change name
Mike Ballon
mike.ballon at gmail.com
Tue May 6 11:51:35 MST 2014
unplug/plug, it should automount, if not check:
$ /etc/init.d/autofs status
automount (pid 1442) is running...
On Tue, May 6, 2014 at 2:44 PM, Michael Havens <bmike1 at gmail.com> wrote:
> it isn't automounting.
>
>
> :-)~MIKE~(-:
>
>
> On Tue, May 6, 2014 at 11:41 AM, Michael Havens <bmike1 at gmail.com> wrote:
>
>> got it all to work.... even changed the label name. What messed me up was:
>>
>> $> Command > 1 (press enter 3times) -- again maybe you don't need the
>> one
>>
>> I didn't understand at first that was part of the 'n' command.
>>
>>
>> bmike1 at PresarioLapTop1:/media/bmike1/OpenELEC$ sudo fdisk /dev/sdd
>>
>> Command (m for help): o
>> Building a new DOS disklabel with disk identifier 0x3e8c35b3.
>> Changes will remain in memory only, until you decide to write them.
>> After that, of course, the previous content won't be recoverable.
>>
>> Warning: invalid flag 0x0000 of partition table 4 will be corrected by
>> w(rite)
>>
>> Command (m for help): n
>> Partition type:
>> p primary (0 primary, 0 extended, 4 free)
>> e extended
>> Select (default p): p
>> Partition number (1-4, default 1):
>> Using default value 1
>> First sector (2048-3913663, default 2048):
>> Using default value 2048
>> Last sector, +sectors or +size{K,M,G} (2048-3913663, default 3913663):
>> Using default value 3913663
>>
>> Command (m for help): t
>> Selected partition 1
>> Hex code (type L to list codes): ntfs
>> Hex code (type L to list codes):
>> Hex code (type L to list codes): l
>>
>> 0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris
>>
>> 1 FAT12 27 Hidden NTFS Win 82 Linux swap / So c1 DRDOS/sec
>> (FAT-
>> 2 XENIX root 39 Plan 9 83 Linux c4 DRDOS/sec
>> (FAT-
>> 3 XENIX usr 3c PartitionMagic 84 OS/2 hidden C: c6 DRDOS/sec
>> (FAT-
>> 4 FAT16 <32M 40 Venix 80286 85 Linux extended c7 Syrinx
>>
>> 5 Extended 41 PPC PReP Boot 86 NTFS volume set da Non-FS
>> data
>> 6 FAT16 42 SFS 87 NTFS volume set db CP/M /
>> CTOS / .
>> 7 HPFS/NTFS/exFAT 4d QNX4.x 88 Linux plaintext de Dell
>> Utility
>> 8 AIX 4e QNX4.x 2nd part 8e Linux LVM df BootIt
>>
>> 9 AIX bootable 4f QNX4.x 3rd part 93 Amoeba e1 DOS
>> access
>> a OS/2 Boot Manag 50 OnTrack DM 94 Amoeba BBT e3 DOS R/O
>>
>> b W95 FAT32 51 OnTrack DM6 Aux 9f BSD/OS e4 SpeedStor
>>
>> c W95 FAT32 (LBA) 52 CP/M a0 IBM Thinkpad hi eb BeOS fs
>>
>> e W95 FAT16 (LBA) 53 OnTrack DM6 Aux a5 FreeBSD ee GPT
>>
>> f W95 Ext'd (LBA) 54 OnTrackDM6 a6 OpenBSD ef EFI
>> (FAT-12/16/
>> 10 OPUS 55 EZ-Drive a7 NeXTSTEP f0
>> Linux/PA-RISC b
>> 11 Hidden FAT12 56 Golden Bow a8 Darwin UFS f1 SpeedStor
>>
>> 12 Compaq diagnost 5c Priam Edisk a9 NetBSD f4 SpeedStor
>>
>> 14 Hidden FAT16 <3 61 SpeedStor ab Darwin boot f2 DOS
>> secondary
>> 16 Hidden FAT16 63 GNU HURD or Sys af HFS / HFS+ fb VMware
>> VMFS
>> 17 Hidden HPFS/NTF 64 Novell Netware b7 BSDI fs fc VMware
>> VMKCORE
>> 18 AST SmartSleep 65 Novell Netware b8 BSDI swap fd Linux
>> raid auto
>> 1b Hidden W95 FAT3 70 DiskSecure Mult bb Boot Wizard hid fe LANstep
>>
>> 1c Hidden W95 FAT3 75 PC/IX be Solaris boot ff BBT
>>
>> 1e Hidden W95 FAT1 80 Old Minix
>> Hex code (type L to list codes): 86
>> Changed system type of partition 1 to 86 (NTFS volume set)
>>
>> Command (m for help): b
>> There is no *BSD partition on /dev/sdd.
