Re: computer slow

>>> nope.... that did not seem to do anything:
>>> bmike1@MikesBeast ~ $ modprobe k10temp
>>> bmike1@MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1:        +66.0°C

>>> it8718-isa-0228
>>> Adapter: ISA adapter
>>> in0:          +1.46 V  (min =  +0.00 V, max =  +4.08 V)
>>> in1:          +1.94 V  (min =  +0.00 V, max =  +4.08 V)
>>> in2:          +3.25 V  (min =  +0.00 V, max =  +4.08 V)
>>> +5V:          +2.99 V  (min =  +0.00 V, max =  +4.08 V)
>>> in4:          +3.10 V  (min =  +0.00 V, max =  +4.08 V)
>>> in5:          +3.25 V  (min =  +0.00 V, max =  +4.08 V)
>>> in6:          +4.08 V  (min =  +0.00 V, max =  +4.08 V)
>>> in7:          +2.35 V  (min =  +0.00 V, max =  +4.08 V)
>>> Vbat:         +3.15 V
>>> fan1:        3139 RPM  (min =    0 RPM)
>>> fan2:           0 RPM  (min =    0 RPM)
>>> fan3:           0 RPM  (min =    0 RPM)
>>> fan5:           0 RPM  (min =    0 RPM)
>>> temp1:        +35.0°C  (low  = +127.0°C, high = +127.0°C)  sensor =
>>> thermistor
>>> temp2:        +51.0°C  (low  = +127.0°C, high = +127.0°C)  sensor =
>>> thermal diode
>>> temp3:        +52.0°C  (low  = +127.0°C, high = +127.0°C)  sensor =
>>> thermistor
>>> cpu0_vid:    +1.050 V
>>> intrusion0:  ALARM

>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1:        +48.8°C  (high = +70.0°C)
>>>                        (crit = +72.0°C, hyst = +70.0°C)

>>>>> it is there:
>>>>>> $ modinfo k10temp
>>>>>> filename:       /lib/modules/4.4.0-53-generic/kernel/drivers/hwmon/
>>>>>> k10temp.ko
>>>>>> license:        GPL
>>>>>> author:         Clemens Ladisch <clemens@ladisch.de>
>>>>>> description:    AMD Family 10h+ CPU core temperature monitor
>>>>>> srcversion:     4BBE5D56D6917F9D3D415AA
>>>>>> alias:          pci:v00001022d00001583sv*sd*bc*sc*i*
>>>>>> alias:          pci:v00001022d00001533sv*sd*bc*sc*i*
>>>>>> alias:          pci:v00001022d00001573sv*sd*bc*sc*i*
>>>>>> alias:          pci:v00001022d0000141Dsv*sd*bc*sc*i*
>>>>>> alias:          pci:v00001022d00001403sv*sd*bc*sc*i*
>>>>>> alias:          pci:v00001022d00001603sv*sd*bc*sc*i*
>>>>>> alias:          pci:v00001022d00001703sv*sd*bc*sc*i*
>>>>>> alias:          pci:v00001022d00001303sv*sd*bc*sc*i*
>>>>>> alias:          pci:v00001022d00001203sv*sd*bc*sc*i*
>>>>>> depends:
>>>>>> intree:         Y
>>>>>> vermagic:       4.4.0-53-generic SMP mod_unload modversions
>>>>>> parm:           force:force loading on processors with erratum 319
>>>>>> (bool)

>>>>>>>> $ lscpu
>>>>>>>> Architecture:          x86_64
>>>>>>>> CPU op-mode(s):        32-bit, 64-bit
>>>>>>>> Byte Order:            Little Endian
>>>>>>>> CPU(s):                4
>>>>>>>> On-line CPU(s) list:   0-3
>>>>>>>> Thread(s) per core:    1
>>>>>>>> Core(s) per socket:    4
>>>>>>>> Socket(s):             1
>>>>>>>> NUMA node(s):          1
>>>>>>>> Vendor ID:             AuthenticAMD
>>>>>>>> CPU family:            16
>>>>>>>> Model:                 5
>>>>>>>> Model name:            AMD Athlon(tm) II X4 620 Processor
>>>>>>>> Stepping:              2
>>>>>>>> CPU MHz:               1400.000
>>>>>>>> CPU max MHz:           2600.0000
>>>>>>>> CPU min MHz:           800.0000
>>>>>>>> BogoMIPS:              5223.39
>>>>>>>> Virtualization:        AMD-V
>>>>>>>> L1d cache:             64K
>>>>>>>> L1i cache:             64K
>>>>>>>> L2 cache:              512K
>>>>>>>> NUMA node0 CPU(s):     0-3
>>>>>>>> Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep
>>>>>>>> mtrr
>>>>>>>> pge
>>>>>>>> mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
>>>>>>>> fxsr_opt
>>>>>>>> pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
>>>>>>>> nonstop_tsc
>>>>>>>> extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic
>>>>>>>> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
>>>>>>>> hw_pstate vmmcall npt lbrv svm_lock nrip_save