rsync

[Michael]

:/
 ~ $ sudo fsck -f /dev/sda1
fsck from util-linux 2.27.1
 ~ $ sudo fsck -f /dev/sda
fsck from util-linux 2.27.1
e2fsck 1.42.13 (17-May-2015)
ext2fs_open2: Bad magic number in super-block
fsck.ext2: Superblock invalid, trying backup blocks...
fsck.ext2: Bad magic number in super-block while trying to open /dev/sda

The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem.  If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>
 or
    e2fsck -b 32768 <device>

gparted says the device is on sda1

On Fri, Sep 22, 2017 at 12:14 PM, Carruth, Rusty <Rusty.Carruth at smartm.com>
wrote:

> Try fsck –f (for force).  If the filesystem is marked clean and some other
> stuff it won’t run the test, IIRC.
>
>
>
> *From:* PLUG-discuss [mailto:plug-discuss-bounces at lists.phxlinux.org] *On
> Behalf Of *Michael
> *Sent:* Friday, September 22, 2017 5:15 AM
> *To:* Main PLUG discussion list
> *Subject:* Re: rsync
>
>
>
> $ sudo fsck /dev/sdc1
>
> fsck from util-linux 2.27.1
>
> $
>
>
>
> isn't it supposed to give a code of some sort?
>
> Here is a mall snippet of the errors it gives when trying to rsync to the
> drive:
>
>
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46403032.ini")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46403576.xml")
> failed: Input/output error (5)
>
>
>
> here is a snippet of the errors I get when trying to  delete the file
> recovery directory:
>
>
>
> rm: cannot remove 'file recovery/recup_dir.465/f46401688.xml.gz':
> Input/output error
>
> rm: cannot remove 'file recovery/recup_dir.465/f46401920.xml.gz':
> Input/output error
>
>
>
> any ideas how I can delete  them?
>
>
>
>
>
> On Thu, Sep 7, 2017 at 5:36 PM, James Dugger <james.dugger at gmail.com>
> wrote:
>
> You potentially have corrupt files or problems with your disk. Use the
> fsck command to check files/file system and smartctl command to check the
> disk
>
>
>
> On Sep 7, 2017 4:52 AM, "Michael" <bmike1 at gmail.com> wrote:
>
> I get the following errors. How do I stop it?
>
> $ rsync -aWuq --delete-before /home/bmike1/Documents
> /media/bmike1/"Seagate Expansion Drive"
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46038464.elf")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46285928.txt")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46399616.bz2")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46399920.xml")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46400256.bz2")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46400560_tooltip.svg.gz")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/
> f46400824_analog_meter.svg.gz") failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/
> f46401072_extender-background.svg.gz") failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46401488.xml.gz")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46401688.xml.gz")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46401920.xml.gz")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46402208.xml.gz")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46402688.png")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46403032.ini")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46403576.xml")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46404144.xml")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46404624.xml")
> failed: Input/output error (5)
>
> rsync: readlink_stat("/media/bmike1/Seagate Expansion
> Drive/Documents/Programs/file recovery/recup_dir.465/f46405344.xml")
> failed: Input/output error (5)
>
> rsync error: some files/attrs were not transferred (see previous errors)
> (code 23) at main.c(1183) [sender=3.1.1]
>
>
>
> --
>
> :-)~MIKE~(-:
>
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
>
>
>
>
> --
>
> :-)~MIKE~(-:
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>



-- 
:-)~MIKE~(-:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20170922/7184c2a9/attachment.html>