Need Help with Knoppix

[Mark Phillips]

Thanks. I will have to tear into the hardware tomorrow to see what I find.

Mark


On Tue, Feb 4, 2014 at 2:46 AM, Michael Butash <michael at butash.net> wrote:

> I think it's pooped out... and it only sees one.
>
>  [    5.956680] ata3: link is slow to respond, please be patient (ready=0)
>>
>> [   10.970015] ata3: device not ready (errno=-16), forcing hardreset
>> [   16.136680] ata3: link is slow to respond, please be patient (ready=0)
>> [   20.990011] ata3: SRST failed (errno=-16)
>> [   26.156678] ata3: link is slow to respond, please be patient (ready=0)
>> [   31.010012] ata3: SRST failed (errno=-16)
>> [   36.176675] ata3: link is slow to respond, please be patient (ready=0)
>> [   66.043340] ata3: SRST failed (errno=-16)
>> [   71.050008] ata3: SRST failed (errno=-16)
>> [   71.061817] ata3: reset failed, giving up
>>
>
> This was a bit interesting though:
>
> [    0.939779] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0
> irq 14
>
> [    0.939783] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8
> irq 15
> [    0.939875] ata1: port disabled--ignoring
> [    0.943281] pata_sil680 0000:01:07.0: version 0.4.9
> [    0.943325] sil680: 133MHz clock.
> [    0.944316] scsi2 : pata_sil680
> [    0.944507] scsi3 : pata_sil680
> [    0.944666] ata3: PATA max UDMA/133 cmd 0xecf8 ctl 0xecf0 bmdma 0xecc0
> irq 16
> [    0.944671] ata4: PATA max UDMA/133 cmd 0xece0 ctl 0xecd8 bmdma 0xecc8
> irq 16
> [    0.945455] Error: Driver 'pata_platform' is already registered,
> aborting...
>
> It sees the one on ata3, and read your cdrom, but the drive is stalling
> response, not sure that's not due to kernel oddities though at the end of
> that.  Check the status of the drives in the bios, it should usually
> register or show them in legacy bios ata devices. Can try to play with the
> ata modes in the bios.
>
> Maybe try changing the modes or jumpers, maybe they're both master
> devices?  Mmm, master/slave jumpers, makes me feel old to remember them on
> drives...
>
> Try one at a time too to rule it out, or another controller.
>
> -mb
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20140204/fcfdb798/attachment.html>