CD-R and where I'm at now

Unfortunately, I'm using this HOWTO as well as a stock kernel.

> -----Original Message-----
> From: Rod Roark [mailto:rod@sunsetsystems.com]
> Sent: Tuesday, June 06, 2000 1:53 PM
> To: plug-discuss@lists.PLUG.phoenix.az.us
> Subject: Re: CD-R and where I'm at now
>
>
> The following HOWTO pretty much covers it all. If you've already
> followed it carefully, perhaps something is wrong with your
> kernel build
> procedure and you should try a stock kernel.
>
> http://www.linuxdoc.org/HOWTO/CD-Writing-HOWTO.html
>
> -- Rod
>
> Marc Chung wrote:
> >
> > at what point does nothing begin to work ..?
> >
> > seems that you're running suse.. i'm assuming that it's
> probably 6.4(?)
> > since it says 2.2.13 kernel.. dmesg also says scsi
> emulation has been
> > compiled in (impt!) and that the ide-scsi module has
> sucessfully been
> > loaded.. (also just to verify, are you running stock kernel
> or a custom
> > config?)
> >
> > have you tried running cdrecord -scanbus.. can you send me
> that output too
> >
> > thanks.
> >
> > --
> > Marc Chung [mchung@asu.edu]
> > "I went to the woods because I wanted to live deliberately"
>
> _______________________________________________
> Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>