David,
I am using Cox@Home cable service. Here is the syntax I use:
/sbin/dhcpcd -d -h "CX10xxxx-A" eth1
If something similar doesn't work for you, try removing the dhcp line from
the startup scripts and then starting it after you log in. If that works,
then something is happening out of order in your scripts.
If you still have difficulties, send me the details of your setup and we can
compare notes.
Good luck.
--
Mark "T.C." Thomas
DataWarehouse Programmer
Hotel Information Technology division
Cendant Corporation
-----Original Message-----
From: David Demland [
mailto:ddemland@cadtel.com]
Sent: Monday, April 17, 2000 4:23 PM
To: PLUG Discuss
Subject: Cox and DHCP
This is a multi-part message in MIME format.
------=_NextPart_000_000A_01BFA889.422E74F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
My Linux box has two NICs in it. One has a static IP for the internal =
network, eth0. The second needs to be connected to my cable modem. The =
second one needs DHCP enabled. I have set up eth1 with DHCP using =
linuxconfig. After I do this and reboot I see the network start up. eth0 =
comes up just fine. But eth1 hangs. It does not come back. I think that =
I am not connecting with the DHCP right. I have read the HOWTO on cable =
modems, but it does not address the second NIC. What am I doing wrong?
=20
Thank You,
=20
David Demland
Qa / Testing Manager
CADTEL Systems, Inc.
11201 N. Tatum Ste. 200
Phoenix, AZ 85028
(602) 953-4888
FAX: (602) 953-4833
ddemland@cadtel.com
------=_NextPart_000_000A_01BFA889.422E74F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
(snip)
(text/plain)