Static Routing

[David Demland]

I am having a problem with setting up static routing on a new firewall.
There are three NICs in the firewall. Two of them are setup with internal
Class C addresses of 192.168.1.204 (eth2) and 192.168.1.79 (eth1). The third
NIC has a Class A address of 10.0.1.1 (eth0). The default gateway is
10.0.1.2 from the third NIC (eth0). I need to get packets sent to
192.168.1.204 routed to 10.0.1.2 out the 10.0.1.1. Then I need to route
packets sent to 192.168.1.79 to 10.0.1.3 through the eth0 NIC was well.

I have tried everything with the route command and only get error message of
unknown host or network. What am I doing wrong?

Here is the picture:


   192.168.1.204                                       10.0.1.2 and 10.0.1.3
                    -----------------                 ----------------------
-
------------------> |               |                 |
|
                    |               |    10.0.1.1     |
|
   192.168.1.79     |   Firewall    |  -------------> |       Router
|
                    |               |                 |
|
------------------> |               |                 |
|
                    -----------------                 ----------------------
-

Thank You,

David Demland
Qa/Process Manager
CADTEL Systems, Inc.
11201 N. Tatum Ste. 200
Phoenix, AZ 85028
(602) 648-6054
Fax: (602) 953-4833
ddemland@cadtel.com