Rsync ran like 30-40 minutes

Brian Cluff brian at snaptek.com
Sat Apr 29 19:18:03 MST 2017 

You should be able to use those.  Usually it just means that it will physically look similar to Apple equipment.
Just make sure that it's got a USB and not lighting out other type of connector that you don't have.

Brian Cluff

On April 29, 2017 6:44:52 PM MST, Michael <bmike1 at gmail.com> wrote:
>okay... this means I'm now in the market for an external drive. I'm
>looking
>through amazon and run across drives that support mac. can I get those?
>
>On Sat, Apr 29, 2017 at 5:39 PM, Brian Cluff <brian at snaptek.com> wrote:
>
>> Sounds like your drive may have developed some bad blocks and
>formatting
>> it caused it to recover... but I wouldn't use that drive for backups
>> anymore because it's dying and it's only a matter of a short amount
>of time
>> before it fails and you loose everything.   In fact, I wouldn't use a
>thumb
>> drive for backups at all.  They aren't designed to be written to in
>bulk
>> over and over like you are trying to do and they will fail quickly. 
>Get
>> yourself a good external drive.   You should go with a regular
>spinning
>> drive as there are no advantages to backing up to flash over USB.  A
>flash
>> drive will fail a lot more quickly than a spinning drive with the way
>you
>> are using them though.  You'll also get a whole lot more space on a
>hard
>> disk drive so you can alter your backup procedure to keep multiple
>> versions.
>>
>> Brian Cluff
>>
>>
>> On 04/29/2017 05:49 AM, Michael wrote:
>>
>> it is going very slowly though for some of the files.
>>
>> On Sat, Apr 29, 2017 at 8:37 AM, Michael <bmike1 at gmail.com> wrote:
>>
>>> well.... I format the drive and things are transferring now.
>>>
>>> On Fri, Apr 28, 2017 at 8:15 PM, Michael <bmike1 at gmail.com> wrote:
>>>
>>>> I think I fried it in my glove compartment.
>>>>
>>>> On Fri, Apr 28, 2017 at 8:14 PM, Michael <bmike1 at gmail.com> wrote:
>>>>
>>>>> $ sudo fsck /dev/sdd
>>>>> [sudo] password for bmike1:
>>>>> fsck from util-linux 2.20.1
>>>>> e2fsck 1.42.9 (4-Feb-2014)
>>>>> fsck.ext2: No medium found while trying to open /dev/sdd
>>>>>
>>>>> The superblock could not be read or does not describe a valid
>>>>> ext2/ext3/ext4
>>>>> filesystem.  If the device is valid and it really contains an
>>>>> ext2/ext3/ext4
>>>>> filesystem (and not swap or ufs or something else), then the
>superblock
>>>>> is corrupt, and you might try running e2fsck with an alternate
>>>>> superblock:
>>>>>     e2fsck -b 8193 <device>
>>>>>  or
>>>>>     e2fsck -b 32768 <device>
>>>>> <mount device>
>>>>> bmike1 at MikesBeast ~ $ sudo fsck /dev/sdd
>>>>> fsck from util-linux 2.20.1
>>>>> e2fsck 1.42.9 (4-Feb-2014)
>>>>> /dev/sdd is in use.
>>>>> e2fsck: Cannot continue, aborting.
>>>>>
>>>>>
>>>>> On Fri, Apr 28, 2017 at 7:50 PM, Michael <bmike1 at gmail.com> wrote:
>>>>>
>>>>>> $ sudo fsck /media/bmike1/GORILLA64
>>>>>> [sudo] password for bmike1:
>>>>>> fsck from util-linux 2.20.1
>>>>>> e2fsck 1.42.9 (4-Feb-2014)
>>>>>> fsck.ext2: Is a directory while trying to open
>/media/bmike1/GORILLA64
>>>>>>
>>>>>> The superblock could not be read or does not describe a valid
>>>>>> ext2/ext3/ext4
>>>>>> filesystem.  If the device is valid and it really contains an
>>>>>> ext2/ext3/ext4
>>>>>> filesystem (and not swap or ufs or something else), then the
>superblock
>>>>>> is corrupt, and you might try running e2fsck with an alternate
>>>>>> superblock:
>>>>>>     e2fsck -b 8193 <device>
>>>>>>  or
>>>>>>     e2fsck -b 32768 <device>
>>>>>>  $ sudo fsck /dev/sdd1
>>>>>> fsck from util-linux 2.20.1
>>>>>> fsck.fat 3.0.26 (2014-03-07)
>>>>>> 0x41: Dirty bit is set. Fs was not properly unmounted and some
>data
>>>>>> may be corrupt.
>>>>>> 1) Remove dirty bit
>>>>>> 2) No action
>>>>>> ? ^C
>>>>>> <unmount device>
>>>>>> bmike1 at MikesBeast ~ $ sudo fsck /dev/sdd1
>>>>>> fsck from util-linux 2.20.1
>>>>>> e2fsck 1.42.9 (4-Feb-2014)
