eth0 won't come up

Bryce plug-discuss@lists.PLUG.phoenix.az.us
Sun, 11 Nov 2001 15:03:16 -0700 

Are you sure the firewall has a working DHCP server?  WinBLOWS, when you say
to get IP via DHCP, and no DHCP is found, it'll set its own to something
like 152.50.0.1.  In WinBLOWS, run winipcfg, click more info, and see if
there's anything in the DHCP server field.  To get around in today's
economy, you need to be versed in as much as you can.


Bryce C.
Network Administrator / Scripting Consultant
CoBryce Communications
Bryce@BryceCo.Net
http://www.BryceCo.Net

-----Original Message-----
From: plug-discuss-admin@lists.PLUG.phoenix.az.us
[mailto:plug-discuss-admin@lists.PLUG.phoenix.az.us]On Behalf Of Jeff
Barker
Sent: Sunday, November 11, 2001 2:42 PM
To: plug-discuss@lists.PLUG.phoenix.az.us
Subject: Re: eth0 won't come up


At 01:44 PM 11/11/2001, you wrote:
>At 01:08 PM 11/11/01 -0700, you wrote:
>>Give us the text from the console on bootup.
>>
>>All the messages you see while it's loading? Paste them in here.
>
>OK, this is the text from boot.log followed by the text from messages
(before you ask for them).
>
>Thank you all for eating time with all of this.  I really want to get back
into Linux.
>
>Alan
>
>boot.log--------------------
>
>Nov 11 13:32:05 localhost syslog: syslogd startup succeeded
>Nov 11 13:32:05 localhost syslog: klogd startup succeeded
>Nov 11 13:32:06 localhost portmap: portmap startup succeeded
>Nov 11 13:32:06 localhost nfslock: rpc.statd startup succeeded
>Nov 11 13:32:06 localhost keytable: Loading keymap:  succeeded
>Nov 11 13:32:07 localhost keytable: Loading system font:  succeeded
>Nov 11 13:32:07 localhost random: Initializing random number generator:
succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Mounting proc filesystem:  succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Unmounting initrd:  succeeded
>Nov 11 13:30:51 localhost sysctl: net.ipv4.ip_forward = 0
>Nov 11 13:30:51 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
>Nov 11 13:30:51 localhost sysctl: kernel.sysrq = 0
>Nov 11 13:30:51 localhost rc.sysinit: Configuring kernel parameters:
succeeded
>Nov 11 13:30:51 localhost date: Sun Nov 11 13:30:43 MST 2001
>Nov 11 13:30:51 localhost rc.sysinit: Setting clock  (localtime): Sun Nov
11 13:30:43 MST 2001 succeeded
>Nov 11 13:32:09 localhost netfs: Mounting other filesystems:  succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Loading default keymap succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Setting default font (lat0-sun16):
succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Activating swap partitions:
succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Setting hostname
localhost.localdomain:  succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Mounting USB filesystem:  succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Initializing USB controller
(usb-uhci):  succeeded
>Nov 11 13:30:51 localhost fsck: /: clean, 97743/486720 files, 391241/973350
blocks
>Nov 11 13:32:10 localhost autofs: automount startup succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Checking root filesystem succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Remounting root filesystem in
read-write mode:  succeeded
>Nov 11 13:30:52 localhost rc.sysinit: Finding module dependencies:
succeeded
>Nov 11 13:32:11 localhost sshd: Starting sshd:
>Nov 11 13:30:53 localhost fsck: /boot: clean, 37/13272 files, 7762/52920
blocks
>Nov 11 13:30:53 localhost rc.sysinit: Checking filesystems succeeded
>Nov 11 13:30:53 localhost rc.sysinit: Mounting local filesystems:
succeeded
>Nov 11 13:30:53 localhost rc.sysinit: Enabling local filesystem quotas:
succeeded
>Nov 11 13:32:12 localhost sshd:  succeeded
>Nov 11 13:30:54 localhost rc.sysinit: Enabling swap space:  succeeded
>Nov 11 13:32:12 localhost sshd:
>Nov 11 13:30:58 localhost kudzu: Updating /etc/fstab succeeded
>Nov 11 13:32:13 localhost rc: Starting sshd:  succeeded
>Nov 11 13:31:02 localhost kudzu:  succeeded
>Nov 11 13:31:02 localhost ipchains: Flushing all current rules and user
defined chains: succeeded
>Nov 11 13:31:02 localhost ipchains: Clearing all current rules and user
defined chains: succeeded
>Nov 11 13:31:03 localhost ipchains: Applying ipchains firewall rules
succeeded
>Nov 11 13:31:03 localhost sysctl: net.ipv4.ip_forward = 0
>Nov 11 13:31:03 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
>Nov 11 13:31:03 localhost sysctl: kernel.sysrq = 0
>Nov 11 13:31:03 localhost network: Setting network parameters:  succeeded
>Nov 11 13:31:04 localhost network: Bringing up interface lo:  succeeded
>Nov 11 13:31:05 localhost ifup: Determining IP information for eth0...