>>
>> Command (m for help): p
>>
>> Disk /dev/sdd: 2003 MB, 2003795968 bytes
>> 11 heads, 4 sectors/track, 88946 cylinders, total 3913664 sectors
>> Units = sectors of 1 * 512 = 512 bytes
>> Sector size (logical/physical): 512 bytes / 512 bytes
>> I/O size (minimum/optimal): 512 bytes / 512 bytes
>> Disk identifier: 0x3e8c35b3
>>
>> Device Boot Start End Blocks Id System
>> /dev/sdd1 2048 3913663 1955808 86 NTFS volume set
>>
>> Command (m for help): w
>> The partition table has been altered!
>>
>> Calling ioctl() to re-read partition table.
>> Syncing disks.
>> bmike1 at PresarioLapTop1:/media/bmike1/OpenELEC$
>>
>>
>>
>> :-)~MIKE~(-:
>>
>>
>> On Tue, May 6, 2014 at 11:23 AM, Mike Ballon <mike.ballon at gmail.com>wrote:
>>
>>> After the 1 is t, 1 might have been selected for you by default.
>>>
>>> start over...
>>>
>>> $> fdisk /dev/sdd
>>> $> Command > o (create new table)
>>> $> Command > n (create part, 1 would be the default, maybe you don't
>>> need the 1)
>>> $> Command > 1 (press enter 3times) -- again maybe you don't need the one
>>> $> Command > t (select fs type)
>>> $> Command > b (selects fat for fs)
>>> $> Command > p (print the table)
>>> $> Command > w (write the changes)
>>>
>>> don't make me do a video I don't have time ;)
>>>
>>>
>>>
>>> On Tue, May 6, 2014 at 1:57 PM, Michael Havens <bmike1 at gmail.com> wrote:
>>>
>>>> Okay.... I think I really screwed things up. YOu said:
>>>>
>>>> $> fdisk /dev/sdb
>>>> $> Command > o
>>>> $> Command > n
>>>> $> Command > 1 (press enter 3times)
>>>> $> Command > t
>>>> $> Command > b
>>>> $> Command > w
>>>> $> Command > p
>>>>
>>>> ***The above didn't look like that. There was no '$>'
>>>> But I figured your computer was just configured differently
>>>> so I carried on!
>>>>
>>>> bmike1 at PresarioLapTop1:/media/bmike1/OpenELEC$ sudo fdisk /dev/sdd
>>>>
>>>> Command (m for help): o
>>>> Building a new DOS disklabel with disk identifier 0xf66cb38c.
>>>> Changes will remain in memory only, until you decide to write them.
>>>> After that, of course, the previous content won't be recoverable.
>>>>
>>>> Warning: invalid flag 0x0000 of partition table 4 will be corrected by
>>>> w(rite)
>>>>
>>>> Command (m for help): n
>>>> Partition type:
>>>> p primary (0 primary, 0 extended, 4 free)
>>>> e extended
>>>> Select (default p): p
>>>> Partition number (1-4, default 1):
>>>> Using default value 1
>>>> First sector (2048-3913663, default 2048):
>>>> Using default value 2048
>>>> Last sector, +sectors or +size{K,M,G} (2048-3913663, default 3913663):
>>>> Using default value 3913663
>>>>
>>>> Command (m for help): 1
>>>> 1: unknown command
>>>> Command action
>>>> a toggle a bootable flag
>>>> b edit bsd disklabel
>>>> c toggle the dos compatibility flag
>>>> d delete a partition
>>>> l list known partition types
>>>> m print this menu
>>>> n add a new partition
>>>> o create a new empty DOS partition table
>>>> p print the partition table
>>>> q quit without saving changes
>>>> s create a new empty Sun disklabel
>>>> t change a partition's system id
>>>> u change display/entry units
>>>> v verify the partition table
>>>> w write table to disk and exit
>>>> x extra functionality (experts only)
>>>>
>>>> Command (m for help): t
>>>> Selected partition 1
>>>> Hex code (type L to list codes):
>>>> Hex code (type L to list codes): w
>>>> Hex code (type L to list codes): ^[^[
>>>> Hex code (type L to list codes):
>>>> Hex code (type L to list codes): ^Cbmike1 at PresarioLapTop1:/media/bmike1/OpenELEC$
>>>> sudo fdisk /dev/sdd
>>>>
>>>> Command (m for help): o
>>>> Building a new DOS disklabel with disk identifier 0xbdd16f92.
>>>> Changes will remain in memory only, until you decide to write them.
>>>> After that, of course, the previous content won't be recoverable.
>>>>
>>>> Warning: invalid flag 0x0000 of partition table 4 will be corrected by
>>>> w(rite)
>>>>
>>>> Command (m for help): n
>>>> Partition type:
>>>> p primary (0 primary, 0 extended, 4 free)
>>>> e extended
>>>> Select (default p): b
>>>> Invalid partition type `b'
>>>>
>>>> Command (m for help): n
>>>> Partition type:
>>>> p primary (0 primary, 0 extended, 4 free)
>>>> e extended
>>>> Select (default p): p
>>>> Partition number (1-4, default 1):
>>>> Using default value 1
>>>> First sector (2048-3913663, default 2048):
>>>> Using default value 2048
>>>> Last sector, +sectors or +size{K,M,G} (2048-3913663, default 3913663):
>>>> Using default value 3913663
>>>>
>>>> Command (m for help): b
>>>> There is no *BSD partition on /dev/sdd.
>>>>
>>>> Command (m for help): w
>>>> The partition table has been altered!
>>>>
>>>> Calling ioctl() to re-read partition table.
>>>> Syncing disks.
>>>> bmike1 at PresarioLapTop1:/media/bmike1/OpenELEC$ sudo fdisk /dev/sdd
>>>>
>>>> Command (m for help): p
>>>>
>>>> Disk /dev/sdd: 2003 MB, 2003795968 bytes
>>>> 11 heads, 4 sectors/track, 88946 cylinders, total 3913664 sectors
>>>> Units = sectors of 1 * 512 = 512 bytes
>>>> Sector size (logical/physical): 512 bytes / 512 bytes
>>>> I/O size (minimum/optimal): 512 bytes / 512 bytes
>>>> Disk identifier: 0xbdd16f92
>>>>
>>>> Device Boot Start End Blocks Id System
>>>> /dev/sdd1 2048 3913663 1955808 83 Linux
>>>>
>>>> Command (m for help): ^[[B^[[A^[
>>>> [: unknown command
>>>> Command action
>>>> a toggle a bootable flag
>>>> b edit bsd disklabel
>>>> c toggle the dos compatibility flag
>>>> d delete a partition
>>>> l list known partition types
>>>> m print this menu
>>>> n add a new partition
>>>> o create a new empty DOS partition table
>>>> p print the partition table
>>>> q quit without saving changes
>>>> s create a new empty Sun disklabel
>>>> t change a partition's system id
>>>> u change display/entry units
>>>> v verify the partition table
>>>> w write table to disk and exit
>>>> x extra functionality (experts only)
>>>>
>>>> Command (m for help): q
>>>>
>>>> sudo fdisk -l /dev/sdd1
>>>>
>>>> Disk /dev/sdd1: 2001 MB, 2001731584 bytes
>>>> 62 heads, 62 sectors/track, 1017 cylinders, total 3909632 sectors
>>>> Units = sectors of 1 * 512 = 512 bytes
>>>> Sector size (logical/physical): 512 bytes / 512 bytes
>>>> I/O size (minimum/optimal): 512 bytes / 512 bytes
>>>> Disk identifier: 0x20ac7dda
>>>>
>>>> This doesn't look like a partition table
>>>> Probably you selected the wrong device.
