PfSense + ubiquity

[Snyder, Alexander J]

I got it working.

I assigned the SFP+ port as my LAN and assigned it the 10.x.x.x/16 network.
Then I had to call COX and list the WAN Mac address with them. Upon doing
so I was able to reach external sites, and all downstream devices started
coming alive!

Thanks for all the suggestions and help!

Thanks,
Alexander

Sent from my Galaxy S10+

On Sun, May 3, 2020, 03:14 Herminio Hernandez, Jr. via PLUG-discuss <
plug-discuss at lists.phxlinux.org> wrote:

> Can you  login to the FW via the LAN interface? Can you  ping the FW LAN
> interface? Check the routing and NAT policy on the FW. All outbound traffic
> should NAT to the FW WAN interface and there should be a default (
> 0.0.0.0/0) route to the internet.
>
> On Sat, May 2, 2020 at 7:27 PM Seabass via PLUG-discuss <
> plug-discuss at lists.phxlinux.org> wrote:
>
>> I'm with Mac, I think it is not the firewall, but if you have the ability
>> to plug it into a display with a keyboard, you can use that for
>> configuration and modify a different device at the same time.
>>
>> Makes it easier to troubleshoot by giving you the ability to configure
>> your pfSense ports at the same time.
>>
>>
>>
>> Message: 2
>> Date: Sat, 2 May 2020 09:04:35 -0700
>> From: Donald Mac McCarthy <mac at oscontext.com>
>> To: "Snyder, Alexander J via PLUG-discuss"
>> <plug-discuss at lists.phxlinux.org>
>> Subject: Re: pfSense + Ubiquity
>> Message-ID: <18adfa38-3e72-7b0a-e31a-1ddf175d717f at oscontext.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> I can help - but I am unavailable to do so until tomorrow.
>>
>> Make sure there are not any thing other than default VLANs on the
>> interfaces to start with. Ubiquiti is famous for not havinght eSFP+
>> ports active in the default configuration, and I believe the switch has
>> all the ports to shutdown on default config as well.
>>
>> I think it is the switch not passing traffic through - no the firewall.
>>
>> Mac
>> Snyder, Alexander J via PLUG-discuss wrote on 5/2/20 8:53 AM:
>> > Does anyone out there have experience with pfSence and Ubiquity
>> switches?
>> >
>> > I have zero with either but that didn't stop me from buying both ....
>> > how hard could it be?! LOL.
>> >
>> > I bought a Negate XG-1537-1U. I bought a Unifi Pro 24 PoE switch.
>> >
>> > I can configure the FW immediately after
>> > firstboot/restore-default-configs, but only if i set the LAN interface
>> > to be the cable that goes directly to my laptop. That's great, but
>> > that does shit for the downstream switch.
>> >
>> > I have a 10GB SFP+ Port that I want to configure as the downstream
>> > port to ubiquity, but any configuration other than mentioned above
>> > fails .... and I'm now on my 12th "Reset To Factory Defaults" ... any
>> > help on this would be greatly appreciated!
>> >
>> > Thanks,
>> > Alexander
>> >
>> > Sent from my Galaxy S10+
>> >
>> >
>> > ---------------------------------------------------
>> > PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> > To subscribe, unsubscribe, or to change your mail settings:
>> > https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>> --
>> Donald "Mac" McCarthy
>> Director, Field Operations
>> Open Source Context
>> +1.602.584.4445
>> mac at oscontext.com
>> https://oscontext.com
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20200502/aeab14b4/attachment-0001.html
>> >
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>>
>> ------------------------------
>>
>> End of PLUG-discuss Digest, Vol 179, Issue 2
>> ********************************************
>>
>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20200503/2c273435/attachment.html>