network guys

[Michael Havens]

As I've learned from experience! Thanks for the help,guys. Now for the
million dollar question; why does it introduce errors?
:-)~MIKE~(-:


On Mon, Feb 11, 2013 at 12:37 PM, Gilbert T. Gutierrez, Jr. <
mailing-lists at phoenixinternet.net> wrote:

> Mike,
> It does matter the order. What you were taught would introduce all forms
> of errors.
>
> in the connector from left to right with the copper contacts and the cable
> crimp facing you...
>
> B Standard (Most commonly used)
> Pin 1: orange white
> Pin 2: orange
> Pin 3: green white
> Pin 4: blue
> Pin 5: blue white
> Pin 6: green
> Pin 7: brown white
> Pin 8: brown
>
> A Standard
> Pin 1: green white
> Pin 2: green
> Pin 3: orange white
> Pin 4: blue
> Pin 5: blue white
> Pin 6: orange
> Pin 7: brown white
> Pin 8: brown
>
> To make a standard cable, both cables sides should be the same. To make a
> crossover cable, you crimp one side A and the other side B. You will also
> find differences in cable that will cause issues with some cable ends.
> Never strip the insulation off of the conductors and make sure that you
> have cable insulation inside the retaining crimp of the connector to
> relieve strain on the cable.
>
> Gilbert
>
>
> On 2/10/2013 10:25 PM, Michael Havens wrote:
>
>> so then (my cables are stripe, solid) the proper way to do it is:
>>
>>   stripe orange,orange
>>   stripe green,blue
>>   stripe blue,green
>>   stripe brown,brown
>>
>> I was taught,
>>
>>   blue, stripe blue
>>   green, stripe orange
>>   orange, stripe green
>>   brown, stripe brown
>> :-)~MIKE~(-:
>>
>>
> ------------------------------**---------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.**org<PLUG-discuss at lists.phxlinux.org>
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/**mailman/listinfo/plug-discuss<http://lists.phxlinux.org/mailman/listinfo/plug-discuss>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20130211/4f2de457/attachment.html>