>>>>
>>>> Device Boot Start End Blocks Id System
>>>> /dev/sdd1p1 ? 3224498923 3657370039 216435558+ 7
>>>> HPFS/NTFS/exFAT
>>>> /dev/sdd1p2 ? 3272020941 930513678 976730017 16 Hidden FAT16
>>>> /dev/sdd1p3 ? 0 0 0 6f Unknown
>>>> /dev/sdd1p4 50200576 974536369 462167897 0 Empty
>>>>
>>>> Partition table entries are not in disk order
>>>>
>>>> ****Now when I plug the USB drive in and it automounts nothing new
>>>> appears in the file manager. SO I ran another program to see what it says:
>>>>
>>>> bmike1 at PresarioLapTop1:/media/bmike1/OpenELEC$ sudo sfdisk /dev/sdd
>>>> Checking that no-one is using this disk right now ...
>>>> OK
>>>>
>>>> Disk /dev/sdd: 1018 cylinders, 62 heads, 62 sectors/track
>>>> Old situation:
>>>> Warning: The partition table looks like it was made
>>>> for C/H/S=*/11/4 (instead of 1018/62/62).
>>>> For this listing I'll assume that geometry.
>>>> Units = cylinders of 22528 bytes, blocks of 1024 bytes, counting from 0
>>>>
>>>> Device Boot Start End #cyls #blocks Id System
>>>> /dev/sdd1 46+ 88946- 88901- 1955808 83 Linux
>>>> start: (c,h,s) expected (46,6,1) found (1,78,9)
>>>> end: (c,h,s) expected (1023,10,4) found (34,10,4)
>>>> /dev/sdd2 0 - 0 0 0 Empty
>>>> /dev/sdd3 0 - 0 0 0 Empty
>>>> /dev/sdd4 0 - 0 0 0 Empty
>>>> Input in the following format; absent fields get a default value.
>>>> <start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>
>>>> Usually you only need to specify <start> and <size> (and perhaps
>>>> <type>).
>>>>
>>>> /dev/sdd1 :?
>>>> trailing junk after number
>>>>
>>>> /dev/sdd1 :
>>>>
>>>>
>>>> :-)~MIKE~(-:
>>>>
>>>>
>>>> On Tue, May 6, 2014 at 7:29 AM, Mike Ballon <mike.ballon at gmail.com>wrote:
>>>>
>>>>> First I was wrong to say that /dev/sdd1 would not exist it you simply
>>>>> unmounted it. I believe it can vary between a physical system and a VM.
>>>>>
>>>>> -- returns the memory stick i just plugged in and assigns device
>>>>> /dev/sdb
>>>>>
>>>>> $> dmesg
>>>>>
>>>>> [ 452.300827] scsi 3:0:0:0: Direct-Access Kingston DataTraveler
>>>>> 2.0 PMAP PQ: 0 ANSI: 4
>>>>> [ 452.302226] sd 3:0:0:0: Attached scsi generic sg2 type 0
>>>>> [ 452.316528] sd 3:0:0:0: [sdb] 15240576 512-byte logical blocks:
>>>>> (7.80 GB/7.26
>>>>>
>>>>> -- automount presents the stick to me because it has a file system
>>>>>
>>>>> $> mount | grep sdb
>>>>>
>>>>> /dev/sdb1 on /media/UNTITLED type vfat
>>>>>
>>>>> -- fdisk returns the partition info
>>>>>
>>>>> $> fdisk -l /dev/sdb
>>>>>
>>>>> Device Boot Start End Blocks Id System
>>>>> /dev/sdb1 2 15240575 7620287 b W95 FAT32
>>>>>
>>>>> -- use fdisk to delete the partition
>>>>>
>>>>> $> fdisk /dev/sdb
>>>>> $> Command > d
>>>>> $> Command > w
>>>>> $> Command > p
>>>>>
>>>>> Device Boot Start End Blocks Id System
>>>>>
>>>>> -- use fdisk to create the partition
>>>>>
>>>>> $> fdisk /dev/sdb
>>>>> $> Command > o
>>>>> $> Command > n
>>>>> $> Command > 1 (press enter 3times)
>>>>> $> Command > t
>>>>> $> Command > b
>>>>> $> Command > w
>>>>> $> Command > p
>>>>>
>>>>> Device Boot Start End Blocks Id System
>>>>> /dev/sdb1 2048 15240575 7619264 b W95 FAT32
>>>>>
>>>>> -- make the file system if needed, I say if needed because since the
>>>>> partition is exactly the same and the fs is the same, automount mounted the
>>>>> stick for me automagically
>>>>>
>>>>> $> umount /dev/sdb1
>>>>> $> mkfs.vfat /dev/sdb1
>>>>> $> mount /dev/sdb /mnt/foobar
>>>>> $> touch /mnt/foobar/test.txt
>>>>> $> ls /mnt/fobar
>>>>>
>>>>> test.txt
>>>>>
>>>>> -- oops forgot the renaming of volume, I'm on debian so
>>>>>
>>>>> $> apt-get install mtools
>>>>>
>>>>> Setting up mtools (4.0.17-1) ...
>>>>>
>>>>> $> mlabel -i /dev/sdb1 ::usb_stick
>>>>>
>>>>> again... gparted is your friend
>>>>>
>>>>>
>>>>> On Tue, May 6, 2014 at 9:42 AM, Mike Ballon <mike.ballon at gmail.com>wrote:
>>>>>
>>>>>> if you unmounted then /dev/sdd1 would no longer be there.
>>>>>>
>>>>>> Give me a few mins and I'll spin up a VM (I'm on a Mac) and I'll run
>>>>>> through all the steps for you.
>>>>>>
>>>>>>
>>>>>> On Tue, May 6, 2014 at 3:34 AM, Michael Havens <bmike1 at gmail.com>wrote:
>>>>>>
>>>>>>> bummer.... new drive:
>>>>>>>
>>>>>>> mount
>>>>>>> ...
>>>>>>> /dev/sdd1 on /media/bmike1/OpenELEC type vfat
>>>>>>> (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
>>>>>>> <unmout device with file manager>
>>>>>>> bmike1 at PresarioLapTop1:/media/bmike1/OpenELEC$ sudo mkfs -t vfat
>>>>>>> /dev/sdd1
>>>>>>> mkfs.vfat 3.0.13 (30 Jun 2012)
>>>>>>> /dev/sdd1: No such file or directory
>>>>>>> bmike1 at PresarioLapTop1:/media/bmike1/OpenELEC$
>>>>>>> bmike1 at PresarioLapTop1:/media/bmike1/OpenELEC$ sudo mkfs -t vfat
>>>>>>> /dev/sdd1
>>>>>>> mkfs.vfat 3.0.13 (30 Jun 2012)
>>>>>>> /dev/sdd1: No such file or directory
>>>>>>> bmike1 at PresarioLapTop1:/media/bmike1/OpenELEC$ sudo e2label
>>>>>>> /dev/sdd1 Pny2G
>>>>>>> e2label: No such file or directory while trying to open /dev/sdd1
>>>>>>> Couldn't find valid filesystem superblock.
>>>>>>>
>>>>>>> what am I doing wrong?
>>>>>>>
>>>>>>> :-)~MIKE~(-:
>>>>>>>
>>>>>>>
>>>>>>> On Mon, May 5, 2014 at 8:28 PM, Michael Havens <bmike1 at gmail.com>wrote:
>>>>>>>
>>>>>>>> that wouldn't change a vfat system but it inspired the correct
>>>>>>>> search terms and I found 'dosfslabel'. Thanks for the help, man:D
>>>>>>>>
>>>>>>>> :-)~MIKE~(-:
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mon, May 5, 2014 at 7:50 PM, Ryan Rix <ry at n.rix.si> wrote:
>>>>>>>>
>>>>>>>>> Yeah, you're right Mike.
>>>>>>>>>
>>>>>>>>> https://help.ubuntu.com/community/RenameUSBDrive#FAT16_and_FAT32
>>>>>>>>>
>>>>>>>>> Michael Havens <bmike1 at gmail.com> writes:
>>>>>>>>> > same thing:
>>>>>>>>> >
>>>>>>>>> > sudo e2label /dev/sdd1 Goodwill
>>>>>>>>> > e2label: Bad magic number in super-block while trying to open
>>>>>>>>> > /dev/sdd1
>>>>>>>>> > Couldn't find valid filesystem superblock.