>Nov 11 13:32:05 localhost ifup:  failed.
>Nov 11 13:32:05 localhost network: Bringing up interface eth0:  failed
>Nov 11 13:32:17 localhost xinetd: xinetd startup succeeded
>Nov 11 13:32:24 localhost sendmail: sendmail startup succeeded
>Nov 11 13:32:24 localhost gpm: gpm startup succeeded
>Nov 11 13:32:25 localhost crond: crond startup succeeded
>Nov 11 13:32:27 localhost xfs: xfs startup succeeded
>Nov 11 13:32:27 localhost anacron: anacron startup succeeded
>Nov 11 13:32:28 localhost atd: atd startup succeeded
>Nov 11 13:32:28 localhost rc: Starting wine:  succeeded
>
>messages----------------
>
>Nov 11 13:32:05 localhost syslogd 1.4.1: restart.
>Nov 11 13:32:05 localhost syslog: syslogd startup succeeded
>Nov 11 13:32:05 localhost syslog: klogd startup succeeded
>Nov 11 13:32:05 localhost kernel: klogd 1.4.1, log source = /proc/kmsg
started.
>Nov 11 13:32:05 localhost kernel: Inspecting /boot/System.map-2.4.7-10
>Nov 11 13:32:06 localhost portmap: portmap startup succeeded
>Nov 11 13:32:06 localhost rpc.statd[701]: Version 0.3.1 Starting
>Nov 11 13:32:06 localhost nfslock: rpc.statd startup succeeded
>Nov 11 13:32:06 localhost kernel: Loaded 15327 symbols from
/boot/System.map-2.4.7-10.
>Nov 11 13:32:06 localhost kernel: Symbols match kernel version 2.4.7.
>Nov 11 13:32:06 localhost kernel: Loaded 308 symbols from 11 modules.
>Nov 11 13:32:06 localhost kernel: Linux version 2.4.7-10
(bhcompile@stripples.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat
Linux 7.1 2.96-98)) #1 Thu Sep 6 17:21:28 EDT 2001
>Nov 11 13:32:06 localhost kernel: BIOS-provided physical RAM map:
>Nov 11 13:32:06 localhost kernel:  BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
>Nov 11 13:32:06 localhost kernel:  BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
>Nov 11 13:32:06 localhost kernel:  BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
>Nov 11 13:32:06 localhost kernel:  BIOS-e820: 0000000000100000 -
0000000008000000 (usable)
>Nov 11 13:32:06 localhost kernel:  BIOS-e820: 00000000fffe0000 -
0000000100000000 (reserved)
>Nov 11 13:32:06 localhost kernel: On node 0 totalpages: 32768
>Nov 11 13:32:06 localhost kernel: zone(0): 4096 pages.
>Nov 11 13:32:06 localhost kernel: zone(1): 28672 pages.
>Nov 11 13:32:06 localhost kernel: zone(2): 0 pages.