>>>>>> fsck.ext2: No such file or directory while trying to open
>/dev/sdd1
>>>>>> Possibly non-existent device?
>>>>>>
>>>>>>
>>>>>> On Fri, Apr 28, 2017 at 7:43 PM, Carruth, Rusty <
>>>>>> Rusty.Carruth at smartm.com> wrote:
>>>>>>
>>>>>>> What does fsck say?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *From:* PLUG-discuss
>[mailto:plug-discuss-bounces at lists.phxlinux.org]
>>>>>>> *On Behalf Of *Michael
>>>>>>> *Sent:* Friday, April 28, 2017 4:41 PM
>>>>>>> *To:* PLUG
>>>>>>> *Subject:* Rsync ran like 30-40 minutes
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> this is what happened in that time:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>  $ rsync -aWuq --delete-before --progress /home/bmike1/Documents
>>>>>>> /media/bmike1/GORILLA64
>>>>>>>
>>>>>>> ^C
>>>>>>>
>>>>>>> rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>>>> rsync.c(632) [sender=3.1.0]
>>>>>>>
>>>>>>> rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>>>> io.c(521) [generator=3.1.0]
>>>>>>>
>>>>>>>  $
>>>>>>>
>>>>>>> I then removed the quiet flag and:
>>>>>>>
>>>>>>>  $ rsync -aWu --delete-before --progress /home/bmike1/Documents
>>>>>>> /media/bmike1/GORILLA64
>>>>>>>
>>>>>>> building file list ...
>>>>>>>
>>>>>>> 63787 files to consider
>>>>>>>
>>>>>>> deleting
>Documents/Business/Photography/PropertyPhotographing/PrivateClients/Alliya
>>>>>>> Maqsood/2016/2016101020/8230 Dames point crossing Blvd #802
>Jacksonville
>>>>>>> 32277
>>>>>>>
>>>>>>> deleting
>Documents/Programs/darktable-2.0.6/src/common/.profiling.h.Y
>>>>>>> hVpro
>>>>>>>
>>>>>>> Documents/
>>>>>>>
>>>>>>> <truncate)
>>>>>>>
>>>>>>> hangs at:
>>>>>>>
>>>>>>> Documents/Programs/darktable-2.0.6/src/control/jobs.c
>>>>>>>
>>>>>>> ^Crsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>>>> rsync.c(632) [sender=3.1.0]
>>>>>>>
>>>>>>> rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>>>> io.c(521) [generator=3.1.0]
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> So I run again and:
>>>>>>>
>>>>>>> rsync -aWu --delete-before --progress /home/bmike1/Documents
>>>>>>> /media/bmike1/GORILLA64
>>>>>>>
>>>>>>> building file list ...
>>>>>>>
>>>>>>> 63787 files to consider
>>>>>>>
>>>>>>> rsync: [generator] write error: Broken pipe (32)
>>>>>>>
>>>>>>> ^Crsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>>>> rsync.c(632) [sender=3.1.0]
>>>>>>>
>>>>>>> rsync: [sender] write error: Broken pipe (32)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> and again:
>>>>>>>
>>>>>>> $ rsync -aWu --delete-before --progress /home/bmike1/Documents
>>>>>>> /media/bmike1/GORILLA64
>>>>>>>
>>>>>>> building file list ...
>>>>>>>
>>>>>>> 63787 files to consider
>>>>>>>
>>>>>>> Documents/
>>>>>>>
>>>>>>> <truncate>
>>>>>>>
>>>>>>> this time it hung at :
>>>>>>>
>>>>>>> Documents/Programs/hugin-2016.2.0/mac/Applications.xcodeproj
>>>>>>> /project.pbxproj
>>>>>>>
>>>>>>>          32,768  15%    0.00kB/s    0:00:00  ^X^C
>>>>>>>
>>>>>>> rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>>>> rsync.c(632) [sender=3.1.0]
>>>>>>>
>>>>>>> rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>>>> io.c(521) [generator=3.1.0]
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I'm thinking this flash drive got fried in the glove compartment
>of
>>>>>>> my car. What do you think?
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>> :-)~MIKE~(-:
>>>>>>>
>>>>>>> ---------------------------------------------------
>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> :-)~MIKE~(-:
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> :-)~MIKE~(-:
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> :-)~MIKE~(-:
>>>>
>>>
>>>
>>>
>>> --
>>> :-)~MIKE~(-:
>>>
>>
>>
>>
>> --
>> :-)~MIKE~(-:
>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail
>settings:http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>
>
>
>-- 
>:-)~MIKE~(-:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20170429/cdbb75af/attachment.html>

More information about the PLUG-discuss mailing list