hardware problems

Matt Alexander plug-discuss@lists.PLUG.phoenix.az.us
Tue, 18 Sep 2001 22:38:21 -0700 (PDT)


I usually see that error when I accidentally plug the floppy cable in
backwards on either the motherboard or the floppy drive.  Make sure the
little red line on the cable is going to pin 1.
~M

__
This email uses only 100% recycled electrons.


On Tue, 18 Sep 2001, robert jorgenson wrote:

> Okay every time i try and boot from the floppy i get this error "floppy
> disk(s) fail (40)" I have tried everything short of replacing the floppy
> drive because i know it works i tried it on a different computer. I have
> replaced the ide cable, i made sure it was plugged in right, i made sure
> power was plugged in right, i made sure everything was right in the
> bios, i checked the boot floppy i am using on another computer. The only
> problem with the floppy though is it wont boot, if i tell bios to ignore
> all errors it boots fine, but since i dont have anything on my harddrive
> and my bios cant boot from the cd-rom this doesn't help me at all...i
> have to be able to boot from the floppy and cant seem to find a way to
> fix it. If anyone can help me i would appreciate it alot, i know this is
> kinda off subject from linux so if you want to keep it off the list just
> e-mail me at snoogans@qwest.net
>
>
> -Thanx
>
> The Newbie
>
> ________________________________________________
> See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.
>
> PLUG-discuss mailing list  -  PLUG-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>