>Nov 11 13:32:06 localhost kernel: Kernel command line: ro root=/dev/hda3
>Nov 11 13:32:06 localhost kernel: Initializing CPU#0
>Nov 11 13:32:06 localhost keytable: Loading keymap:  succeeded
>Nov 11 13:32:06 localhost kernel: Detected 395.188 MHz processor.
>Nov 11 13:32:07 localhost kernel: Console: colour VGA+ 80x25
>Nov 11 13:32:07 localhost kernel: Calibrating delay loop... 788.07 BogoMIPS
>Nov 11 13:32:07 localhost kernel: Memory: 125228k/131072k available (1280k
kernel code, 4556k reserved, 90k data, 216k init, 0k highmem)
>Nov 11 13:32:07 localhost kernel: Dentry-cache hash table entries: 16384
(order: 5, 131072 bytes)
>Nov 11 13:32:07 localhost keytable: Loading system font:  succeeded
>Nov 11 13:32:07 localhost kernel: Inode-cache hash table entries: 8192
(order: 4, 65536 bytes)
>Nov 11 13:32:07 localhost kernel: Mount-cache hash table entries: 2048
(order: 2, 16384 bytes)
>Nov 11 13:32:07 localhost kernel: Buffer-cache hash table entries: 8192
(order: 3, 32768 bytes)
>Nov 11 13:32:07 localhost kernel: Page-cache hash table entries: 32768
(order: 6, 262144 bytes)
>Nov 11 13:32:07 localhost kernel: CPU: L1 I Cache: 32K (32 bytes/line), D
cache 32K (32 bytes/line)
>Nov 11 13:32:07 localhost random: Initializing random number generator:
succeeded
>Nov 11 13:32:07 localhost kernel: CPU: AMD-K6(tm) 3D processor stepping 0c
>Nov 11 13:30:51 localhost rc.sysinit: Mounting proc filesystem:  succeeded
>Nov 11 13:32:07 localhost kernel: Checking 'hlt' instruction... OK.
>Nov 11 13:30:51 localhost rc.sysinit: Unmounting initrd:  succeeded
>Nov 11 13:32:07 localhost kernel: Checking for popad bug... OK.
>Nov 11 13:32:07 localhost kernel: POSIX conformance testing by UNIFIX
>Nov 11 13:32:08 localhost kernel: mtrr: v1.40 (20010327) Richard Gooch
(rgooch@atnf.csiro.au)
>Nov 11 13:30:51 localhost sysctl: net.ipv4.ip_forward = 0
>Nov 11 13:30:51 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
>Nov 11 13:30:51 localhost sysctl: kernel.sysrq = 0
>Nov 11 13:32:08 localhost kernel: mtrr: detected mtrr type: AMD K6
>Nov 11 13:32:08 localhost kernel: PCI: PCI BIOS revision 2.10 entry at
0xfa114, last bus=1
>Nov 11 13:32:08 localhost kernel: PCI: Using configuration type 1
>Nov 11 13:30:51 localhost rc.sysinit: Configuring kernel parameters:
succeeded
>Nov 11 13:32:08 localhost kernel: PCI: Probing PCI hardware
>Nov 11 13:30:51 localhost date: Sun Nov 11 13:30:43 MST 2001
>Nov 11 13:32:08 localhost kernel: Unknown bridge resource 2: assuming
transparent
>Nov 11 13:30:51 localhost rc.sysinit: Setting clock  (localtime): Sun Nov
11 13:30:43 MST 2001 succeeded
>Nov 11 13:32:08 localhost kernel: PCI: Using IRQ router VIA [1106/0586] at
00:14.0
>Nov 11 13:32:09 localhost netfs: Mounting other filesystems:  succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Loading default keymap succeeded
>Nov 11 13:32:09 localhost kernel: Activating ISA DMA hang workarounds.
>Nov 11 13:30:51 localhost rc.sysinit: Setting default font (lat0-sun16):
succeeded
>Nov 11 13:32:09 localhost kernel: isapnp: Scanning for PnP cards...
