original Message-----
<br>From:
plug-discuss-admin@lists.PLUG.phoenix.az.us
<br>[<a href="
mailto:plug-discuss-admin@lists.PLUG.phoenix.az.us">
mailto:plug-discuss-admin@lists.PLUG.phoenix.az.us</a>]On
Behalf Of colin
<br>rasor
<br>Sent: Wednesday, June 28, 2000 17:03
<br>To:
plug-discuss@lists.PLUG.phoenix.az.us
<br>Subject: sheilded Cat-5
<p> Hello everybody,
<br>I was wondering the best place to buy shielded cat5 non twisted. I
am
<br>looking for around 2000ft.
<br> What are the pros to using shielded compared to non shielded?
<br>Colin Ansel Rasor
<p>_______________________________________________
<br>Plug-discuss mailing list -
Plug-discuss@lists.PLUG.phoenix.az.us
<br><a href="
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss">
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discussthanks</a></blockquote>
</html>
--------------741315B6B45E47DBE873E4CB--
--------------A3CFF99CB8073582C821BDFD
Content-Type: text/x-vcard; charset=us-ascii;
name=" linuxnet.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for colin rasor
Content-Disposition: attachment;
filename=" linuxnet.vcf"
begin:vcard
n:Rasor;Colin
tel;work:6023040299
x-mozilla-html:FALSE
url:http://www.specializedmillwork.com
org:http://www.specializedmillwork.com;IS
version:2.1
email;internet:linuxnet@home.com
adr;quoted-printable:;; 1918 S. VanBurean st. =0D=0A=0D=0A=0D=0A;Phoenix;AZ;85010;United States of America
x-mozilla-cpt:;2
fn:Colin Rasor
end:vcard
--------------A3CFF99CB8073582C821BDFD--
(text/plain)