>>>>>>>>> >
>>>>>>>>> > could it be because it is a vfat file system? (while I love
>>>>>>>>> linux I
>>>>>>>>> > like to have the ability for my flash drives to be used on common
>>>>>>>>> > computers)
>>>>>>>>> >
>>>>>>>>> > :-)~MIKE~(-:
>>>>>>>>> >
>>>>>>>>> > On Mon, May 5, 2014 at 5:51 PM, Mike Ballon <
>>>>>>>>> mike.ballon at gmail.com>
>>>>>>>>> > wrote:
>>>>>>>>> >
>>>>>>>>> > It's I file system label so yes, you'll need to format. If
>>>>>>>>> there
>>>>>>>>> > is no partition will have to create a partition before you
>>>>>>>>> can do
>>>>>>>>> > a mkfs gparted should do all that for you
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > On May 5, 2014 7:47 PM, "Michael Havens" <bmike1 at gmail.com>
>>>>>>>>> wrote:
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > Thanks Mike. Does this error mean I need to format the
>>>>>>>>> drive?
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > sudo e2label /dev/sdc1 Goodwill
>>>>>>>>> > e2label: Bad magic number in super-block while trying to
>>>>>>>>> open
>>>>>>>>> > /dev/sdc1
>>>>>>>>> > Couldn't find valid filesystem superblock.
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > This is what 'mount' shows sdc1 to be:
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > /dev/sdc1 on /media/bmike1/OpenELEC type vfat
>>>>>>>>> >
>>>>>>>>> (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,
>>>>>>>>> > showexec,flush,uhelper=udisks2)
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > and to format this and apply the label it would be:
>>>>>>>>> >
>>>>>>>>> > mkfs -t vfat /dev/sdc1;e2label /dev/sdc1 Goodwill
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > :-)~MIKE~(-:
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > On Mon, May 5, 2014 at 4:08 PM, Mike Ballon
>>>>>>>>> > <mike.ballon at gmail.com> wrote:
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > e2label
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > On Mon, May 5, 2014 at 7:05 PM, Michael Havens
>>>>>>>>> > <bmike1 at gmail.com> wrote:
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > I have a few flash drives. When I plug them in
>>>>>>>>> to my
>>>>>>>>> > computer a name referring to that flash drive
>>>>>>>>> appears
>>>>>>>>> > in the file manager. I have two questions: the
>>>>>>>>> first
>>>>>>>>> > is how do I change that name? The second is how
>>>>>>>>> do I
>>>>>>>>> > set that name when I format the drive?
>>>>>>>>> >
>>>>>>>>> > :-)~MIKE~(-:
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> ---------------------------------------------------
>>>>>>>>> > PLUG-discuss mailing list -
>>>>>>>>> > PLUG-discuss at lists.phxlinux.org
>>>>>>>>> > To subscribe, unsubscribe, or to change your mail
>>>>>>>>> > settings:
>>>>>>>>> >
>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > ---------------------------------------------------
>>>>>>>>> > PLUG-discuss mailing list -
>>>>>>>>> > PLUG-discuss at lists.phxlinux.org
>>>>>>>>> > To subscribe, unsubscribe, or to change your mail
>>>>>>>>> > settings:
>>>>>>>>> >
>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > ---------------------------------------------------
>>>>>>>>> > PLUG-discuss mailing list -
>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>> > To subscribe, unsubscribe, or to change your mail
>>>>>>>>> settings:
>>>>>>>>> > http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>> >
>>>>>>>>> > ---------------------------------------------------
>>>>>>>>> > PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>> > To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>> > http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > ---------------------------------------------------
>>>>>>>>> > PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>> > To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>> > http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>> ---------------------------------------------------
>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> ---------------------------------------------------
>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> ---------------------------------------------------
>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>
>>>>
>>>>
>>>> ---------------------------------------------------
>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>
>>>
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>
>>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20140506/c8e4b657/attachment.html>
More information about the PLUG-discuss
mailing list