>Nov 11 13:30:51 localhost rc.sysinit: Activating swap partitions:
succeeded
>Nov 11 13:32:09 localhost kernel: isapnp: No Plug & Play device found
>Nov 11 13:30:51 localhost rc.sysinit: Setting hostname
localhost.localdomain:  succeeded
>Nov 11 13:32:09 localhost kernel: Linux NET4.0 for Linux 2.4
>Nov 11 13:30:51 localhost rc.sysinit: Mounting USB filesystem:  succeeded
>Nov 11 13:32:10 localhost kernel: Based upon Swansea University Computer
Society NET3.039
>Nov 11 13:30:51 localhost rc.sysinit: Initializing USB controller
(usb-uhci):  succeeded
>Nov 11 13:32:10 localhost kernel: Initializing RT netlink socket
>Nov 11 13:30:51 localhost fsck: /: clean, 97743/486720 files, 391241/973350
blocks
>Nov 11 13:32:10 localhost kernel: apm: BIOS not found.
>Nov 11 13:32:10 localhost autofs: automount startup succeeded
>Nov 11 13:30:51 localhost rc.sysinit: Checking root filesystem succeeded
>Nov 11 13:32:10 localhost kernel: Starting kswapd v1.8
>Nov 11 13:30:51 localhost rc.sysinit: Remounting root filesystem in
read-write mode:  succeeded
>Nov 11 13:32:10 localhost kernel: VFS: Diskquotas version dquot_6.5.0
initialized
>Nov 11 13:30:52 localhost rc.sysinit: Finding module dependencies:
succeeded
>Nov 11 13:32:11 localhost kernel: pty: 512 Unix98 ptys configured
>Nov 11 13:32:11 localhost sshd: Starting sshd:
>Nov 11 13:30:53 localhost fsck: /boot: clean, 37/13272 files, 7762/52920
blocks
>Nov 11 13:32:11 localhost kernel: Serial driver version 5.05c (2001-07-08)
with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
>Nov 11 13:30:53 localhost rc.sysinit: Checking filesystems succeeded
>Nov 11 13:32:11 localhost kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
>Nov 11 13:30:53 localhost rc.sysinit: Mounting local filesystems:
succeeded
>Nov 11 13:32:12 localhost kernel: PCI: Found IRQ 10 for device 00:03.0
>Nov 11 13:30:53 localhost rc.sysinit: Enabling local filesystem quotas:
succeeded
>Nov 11 13:32:12 localhost kernel: IRQ routing conflict for 00:03.0, have
irq 11, want irq 10
>Nov 11 13:32:12 localhost sshd:  succeeded
>Nov 11 13:30:54 localhost rc.sysinit: Enabling swap space:  succeeded
>Nov 11 13:32:12 localhost kernel: IRQ routing conflict for 01:00.0, have
irq 11, want irq 10
>Nov 11 13:32:12 localhost sshd:
>Nov 11 13:30:57 localhost init: Entering runlevel: 3
>Nov 11 13:32:13 localhost kernel: Real Time Clock Driver v1.10d
>Nov 11 13:30:58 localhost kudzu: Updating /etc/fstab succeeded
>Nov 11 13:32:13 localhost rc: Starting sshd:  succeeded
>Nov 11 13:32:13 localhost kernel: block: queued sectors max/low
83117kB/27705kB, 256 slots per queue
>Nov 11 13:31:02 localhost kudzu:  succeeded
>Nov 11 13:32:13 localhost kernel: RAMDISK driver initialized: 16 RAM disks
of 4096K size 1024 blocksize
>Nov 11 13:31:02 localhost ipchains: Flushing all current rules and user
defined chains: succeeded
>Nov 11 13:32:13 localhost kernel: Uniform Multi-Platform E-IDE driver
Revision: 6.31
>Nov 11 13:31:02 localhost ipchains: Clearing all current rules and user
defined chains: succeeded
>Nov 11 13:32:13 localhost kernel: ide: Assuming 33MHz PCI bus speed for PIO
modes; override with idebus=xx
>Nov 11 13:31:03 localhost ipchains: Applying ipchains firewall rules
succeeded
>Nov 11 13:32:13 localhost kernel: VP_IDE: IDE controller on PCI bus 00 dev
a1
>Nov 11 13:31:03 localhost sysctl: net.ipv4.ip_forward = 0
>Nov 11 13:32:13 localhost kernel: VP_IDE: chipset revision 6
>Nov 11 13:31:03 localhost sysctl: net.ipv4.conf.default.rp_filter = 1
>Nov 11 13:32:14 localhost kernel: VP_IDE: not 100%% native mode: will probe
irqs later
>Nov 11 13:31:03 localhost sysctl: kernel.sysrq = 0
>Nov 11 13:32:14 localhost kernel: ide: Assuming 33MHz PCI bus speed for PIO
modes; override with idebus=xx
>Nov 11 13:31:03 localhost network: Setting network parameters:  succeeded
>Nov 11 13:32:14 localhost kernel: VP_IDE: VIA vt82c586b (rev 45) IDE UDMA33
controller on pci00:14.1
>Nov 11 13:31:04 localhost network: Bringing up interface lo:  succeeded
>Nov 11 13:32:14 localhost kernel:     ide0: BM-DMA at 0x20a0-0x20a7, BIOS
settings: hda:DMA, hdb:pio
>Nov 11 13:31:05 localhost ifup: Determining IP information for eth0...
>Nov 11 13:32:14 localhost kernel:     ide1: BM-DMA at 0x20a8-0x20af, BIOS
settings: hdc:DMA, hdd:DMA
>Nov 11 13:32:14 localhost kernel: hda: QUANTUM Bigfoot TX12.0AT, ATA DISK
drive
>Nov 11 13:32:05 localhost dhcpcd[620]: timed out waiting for a valid DHCP
server response
>Nov 11 13:32:14 localhost kernel: hdc: COMPAQ DVD-ROM GD-2500, ATAPI
CD/DVD-ROM drive
>Nov 11 13:32:15 localhost kernel: hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY
drive
>Nov 11 13:32:05 localhost ifup:  failed.
>Nov 11 13:32:15 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Nov 11 13:32:15 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
>Nov 11 13:32:05 localhost network: Bringing up interface eth0:  failed
>Nov 11 13:32:15 localhost kernel: hda: 23547888 sectors (12057 MB) w/69KiB
Cache, CHS=1557/240/63, UDMA(33)
>Nov 11 13:32:15 localhost kernel: ide-floppy driver 0.97
>Nov 11 13:32:15 localhost kernel: hdd: No disk in drive
>Nov 11 13:32:15 localhost kernel: hdd: 98304kB, 96/64/32 CHS, 4096 kBps,
512 sector size, 2941 rpm
>Nov 11 13:32:15 localhost kernel: ide-floppy: hdd: I/O error, pc = 5a, key
=  5, asc = 24, ascq =  0
>Nov 11 13:32:15 localhost kernel: Partition check:
>Nov 11 13:32:15 localhost kernel:  hda: hda1 hda2 hda3 hda4 < hda5 >
>Nov 11 13:32:15 localhost kernel: Floppy drive(s): fd0 is 1.44M
>Nov 11 13:32:15 localhost kernel: FDC 0 is a post-1991 82077
>Nov 11 13:32:15 localhost kernel: ide-floppy driver 0.97
>Nov 11 13:32:15 localhost kernel: md: md driver 0.90.0 MAX_MD_DEVS=256,
MD_SB_DISKS=27
>Nov 11 13:32:15 localhost kernel: md: Autodetecting RAID arrays.
>Nov 11 13:32:15 localhost kernel: md: autorun ...
>Nov 11 13:32:15 localhost kernel: md: ... autorun DONE.
