mounting a digital camera USB device

[Mike Starke]

I mount my camera (compact flash) as '-t msdos'. Have you tried
that?


On Thu, Oct 17, 2002 at 07:12:19PM -0700, Lynn David Newton wrote:
 
 Re: mounting a Sony Mavica CD1000 as a USB device:
 
   Bill> Check your `dmesg` output and see what the
   Bill> kernel reports when it detects the device.
   Bill> There may be helpful information there.
 
 Hmmm, okay here's what I see:
 
 $ dmesg | grep -i usb
 hub.c: USB new device connect on bus1/2, assigned device number 2
 usb.c: USB device 2 (vend/prod 0x54c/0x24) is not claimed by any active driver.
 Initializing USB Mass Storage driver...
 usb.c: registered new driver usb-storage
 scsi1 : SCSI emulation for USB Mass Storage devices
 usb-uhci.c: interrupt, status 3, frame# 710
 usb-uhci.c: interrupt, status 3, frame# 715
 WARNING: USB Mass Storage data integrity not assured
 USB Mass Storage device found at 2
 USB Mass Storage support registered.
 usb.c: USB disconnect on device 2
 hub.c: USB new device connect on bus1/2, assigned device number 3
 usb-uhci.c: ENXIO 80000380, flags 0, urb c3b81be0, burb c3b81760
 usb.c: error getting string descriptor 0 (error=-6)
 usb-uhci.c: ENXIO 80000380, flags 0, urb c3b81be0, burb c3b81760
 usb.c: error getting string descriptor 0 (error=-6)
 usb-uhci.c: ENXIO 80000380, flags 0, urb c3b81be0, burb c3b81760
 usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 4 ret -6
 WARNING: USB Mass Storage data integrity not assured
 USB Mass Storage device found at 3
 usb.c: USB disconnect on device 3
 hub.c: USB new device connect on bus1/2, assigned device number 4
 usb-uhci.c: ENXIO 80000480, flags 0, urb c3b81660, burb c3b81e60
 usb.c: error getting string descriptor 0 (error=-6)
 usb-uhci.c: ENXIO 80000480, flags 0, urb c3b81660, burb c3b81e60
 usb.c: error getting string descriptor 0 (error=-6)
 usb-uhci.c: ENXIO 80000480, flags 0, urb c3b81160, burb c3b81e60
 usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 4 ret -6
 usb-uhci.c: ENXIO 80000480, flags 0, urb c3b81160, burb c3b81e60
 usb-uhci.c: ENXIO 80000480, flags 0, urb c3b81160, burb c3b81e60
 WARNING: USB Mass Storage data integrity not assured
 USB Mass Storage device found at 4
 usb.c: USB disconnect on device 4
 
 Meanwhile, I discovered that maybe this would work, but
 it doesn't
 
 # mount -t usbfs /dev/sda /dc
 mount: fs type usbfs not supported by kernel
 
 Hmmm, hmmm. Looks like I need to compile something into
 the kernel?? 
 
 Please someone tell me that it's simple, that I already
 have what I need, that all I have to do is click a
 radio button or two somewhere in the make xconfig
 menus, recompile, and reboot.
 
 -- 
 Lynn
 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
 PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
 To subscribe, unsubscribe, or to change  you mail settings:
 http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss