Rsync ran like 30-40 minutes

[Michael]

it is going very slowly though for some of the files.

On Sat, Apr 29, 2017 at 8:37 AM, Michael <bmike1 at gmail.com> wrote:

> well.... I format the drive and things are transferring now.
>
> On Fri, Apr 28, 2017 at 8:15 PM, Michael <bmike1 at gmail.com> wrote:
>
>> I think I fried it in my glove compartment.
>>
>> On Fri, Apr 28, 2017 at 8:14 PM, Michael <bmike1 at gmail.com> wrote:
>>
>>> $ sudo fsck /dev/sdd
>>> [sudo] password for bmike1:
>>> fsck from util-linux 2.20.1
>>> e2fsck 1.42.9 (4-Feb-2014)
>>> fsck.ext2: No medium found while trying to open /dev/sdd
>>>
>>> The superblock could not be read or does not describe a valid
>>> ext2/ext3/ext4
>>> filesystem.  If the device is valid and it really contains an
>>> ext2/ext3/ext4
>>> filesystem (and not swap or ufs or something else), then the superblock
>>> is corrupt, and you might try running e2fsck with an alternate
>>> superblock:
>>>     e2fsck -b 8193 <device>
>>>  or
>>>     e2fsck -b 32768 <device>
>>> <mount device>
>>> bmike1 at MikesBeast ~ $ sudo fsck /dev/sdd
>>> fsck from util-linux 2.20.1
>>> e2fsck 1.42.9 (4-Feb-2014)
>>> /dev/sdd is in use.
>>> e2fsck: Cannot continue, aborting.
>>>
>>>
>>> On Fri, Apr 28, 2017 at 7:50 PM, Michael <bmike1 at gmail.com> wrote:
>>>
>>>> $ sudo fsck /media/bmike1/GORILLA64
>>>> [sudo] password for bmike1:
>>>> fsck from util-linux 2.20.1
>>>> e2fsck 1.42.9 (4-Feb-2014)
>>>> fsck.ext2: Is a directory while trying to open /media/bmike1/GORILLA64
>>>>
>>>> The superblock could not be read or does not describe a valid
>>>> ext2/ext3/ext4
>>>> filesystem.  If the device is valid and it really contains an
>>>> ext2/ext3/ext4
>>>> filesystem (and not swap or ufs or something else), then the superblock
>>>> is corrupt, and you might try running e2fsck with an alternate
>>>> superblock:
>>>>     e2fsck -b 8193 <device>
>>>>  or
>>>>     e2fsck -b 32768 <device>
>>>>  $ sudo fsck /dev/sdd1
>>>> fsck from util-linux 2.20.1
>>>> fsck.fat 3.0.26 (2014-03-07)
>>>> 0x41: Dirty bit is set. Fs was not properly unmounted and some data may
>>>> be corrupt.
>>>> 1) Remove dirty bit
>>>> 2) No action
>>>> ? ^C
>>>> <unmount device>
>>>> bmike1 at MikesBeast ~ $ sudo fsck /dev/sdd1
>>>> fsck from util-linux 2.20.1
>>>> e2fsck 1.42.9 (4-Feb-2014)
>>>> fsck.ext2: No such file or directory while trying to open /dev/sdd1
>>>> Possibly non-existent device?
>>>>
>>>>
>>>> On Fri, Apr 28, 2017 at 7:43 PM, Carruth, Rusty <
>>>> Rusty.Carruth at smartm.com> wrote:
>>>>
>>>>> What does fsck say?
>>>>>
>>>>>
>>>>>
>>>>> *From:* PLUG-discuss [mailto:plug-discuss-bounces at lists.phxlinux.org] *On
>>>>> Behalf Of *Michael
>>>>> *Sent:* Friday, April 28, 2017 4:41 PM
>>>>> *To:* PLUG
>>>>> *Subject:* Rsync ran like 30-40 minutes
>>>>>
>>>>>
>>>>>
>>>>> this is what happened in that time:
>>>>>
>>>>>
>>>>>
>>>>>  $ rsync -aWuq --delete-before --progress /home/bmike1/Documents
>>>>> /media/bmike1/GORILLA64
>>>>>
>>>>> ^C
>>>>>
>>>>> rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>> rsync.c(632) [sender=3.1.0]
>>>>>
>>>>> rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>> io.c(521) [generator=3.1.0]
>>>>>
>>>>>  $
>>>>>
>>>>> I then removed the quiet flag and:
>>>>>
>>>>>  $ rsync -aWu --delete-before --progress /home/bmike1/Documents
>>>>> /media/bmike1/GORILLA64
>>>>>
>>>>> building file list ...
>>>>>
>>>>> 63787 files to consider
>>>>>
>>>>> deleting Documents/Business/Photography/PropertyPhotographing/PrivateClients/Alliya
>>>>> Maqsood/2016/2016101020/8230 Dames point crossing Blvd #802 Jacksonville
>>>>> 32277
>>>>>
>>>>> deleting Documents/Programs/darktable-2.0.6/src/common/.profiling.h.Y
>>>>> hVpro
>>>>>
>>>>> Documents/
>>>>>
>>>>> <truncate)
>>>>>
>>>>> hangs at:
>>>>>
>>>>> Documents/Programs/darktable-2.0.6/src/control/jobs.c
>>>>>
>>>>> ^Crsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>> rsync.c(632) [sender=3.1.0]
>>>>>
>>>>> rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>> io.c(521) [generator=3.1.0]
>>>>>
>>>>>
>>>>>
>>>>> So I run again and:
>>>>>
>>>>> rsync -aWu --delete-before --progress /home/bmike1/Documents
>>>>> /media/bmike1/GORILLA64
>>>>>
>>>>> building file list ...
>>>>>
>>>>> 63787 files to consider
>>>>>
>>>>> rsync: [generator] write error: Broken pipe (32)
>>>>>
>>>>> ^Crsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>> rsync.c(632) [sender=3.1.0]
>>>>>
>>>>> rsync: [sender] write error: Broken pipe (32)
>>>>>
>>>>>
>>>>>
>>>>> and again:
>>>>>
>>>>> $ rsync -aWu --delete-before --progress /home/bmike1/Documents
>>>>> /media/bmike1/GORILLA64
>>>>>
>>>>> building file list ...
>>>>>
>>>>> 63787 files to consider
>>>>>
>>>>> Documents/
>>>>>
>>>>> <truncate>
>>>>>
>>>>> this time it hung at :
>>>>>
>>>>> Documents/Programs/hugin-2016.2.0/mac/Applications.xcodeproj
>>>>> /project.pbxproj
>>>>>
>>>>>          32,768  15%    0.00kB/s    0:00:00  ^X^C
>>>>>
>>>>> rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>> rsync.c(632) [sender=3.1.0]
>>>>>
>>>>> rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at
>>>>> io.c(521) [generator=3.1.0]
>>>>>
>>>>>
>>>>>
>>>>> I'm thinking this flash drive got fried in the glove compartment of my
>>>>> car. What do you think?
>>>>>
>>>>> --
>>>>>
>>>>> :-)~MIKE~(-:
>>>>>
>>>>> ---------------------------------------------------
>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> :-)~MIKE~(-:
>>>>
>>>
>>>
>>>
>>> --
>>> :-)~MIKE~(-:
>>>
>>
>>
>>
>> --
>> :-)~MIKE~(-:
>>
>
>
>
> --
> :-)~MIKE~(-:
>



-- 
:-)~MIKE~(-:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20170429/5bfb9a8c/attachment.html>