>Nov 11 13:32:15 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0
>Nov 11 13:32:16 localhost kernel: IP Protocols: ICMP, UDP, TCP, IGMP
>Nov 11 13:32:16 localhost kernel: IP: routing cache hash table of 1024
buckets, 8Kbytes
>Nov 11 13:32:16 localhost kernel: TCP: Hash tables configured (established
8192 bind 8192)
>Nov 11 13:32:16 localhost kernel: Linux IP multicast router 0.06 plus
PIM-SM
>Nov 11 13:32:16 localhost kernel: NET4: Unix domain sockets 1.0/SMP for
Linux NET4.0.
>Nov 11 13:32:16 localhost kernel: RAMDISK: Compressed image found at block
0
>Nov 11 13:32:16 localhost kernel: Freeing initrd memory: 436k freed
>Nov 11 13:32:16 localhost kernel: VFS: Mounted root (ext2 filesystem).
>Nov 11 13:32:16 localhost kernel: SCSI subsystem driver Revision: 1.00
>Nov 11 13:32:16 localhost kernel: PCI: Found IRQ 11 for device 00:04.0
>Nov 11 13:32:16 localhost kernel: PCI: Found IRQ 11 for device 00:04.0
>Nov 11 13:32:16 localhost kernel: (scsi0) <Adaptec AIC-7860 Ultra SCSI host
adapter> found at PCI 0/4/0
>Nov 11 13:32:16 localhost kernel: (scsi0) Narrow Channel, SCSI ID=7, 3/255
SCBs
>Nov 11 13:32:16 localhost kernel: (scsi0) Cables present (Int-50 NO, Ext-50
YES)
>Nov 11 13:32:16 localhost kernel: (scsi0) Downloading sequencer code... 436
instructions downloaded
>Nov 11 13:32:16 localhost kernel: scsi0 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0
>Nov 11 13:32:16 localhost kernel:        <Adaptec AIC-7860 Ultra SCSI host
adapter>
>Nov 11 13:32:16 localhost kernel:   Vendor: ADTRON    Model: AccentSPC
M10011  Rev: 2e02
>Nov 11 13:32:16 localhost kernel:   Type:   Direct-Access
ANSI SCSI revision: 02
>Nov 11 13:32:16 localhost kernel: Attached scsi removable disk sda at
scsi0, channel 0, id 4, lun 0
>Nov 11 13:32:16 localhost kernel: (scsi0:0:4:0) Synchronous at 5.7
Mbyte/sec, offset 15.
>Nov 11 13:32:16 localhost kernel: sda : READ CAPACITY failed.
>Nov 11 13:32:16 localhost kernel: sda : status = 1, message = 00, host = 0,
driver = 28
>Nov 11 13:32:16 localhost kernel: Current sd00:00: sense key Not Ready
>Nov 11 13:32:16 localhost kernel: Additional sense indicates Medium not
present
>Nov 11 13:32:17 localhost xinetd[885]: chargen disabled, removing
>Nov 11 13:32:17 localhost kernel: sda : block size assumed to be 512 bytes,
disk size 1GB.
>Nov 11 13:32:17 localhost xinetd[885]: chargen disabled, removing
>Nov 11 13:32:17 localhost kernel:  sda: I/O error: dev 08:00, sector 0
>Nov 11 13:32:17 localhost xinetd[885]: daytime disabled, removing
>Nov 11 13:32:17 localhost kernel:  unable to read partition table
>Nov 11 13:32:17 localhost xinetd[885]: daytime disabled, removing
>Nov 11 13:32:17 localhost kernel: Journalled Block Device driver loaded
>Nov 11 13:32:17 localhost xinetd[885]: echo disabled, removing
>Nov 11 13:32:17 localhost kernel: kjournald starting.  Commit interval 5
seconds
>Nov 11 13:32:17 localhost kernel: EXT3-fs: mounted filesystem with ordered
data mode.
