System building trouble

[Nadim Hoque]

This might be a bit dangerous, but have you tried shorting the pins on the motherboard for the power button. Also did you also make sure you have the cpu power connected? I remember I only had the motherboard power  and not the cpu power and my system did not. 

Nadim

> On Jul 30, 2019, at 08:36, Harold Hartley <wheelie207 at ownmail.net> wrote:
> 
> Ok, but still there has to be a max watt on the board just the same. What is the specs of the gpu wattage and power draw.
> 
>> On Tue, Jul 30, 2019, at 08:33, Stephen Partington wrote:
>> This is only relevant based on the amount of power drawn by the CPU socket really.
>> 
>> On Tue, Jul 30, 2019 at 8:11 AM Harold Hartley <wheelie207 at ownmail.net> wrote:
>> > __
>> > Has anyone check out what the maximum watts of power that the motherboard can actually handle. 
>> > Some time ago I had a motherboard and got a nice high wattage power supply only to find out it would not run. The psu was to much for the board. I then learned that it was rated at a max watt that was less than the psu.
>> > 
>> > On Tue, Jul 30, 2019, at 08:03, Bob Elzer wrote:
>> >> That seems to be enough, I wish you had access to an 850w to try it.
>> >> 
>> >> My only other thought would be to check to make sure the cooler fan is plugged in correctly and that it is plugged into the correct fan header. I think some motherboards won't boot if a fan isn't detected.
>> >> 
>> >> 
>> >> 
>> >> On Tue, Jul 30, 2019, 1:29 AM Eric Oyen <eric.oyen at icloud.com> wrote:
>> >> > It could be infancy failure of the board, or GPU or CPU. The board is most likely suspect if the supply works otherwise.
>> >> > 
>> >> > -Eric
>> >> > From the central offices of the Technomage Guild, Parts is parts Dept.
>> >> > 
>> >> > > On Jul 29, 2019, at 11:09 PM, Adam Mercer <ramercer at gmail.com> wrote:
>> >> > > 
>> >> > > On Mon, Jul 29, 2019 at 9:24 PM Bob Elzer <bob.elzer at gmail.com> wrote:
>> >> > > 
>> >> > >> You could go to PCPartPicker and build a system with all your exact parts and see if it gives you a warning about the wattage
>> >> > > 
>> >> > > I used PCPartPicker to assemble the list and check compatibility. That
>> >> > > gave me a power usage of just shy of about 370W so I doubled that and
>> >> > > selected a 750W to be on the safe side.
>> >> > > 
>> >> > >> You could also list your parts here too. Did you get a x570 Mb? I hear those draw more power too.
>> >> > > 
>> >> > > It is a x570 board. It's a beast with a lot of upgrade potential.
>> >> > > 
>> >> > > The parts list is here:
>> >> > > 
>> >> > > https://pcpartpicker.com/user/skymoo/saved/gtVdXL
>> >> > > 
>> >> > > Cheers
>> >> > > 
>> >> > > Adam
>> >> > > ---------------------------------------------------
>> >> > > PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> >> > > To subscribe, unsubscribe, or to change your mail settings:
>> >> > > https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>> >> > 
>> >> > ---------------------------------------------------
>> >> > PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> >> > To subscribe, unsubscribe, or to change your mail settings:
>> >> > https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>> >> ---------------------------------------------------
>> >> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> >> To subscribe, unsubscribe, or to change your mail settings:
>> >> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>> > 
>> > --
>> >  Harold Hartley
>> >  17632 N. 5th place
>> >  Phoenix, AZ 85022
>> > wheelie207 at ownmail.net
>> > 
>> > 
>> > ---------------------------------------------------
>> >  PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> >  To subscribe, unsubscribe, or to change your mail settings:
>> > https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>> 
>> 
>> -- 
>> A mouse trap, placed on top of your alarm clock, will prevent you from rolling over and going back to sleep after you hit the snooze button.
>> 
>> Stephen
>> 
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
> 
> --
>   Harold Hartley
>   17632 N. 5th place
>   Phoenix, AZ 85022
>   wheelie207 at ownmail.net
> 
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20190730/7f56edcc/attachment.html>