Static Routing

[John Kloian III]

Cat /proc/sys/net/ipv4/ip_forward.  If there is a zero in that file it
means that IP forwarding is turned off.  If it isn't a one echo 1 >
/proc/sys/net/ip4v/ip_forward.  Also is your firewall doing NAT for the
192.168.1.x network?

-- 
/****************************************************************************/
/                                                                            /
/  John Kloian III                                 Chief Technology Officer  /
/  OpNIX, Inc.                                             http://opnix.com  /
/                                                                            /
/                     .Innovating Internet Intelligence.                     /
/                                                                            /
/****************************************************************************/

On Wed, 11 Apr 2001, David Demland wrote:

>I am having a problem with setting up static routing on a new firewall.
>There are three NICs in the firewall. Two of them are setup with internal
>Class C addresses of 192.168.1.204 (eth2) and 192.168.1.79 (eth1). The third
>NIC has a Class A address of 10.0.1.1 (eth0). The default gateway is
>10.0.1.2 from the third NIC (eth0). I need to get packets sent to
>192.168.1.204 routed to 10.0.1.2 out the 10.0.1.1. Then I need to route
>packets sent to 192.168.1.79 to 10.0.1.3 through the eth0 NIC was well.
>
>I have tried everything with the route command and only get error message of
>unknown host or network. What am I doing wrong?
>
>Here is the picture:
>
>
>   192.168.1.204                                       10.0.1.2 and 10.0.1.3
>                    -----------------                 ----------------------
>-
>------------------> |               |                 |
>|
>                    |               |    10.0.1.1     |
>|
>   192.168.1.79     |   Firewall    |  -------------> |       Router
>|
>                    |               |                 |
>|
>------------------> |               |                 |
>|
>                    -----------------                 ----------------------
>-
>
>Thank You,
>
>David Demland
>Qa/Process Manager
>CADTEL Systems, Inc.
>11201 N. Tatum Ste. 200
>Phoenix, AZ 85028
>(602) 648-6054
>Fax: (602) 953-4833
>ddemland@cadtel.com
>
>________________________________________________
>See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.
>
>PLUG-discuss mailing list  -  PLUG-discuss@lists.PLUG.phoenix.az.us
>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>