>Nov 11 13:32:17 localhost xinetd[885]: echo disabled, removing
>Nov 11 13:32:17 localhost kernel: Freeing unused kernel memory: 216k freed
>Nov 11 13:32:17 localhost xinetd: xinetd startup succeeded
>Nov 11 13:32:17 localhost xinetd[885]: finger disabled, removing
>Nov 11 13:32:17 localhost kernel: Adding Swap: 257000k swap-space
(priority -1)
>Nov 11 13:32:17 localhost xinetd[885]: ntalk disabled, removing
>Nov 11 13:32:17 localhost kernel: usb.c: registered new driver usbdevfs
>Nov 11 13:32:17 localhost xinetd[885]: exec disabled, removing
>Nov 11 13:32:17 localhost kernel: usb.c: registered new driver hub
>Nov 11 13:32:17 localhost xinetd[885]: login disabled, removing
>Nov 11 13:32:17 localhost kernel: usb-uhci.c: $Revision: 1.259 $ time
17:30:15 Sep  6 2001
>Nov 11 13:32:17 localhost xinetd[885]: shell disabled, removing
>Nov 11 13:32:18 localhost kernel: usb-uhci.c: High bandwidth mode enabled
>Nov 11 13:32:18 localhost xinetd[885]: rsync disabled, removing
>Nov 11 13:32:18 localhost kernel: PCI: Assigned IRQ 10 for device 00:14.2
>Nov 11 13:32:18 localhost xinetd[885]: talk disabled, removing
>Nov 11 13:32:18 localhost kernel: usb-uhci.c: USB UHCI at I/O 0x2080, IRQ
10
>Nov 11 13:32:18 localhost xinetd[885]: telnet disabled, removing
>Nov 11 13:32:18 localhost kernel: usb-uhci.c: Detected 2 ports
>Nov 11 13:32:18 localhost xinetd[885]: time disabled, removing
>Nov 11 13:32:18 localhost kernel: usb.c: new USB bus registered, assigned
bus number 1
>Nov 11 13:32:18 localhost xinetd[885]: time disabled, removing
>Nov 11 13:32:18 localhost kernel: hub.c: USB hub found
>Nov 11 13:32:18 localhost kernel: hub.c: 2 ports detected
>Nov 11 13:32:18 localhost kernel: usb-uhci.c: v1.251:USB Universal Host
Controller Interface driver
>Nov 11 13:32:18 localhost kernel: hub.c: USB new device connect on bus1/2,
assigned device number 2
>Nov 11 13:32:18 localhost kernel: usb.c: USB device 2 (vend/prod 0x565/0x1)
is not claimed by any active driver.
>Nov 11 13:32:19 localhost kernel: usbserial.c: USB Serial support
registered for Generic
>Nov 11 13:32:19 localhost kernel: usb.c: registered new driver serial
>Nov 11 13:32:19 localhost kernel: usbserial.c: USB Serial Driver core v1.3
>Nov 11 13:32:19 localhost kernel: usbserial.c: USB Serial support
registered for Belkin F5U103 USB Serial Adapter
>Nov 11 13:32:19 localhost kernel: usbserial.c: USB Serial support
registered for Belkin USB Serial Adapter
>Nov 11 13:32:19 localhost kernel: usbserial.c: USB Serial support
registered for Peracom single port USB Serial Adapter
>Nov 11 13:32:19 localhost kernel: usbserial.c: Peracom single port USB
Serial Adapter converter detected
>Nov 11 13:32:19 localhost kernel: belkin_sa.c: bcdDevice: 0108, bfc: 1
>Nov 11 13:32:19 localhost kernel: usbserial.c: Peracom single port USB
Serial Adapter converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
>Nov 11 13:32:19 localhost kernel: usbserial.c: USB Serial support
registered for GO-COM232 USB Serial Converter
>Nov 11 13:32:19 localhost xinetd[885]: xinetd Version 2.3.3 started with
libwrap options compiled in.
