I found the following describing how to use autoforward. I have written a
script that runs these commands and another the reverse the forwarding. Have
not tested it yet but the link is at
http://www.tsmservices.com/masq/detailform.php3?132
Primary TCP connections:
This will allow what microsoft calls the 'Primary TCPConnections' to work.
This will allow such features as: applicationsharing, whiteboard, chat, file
transfer, and directory lookups.
ipmasqadm autofw -A -r tcp 389 389
ipmasqadm autofw -A -r tcp 522 522
ipmasqadm autofw -A -r tcp 1503 1503
ipmasqadm autofw -A -r tcp 1720 1720
ipmasqadm autofw -A -r tcp 1731 1731
You can make only outgoing calls. I have not tried incomming calls but itmay
work if you have previously connected to the same user.
Secondary TCP/UDP connections:
This will allow what microsoft calls the 'Secondary TCP and UDPConnections'
to work. This will allow such features as: audio and videoconferencing using
the H.323 protocol.
ipmasqadm autofw -A -r tcp 1024 65535
ipmasqadm autofw -A -r udp 1024 65535
I have also looked in all the How-To's and checked Microsoft's site and the
ports listed are identical to the ones listed above.
Still working on it.
Thanks,
Donn
----- Original Message -----
From: "Donn Shumway" <
dshumway@speedchoice.com>
To: <
plug-discuss@lists.PLUG.phoenix.az.us>
Sent: Wednesday, April 12, 2000 8:53 PM
Subject: Netmeeting through a linux Masq box
> Does anyone have any experience using Netmeeting through a Linux =
> (Mandrake v6.1) masquerade internet connection? My wife has started an =
> online class at UoP and needs to connect to her study group via =
> Netmeeting. I have installed and tested inside the firewall - works =
> fine. But need to know if there is a specific port(s) that need to be =
> opened to allow it to work. I appreciate any help.
>
> Regards,
> Donn
>
>
>
>
> _______________________________________________
> Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>