netis wf2118
Michael Butash
michael at butash.net
Thu Aug 24 14:23:37 MST 2017
Need to make sure the system sees it as a usable network device. Do:
iwconfig ## verifies if the system sees it as a proper 802.11 device,
and/or ap association
ip link ## sees the nic as a real interface
ip addr ## shows ip layer data, if it has an address
cat /var/log/syslog | grep NetworkManager ## verfies if network-manager is
trying to do anything with it
Also, does the systray applet show the network scanning for any wifi
devices? You should see *some* ssid's being found.
-mb
On Thu, Aug 24, 2017 at 1:45 PM, Michael <bmike1 at gmail.com> wrote:
> or more as it is being detected just not transmitting data. what should I
> do?
>
> On Thu, Aug 24, 2017 at 4:34 PM, Michael <bmike1 at gmail.com> wrote:
>
>> lspci sees SOMETHING at least. It says
>> 03:00.0 Network controller: Ralink corp. RT5362 PCI 802.11n Wireless
>> Network Adapter
>>
>> so it is detected.
>>
>> The card in the other computer is almost identical It is pci-e wile the
>> one not being detected is a pci card.
>>
>> On Thu, Aug 24, 2017 at 4:17 PM, Michael Butash <michael at butash.net>
>> wrote:
>>
>>> Look at the pci devices with lspci, grep for network devices:
>>>
>>> >> lspci | grep Network
>>> >> 02:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac
>>> Wireless Network Adapter (rev 32)
>>>
>>> You should see a like device there, your new card. If it's not being
>>> detected properly, search dmesg output looking for an unknown device, might
>>> be a firmware thing or something. Dmesg should at least tell you what
>>> pci-id, vendor, or model of chip to then google why that doesn't load under
>>> your os.
>>>
>>> -mb
>>>
>>>
>>> On Wed, Aug 23, 2017 at 4:30 PM, Michael <bmike1 at gmail.com> wrote:
>>>
>>>> I got two wireless cards (netis wf2118) for two computers. both
>>>> computers have mint. One card is pci the other pci-e. the pci-e card works
>>>> great. the pci not so much. the green connectivity light on the pci card is
>>>> happily a solid green. Any ideas on how to get it to work?....
>>>>
>>>> I just googled it and the one hit I got said he had a dead card. How
>>>> can I tell if it is dead?
>>>>
>>>> --
>>>> :-)~MIKE~(-:
>>>>
>>>> ---------------------------------------------------
>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>
>>>
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>
>>
>>
>> --
>> :-)~MIKE~(-:
>>
>
>
>
> --
> :-)~MIKE~(-:
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20170824/302cf9e2/attachment.html>
More information about the PLUG-discuss
mailing list