>Nov 11 13:32:19 localhost kernel: belkin_sa.c: v1.1:USB Belkin Serial
converter driver
>Nov 11 13:32:19 localhost xinetd[885]: Started working: 1 available service
>Nov 11 13:32:19 localhost kernel: EXT3 FS 2.4-0.9.8, 25 Aug 2001 on
ide0(3,3), internal journal
>Nov 11 13:32:19 localhost kernel: kjournald starting.  Commit interval 5
seconds
>Nov 11 13:32:20 localhost kernel: EXT3 FS 2.4-0.9.8, 25 Aug 2001 on
ide0(3,2), internal journal
>Nov 11 13:32:20 localhost kernel: EXT3-fs: mounted filesystem with ordered
data mode.
>Nov 11 13:32:20 localhost kernel: 0x378: FIFO is 16 bytes
>Nov 11 13:32:20 localhost kernel: 0x378: writeIntrThreshold is 15
>Nov 11 13:32:20 localhost kernel: 0x378: readIntrThreshold is 15
>Nov 11 13:32:20 localhost kernel: parport0: PC-style at 0x378 (0x778)
[PCSPP,TRISTATE,COMPAT,ECP]
>Nov 11 13:32:20 localhost kernel: parport0: irq 7 detected
>Nov 11 13:32:21 localhost kernel: parport0: Printer, Hewlett-Packard
OfficeJet Series 600
>Nov 11 13:32:21 localhost kernel: ip_conntrack (1024 buckets, 8192 max)
>Nov 11 13:32:21 localhost kernel: Linux Tulip driver version 0.9.15-pre6
(July 2, 2001)
>Nov 11 13:32:21 localhost kernel: PCI: Found IRQ 10 for device 00:05.0
>Nov 11 13:32:21 localhost kernel: tulip0:  EEPROM default media type
Autosense.
>Nov 11 13:32:21 localhost kernel: tulip0:  Index #0 - Media 10baseT (#0)
described by a 21142 Serial PHY (2) block.
>Nov 11 13:32:21 localhost kernel: tulip0:  Index #1 - Media 10baseT-FDX
(#4) described by a 21142 Serial PHY (2) block.
>Nov 11 13:32:21 localhost kernel: eth0: Digital DS21143 Tulip rev 65 at
0xc88b2000, 00:40:D0:07:D6:43, IRQ 10.


The card driver is being loaded and it's detecting the card, so you're ok
there.

I think the problem you are having is not with the ethernet card but your
DHCP configuration.

This is all I had to do:

add this line to rc.inet1

/sbin/dhcpcd -h cxblahblah-a

then restart inetd or the whole machine if you prefer.




>Nov 11 13:32:24 localhost sendmail: sendmail startup succeeded
>Nov 11 13:32:24 localhost gpm: gpm startup succeeded
>Nov 11 13:32:25 localhost crond: crond startup succeeded
>Nov 11 13:32:27 localhost xfs: listening on port 7100
>Nov 11 13:32:27 localhost xfs: xfs startup succeeded
>Nov 11 13:32:27 localhost anacron: anacron startup succeeded
>Nov 11 13:32:28 localhost atd: atd startup succeeded
>Nov 11 13:32:28 localhost xfs: ignoring font path element
/usr/X11R6/lib/X11/fonts/cyrillic (unreadable)
>Nov 11 13:32:28 localhost xfs: ignoring font path element
/usr/X11R6/lib/X11/fonts/local (unreadable)
>Nov 11 13:32:28 localhost rc: Starting wine:  succeeded
>Nov 11 13:32:29 localhost xfs: ignoring font path element
/usr/share/AbiSuite/fonts (unreadable)
>Nov 11 13:33:04 localhost login(pam_unix)[1062]: session opened for user
root by LOGIN(uid=0)
>Nov 11 13:33:04 localhost  -- root[1062]: ROOT LOGIN ON tty1
>
>________________________________________________
>See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't
post to the list quickly and you use Netscape to write mail.
>
>PLUG-discuss mailing list  -  PLUG-discuss@lists.PLUG.phoenix.az.us
>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss




________________________________________________
See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post
to the list quickly and you use Netscape to write mail.

PLUG-discuss mailing list  -  PLUG-discuss@lists.PLUG.phoenix.az.us
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss