CPU Temperature Monitoring & Limits

Dr.G plug-discuss@lists.plug.phoenix.az.us
Mon, 17 Jun 2002 11:49:55 -0700


AMD rates the XPs as being "Perfectly Normal" at under 90 dgerees celcius I
believe (Go to thier site for more info)

So. yes. You have a very powerful CPU that runs VERY hot. But it should be
stable. So...



----- Original Message -----
From: <jon@unfm00.com>
To: <plug-discuss@lists.plug.phoenix.az.us>
Sent: Monday, June 17, 2002 11:42 AM
Subject: RE: Re: CPU Temperature Monitoring & Limits


> Yeah I have just about given up... It works fine and I have not crashed
yet.
>
> Original Message:
> -----------------
> From: Dr.G drghastly@cox.net
> Date: Mon, 17 Jun 2002 11:09:31 -0700
> To: plug-discuss@lists.plug.phoenix.az.us
> Subject: Re: CPU Temperature Monitoring & Limits
>
>
> I have almost the exact same set up you do, except I have a 1800+. Your
CPU
> is running at normal temperature. They just run freaking hot as hell. The
> only thing you can do is water cool it to get it to a lower temp.
Otherwise
> your pretty much SOL. That is the reason, in fact, I am switching to a P4
> 1.6B (cause you can OC the hell out of it) at it runs about 90 degrees
> farenheit, standard. I do not need a heat lamp for a PC.
>
>
>
> ----- Original Message -----
> From: "Larry Lauer" <llauer@azmotorsports.com>
> To: <plug-discuss@lists.plug.phoenix.az.us>
> Sent: Monday, June 17, 2002 10:58 AM
> Subject: RE: CPU Temperature Monitoring & Limits
>
>
> > Any thing cooling those drives?
> >
> > Larry
> >
> > -----Original Message-----
> > From: jon@unfm00.com [mailto:jon@unfm00.com]
> > Sent: Monday, June 17, 2002 10:05 AM
> > To: plug-discuss@lists.plug.phoenix.az.us
> > Subject: RE: CPU Temperature Monitoring & Limits
> >
> >
> > Man I hate to get started on this subject.  I built a AthlonXP with the
> problem below:
> >
> > "amd 2100+
> > asus a7v333
> > pc-3000 512mb cl 2.0 @2,2,2,5T
> > gforce 3 PNY (not a TI card)
> > 4 ata/133 Maxtor 40g drives two are Raid level 0
> > volcano 7+ Heat sink fan 6500rpm/copper heat sink
> > 4 intake fans three exit fans including power supply
> > 350watt power supply.
> > latest bios 1007
> > artic silver goop
> >
> > Processor runs at 1755mhz due to a factory overclock of 5mhz by Asus.
> >
> > At any rate the box is fast, very fast, but my question is its running
> hot, and no mater what I have tried it still runs hot. Idle about 57°c and
> 63°c full load. The threshold for the Amd xp 2100+ is 90°c. so this is
what
> I have done.
> >
> > I have tried two different Asus a7v333 mobo, same temp readings, two
> different 2100+ processors, two different 350watt power supplies, i have
> tried the oem heat sink & fan that came with it and my volcano 7+ runs
> faster and cooler, still hot. tested my friends 1800+ and he ran in the
40s
> with my setup. My room Temp is about 80-82°F. I replaced all the fans in
the
> chase with 2600rpm 80x80xwhatever fans, that supplies a little more
airflow
> along with the power supply that has the extra fan in it. All my cables
are
> tied off and out of the way for maximum air flow. But the damn thing runs
> hot. I'm reasonably sure that I'm not overclocking anything.
> > vcore 1.75
> > cpu/pcibus 133/33
> > cpu/mem raio 4:5"
> >
> > After I did some research, Asus stands behind thier boards and said any
> temp below 70°c is fine.  I'm still not to happy about my temp being in
the
> 60s. But I have been running this computer for over a 4week and I have not
> had it crash yet, even after 8hours of compiling.
> >
> > http://unixmafia.port5.com/news/00211001.html  <--- this guy had the
same
> problem just with an older board, and I have that board at it to runs at
> 60°c all the time.
> >
> > Does anyone else run any asus mobo?
> >
> > jon
> >
> > Original Message:
> > -----------------
> > From: George Toft george@georgetoft.com
> > Date: Mon, 17 Jun 2002 07:26:44 -0400
> > To: plug-discuss@lists.plug.phoenix.az.us
> > Subject: CPU Temperature Monitoring & Limits
> >
> >
> > Where can I find recommended CPU temperature limits for an AMD Duron?  I
> > have the AMD Duron Processor 3 Technical Specification Sheets, and all
> > it says is "Maximum die temperature 90C."  Recognizing there is a
> > thermal gradient between the CPU and the temperature sensor, does anyone
> > have any ideas what the maximum temperature I should experience for a
> > healthy PC?  I have not found any concrete numbers on the 'Net.
> >
> > I configured "sensors" yesterday, and wrote a script to log system load
> > and CPU temp over time, which results in this output:
> > 06-17-2002 06:47:00   0.09  95.5°F  TX: 271kbps RX: 150kbps
> > 06-17-2002 06:48:00   0.19  96.1°F  TX: 270kbps RX: 194kbps
> > 06-17-2002 06:49:00   0.13  96.1°F  TX: 271kbps RX: 185kbps
> > 06-17-2002 06:50:01   0.21  96.1°F  TX: 264kbps RX: 201kbps
> > 06-17-2002 06:51:00   0.24  96.4°F  TX: 201kbps RX: 240kbps
> > 06-17-2002 06:52:00   0.37  97.2°F  TX: 270kbps RX: 193kbps
> > 06-17-2002 06:53:01   1.17  103.5°F  TX: 272kbps RX: 176kbps
> > 06-17-2002 06:54:00   0.76  105.3°F  TX: 269kbps RX: 204kbps
> > 06-17-2002 06:55:01   0.66  107.2°F  TX: 259kbps RX: 209kbps
> > 06-17-2002 06:56:01   0.84  110.1°F  TX: 272kbps RX: 200kbps
> > 06-17-2002 06:57:01   1.85  111.4°F  TX: 270kbps RX: 177kbps
> > 06-17-2002 06:58:01   1.62  112.3°F  TX: 269kbps RX: 183kbps
> > 06-17-2002 06:59:01   1.01  113.4°F  TX: 220kbps RX: 218kbps
> > 06-17-2002 07:00:02   0.81  113.7°F  TX: 222kbps RX: 212kbps
> >
> > (As you can see, I also incorporated tracking network traffic from a
> > previous thread as well.  This script is located on my web site.)
> >
> > I then ran the machine ragged playing an AVI movie in full-screen mode
> > for over 1.5 hours.  The CPU temperature reached 127F and held steady.
> > I set my alarm at 129F and reset (hysteresis) at 127F.  Do these sound
> > like reasonable values?  Obviously, cooler is better, but I don't have
> > $200 for a liquid cooling system.
> >
> > Thanks in advance.
> >
> > George
> >
> > --
> > If you feel you have received a virus from me, please read
> > http://www.georgetoft.com/virus.html
> > because it wasn't me!
> > --
> > ________________________________________________
> > See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't
> post to the list quickly and you use Netscape to write mail.
> >
> > PLUG-discuss mailing list  -  PLUG-discuss@lists.plug.phoenix.az.us
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> >
> > --------------------------------------------------------------------
> > mail2web - Check your email from the web at
> > http://mail2web.com/ .
> >
> > ________________________________________________
> > See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't
> post to the list quickly and you use Netscape to write mail.
> >
> > PLUG-discuss mailing list  -  PLUG-discuss@lists.plug.phoenix.az.us
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > ________________________________________________
> > See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't
> post to the list quickly and you use Netscape to write mail.
> >
> > PLUG-discuss mailing list  -  PLUG-discuss@lists.plug.phoenix.az.us
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> >
>
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't
post to the list quickly and you use Netscape to write mail.
>
> PLUG-discuss mailing list  -  PLUG-discuss@lists.plug.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
>
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't
post to the list quickly and you use Netscape to write mail.
>
> PLUG-discuss mailing list  -  PLUG-discuss@lists.plug.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>